From fc0fecb4768d696db3324bcf6dd03325bb4cd513 Mon Sep 17 00:00:00 2001 From: Matthew Jordan Date: Thu, 17 Jul 2014 21:17:28 +0000 Subject: configs: Move sample config files into a subdirectory of configs This moves all samples configs from configs/ to configs/samples. This allows for additional sets of sample configuration files to be added in the future. Review: https://reviewboard.asterisk.org/r/3804/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3 --- configs/mgcp.conf.sample | 142 ----------------------------------------------- 1 file changed, 142 deletions(-) delete mode 100644 configs/mgcp.conf.sample (limited to 'configs/mgcp.conf.sample') diff --git a/configs/mgcp.conf.sample b/configs/mgcp.conf.sample deleted file mode 100644 index 7c725bc3d..000000000 --- a/configs/mgcp.conf.sample +++ /dev/null @@ -1,142 +0,0 @@ -; -; MGCP Configuration for Asterisk -; -[general] -;port = 2427 -;bindaddr = 0.0.0.0 - -; See https://wiki.asterisk.org/wiki/display/AST/IP+Quality+of+Service for a description of these parameters. -;tos=cs3 ; Sets TOS for signaling packets. -;tos_audio=ef ; Sets TOS for RTP audio packets. -;cos=3 ; Sets 802.1p priority for signaling packets. -;cos_audio=5 ; Sets 802.1p priority for RTP audio packets. - -;---------------------- DIGIT TIMEOUTS ---------------------------- -firstdigittimeout = 30000 ; default 16000 = 16s -gendigittimeout = 10000 ; default 8000 = 8s -matchdigittimeout = 5000 ; defaults 3000 = 3s - -;------------------------------ JITTER BUFFER CONFIGURATION -------------------------- -; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a - ; MGCP channel. Defaults to "no". An enabled jitterbuffer will - ; be used only if the sending side can create and the receiving - ; side can not accept jitter. The MGCP channel can accept jitter, - ; thus an enabled jitterbuffer on the receive MGCP side will only - ; be used if the sending side can create jitter and jbforce is - ; also set to yes. - -; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a MGCP - ; channel. Defaults to "no". - -; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds. - -; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is - ; resynchronized. Useful to improve the quality of the voice, with - ; big jumps in/broken timestamps, usually sent from exotic devices - ; and programs. Defaults to 1000. - -; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a MGCP - ; channel. Two implementations are currently available - "fixed" - ; (with size always equals to jbmax-size) and "adaptive" (with - ; variable size, actually the new jb of IAX2). Defaults to fixed. - -; jbtargetextra = 40 ; This option only affects the jb when 'jbimpl = adaptive' is set. - ; The option represents the number of milliseconds by which the new - ; jitter buffer will pad its size. the default is 40, so without - ; modification, the new jitter buffer will set its size to the jitter - ; value plus 40 milliseconds. increasing this value may help if your - ; network normally has low jitter, but occasionally has spikes. - -; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no". -;----------------------------------------------------------------------------------- - -;[dlinkgw] -;host = 192.168.0.64 -;context = default -;directmedia = no -;line => aaln/2 -;line => aaln/1 - -;; The MGCP channel supports the following service codes: -;; # - Transfer -;; *67 - Calling Number Delivery Blocking -;; *70 - Cancel Call Waiting -;; *72 - Call Forwarding Activation -;; *73 - Call Forwarding Deactivation -;; *78 - Do Not Disturb Activation -;; *79 - Do Not Disturb Deactivation -;; *8 - Call pick-up -; -; known to work with Swissvoice IP10s -;[192.168.1.20] -;context=local -;host=192.168.1.20 -;callerid = "John Doe" <123> -;callgroup=0 ; in the range from 0 to 63 -;pickupgroup=0 ; in the range from 0 to 63 -;nat=no -;threewaycalling=yes -;transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to transfer -;callwaiting=yes ; this might be a cause of trouble for ip10s -;cancallforward=yes -;line => aaln/1 -; - -;[dph100] -; -; Supporting the DPH100M requires defining DLINK_BUGGY_FIRMWARE in -; chan_mgcp.c in addition to enabling the slowsequence mode due to -; bugs in the D-Link firmware -; -;context=local -;host=dynamic -;dtmfmode=none ; DTMF Mode can be 'none', 'rfc2833', or 'inband' or - ; 'hybrid' which starts in none and moves to inband. Default is none. -;slowsequence=yes ; The DPH100M does not follow MGCP standards for sequencing -;line => aaln/1 - -; known to work with wave7optics FTTH LMGs -;[192.168.1.20] -;accountcode = 1000 ; record this in cdr as account identification for billing -;amaflags = billing ; record this in cdr as flagged for 'billing', - ; 'documentation', or 'omit' -;context = local -;host = 192.168.1.20 -;wcardep = aaln/* ; enables wildcard endpoint and sets it to 'aaln/*' - ; another common format is '*' -;callerid = "Duane Cox" <123> ; now lets setup line 1 using per endpoint configuration... -;callwaiting = no -;callreturn = yes -;cancallforward = yes -;directmedia = no -;transfer = no -;dtmfmode = inband -;setvar=one=1 ; Set channel variables associated with this incoming line -;setvar=two=2 -;line => aaln/1 ; now lets save this config to line1 aka aaln/1 -;clearvars=all ; Reset list of variables back to none -;callerid = "Duane Cox" <456> ; now lets setup line 2 -;callwaiting = no -;callreturn = yes -;cancallforward = yes -;directmedia = no -;transfer = no -;dtmfmode = inband -;line => aaln/2 ; now lets save this config to line2 aka aaln/2 - -; PacketCable -;[sbv5121e-mta.test.local] -;host = 10.0.1.3 -;callwaiting = 1 -;canreinvite = 1 -;dtmfmode = rfc2833 -;amaflags = BILLING -;ncs = yes ; Use NCS 1.0 signalling -;pktcgatealloc = yes ; Allocate DQOS gate on CMTS -;hangupongateremove = yes ; Hangup the channel if the CMTS close the gate -;callerid = 3622622225 -;accountcode = test-3622622225 -;line = aaln/1 -;callerid = 3622622226 -;accountcode = test-3622622226 -;line = aaln/2 -- cgit v1.2.3