From ecdbb3d1d924163e38a91848816353953dd3d5ec Mon Sep 17 00:00:00 2001 From: Richard Mudgett Date: Thu, 27 Jan 2011 00:06:27 +0000 Subject: Merged from revision 304341 https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier .......... r304341 | rmudgett | 2011-01-26 16:38:39 -0600 (Wed, 26 Jan 2011) | 7 lines Add connected line chan_dahdi.conf pricpndialplan option. * Added from_channel value to prilocaldialplan option. JIRA ABE-2731 JIRA SWP-2842 .......... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304385 65c4cc65-6c06-0410-ace0-fbb531ad65f3 --- configs/chan_dahdi.conf.sample | 59 ++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 16 deletions(-) (limited to 'configs/chan_dahdi.conf.sample') diff --git a/configs/chan_dahdi.conf.sample b/configs/chan_dahdi.conf.sample index 0c0bed722..c176789a6 100644 --- a/configs/chan_dahdi.conf.sample +++ b/configs/chan_dahdi.conf.sample @@ -92,33 +92,59 @@ ; Send out the specified digits as keypad digits. ; ; PRI Dialplan: The ISDN-level Type Of Number (TON) or numbering plan, used for -; the dialed number. For most installations, leaving this as 'unknown' (the -; default) works in the most cases. In some very unusual circumstances, you -; may need to set this to 'dynamic' or 'redundant'. Note that if you set one -; of the others, you will be unable to dial another class of numbers. For -; example, if you set 'national', you will be unable to dial local or -; international numbers. +; the dialed number. Leaving this as 'unknown' (the default) works for most +; cases. In some very unusual circumstances, you may need to set this to +; 'dynamic' or 'redundant'. +; +; unknown: Unknown +; private: Private ISDN +; local: Local ISDN +; national: National ISDN +; international: International ISDN +; dynamic: Dynamically selects the appropriate dialplan using the +; prefix settings. +; redundant: Same as dynamic, except that the underlying number is not +; changed (not common) +; +; pridialplan cannot be changed on reload. +;pridialplan=unknown ; ; PRI Local Dialplan: Only RARELY used for PRI (sets the calling number's ; numbering plan). In North America, the typical use is sending the 10 digit ; callerID number and setting the prilocaldialplan to 'national' (the default). ; Only VERY rarely will you need to change this. ; -; Neither pridialplan nor prilocaldialplan can be changed on reload. -; ; unknown: Unknown ; private: Private ISDN ; local: Local ISDN ; national: National ISDN ; international: International ISDN -; dynamic: Dynamically selects the appropriate dialplan +; from_channel: Use the CALLERID(ton) value from the channel. +; dynamic: Dynamically selects the appropriate dialplan using the +; prefix settings. ; redundant: Same as dynamic, except that the underlying number is not ; changed (not common) ; -;pridialplan=unknown +; prilocaldialplan cannot be changed on reload. ;prilocaldialplan=national ; -; pridialplan may be also set at dialtime, by prefixing the dialled number with +; PRI Connected Line Dialplan: Sets the connected party number's numbering plan. +; +; unknown: Unknown +; private: Private ISDN +; local: Local ISDN +; national: National ISDN +; international: International ISDN +; from_channel: Use the CONNECTEDLINE(ton) value from the channel. +; dynamic: Dynamically selects the appropriate dialplan using the +; prefix settings. +; redundant: Same as dynamic, except that the underlying number is not +; changed (not common) +; +; pricpndialplan cannot be changed on reload. +;pricpndialplan=from_channel +; +; pridialplan may be also set at dialtime, by prefixing the dialed number with ; one of the following letters: ; U - Unknown ; I - International @@ -129,7 +155,7 @@ ; R - Reserved (should probably never be used but is included for completeness) ; ; Additionally, you may also set the following NPI bits (also by prefixing the -; dialled string with one of the following letters): +; dialed string with one of the following letters): ; u - Unknown ; e - E.163/E.164 (ISDN/telephony) ; x - X.121 (Data) @@ -139,10 +165,11 @@ ; r - Reserved (should probably never be used but is included for completeness) ; ; You may also set the prilocaldialplan in the same way, but by prefixing the -; Caller*ID Number, rather than the dialled number. Please note that telcos -; which require this kind of additional manipulation of the TON/NPI are *rare*. -; Most telco PRIs will work fine simply by setting pridialplan to unknown or -; dynamic. +; Caller*ID Number rather than the dialed number. + +; Please note that telcos which require this kind of additional manipulation +; of the TON/NPI are *rare*. Most telco PRIs will work fine simply by +; setting pridialplan to unknown or dynamic. ; ; ; PRI caller ID prefixes based on the given TON/NPI (dialplan) -- cgit v1.2.3