From bbf7c462ce8f238d2f518fee1f5077d30134ec21 Mon Sep 17 00:00:00 2001 From: Mark Spencer Date: Thu, 26 Jul 2001 14:28:30 +0000 Subject: Version 0.1.9 from FTP git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343 65c4cc65-6c06-0410-ace0-fbb531ad65f3 --- configs/zapata.conf.sample | 161 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 161 insertions(+) create mode 100755 configs/zapata.conf.sample (limited to 'configs') diff --git a/configs/zapata.conf.sample b/configs/zapata.conf.sample new file mode 100755 index 000000000..abff98818 --- /dev/null +++ b/configs/zapata.conf.sample @@ -0,0 +1,161 @@ +; +; Zapata telephony interface +; +; Configuration file + +[channels] +; +; Default language +; +;language=en +; +; Default context +; +context=default +; +; Switchtype: Only used for PRI. +; +; national: National ISDN +; dms100: Nortel DMS100 +; 4ess: AT&T 4ESS +; 5ess: Lucent 5ESS +; +switchtype=national +; +; Signalling method (default is fxs). Valid values: +; em: E & M +; em_w: E & M Wink +; featd: Feature Group D (The fake, Adtran style) +; fxs_ls: FXS (Loop Start) +; fxs_gs: FXS (Ground Start) +; fxs_ks: FXS (Kewl Start) +; fxo_ls: FXO (Loop Start) +; fxo_gs: FXO (Ground Start) +; fxo_ks: FXO (Kewl Start) +; pri_cpe: PRI signalling, CPE side +; pri_net: PRI signalling, Network side +; +signalling=fxo_ls +; +; A variety of timing parameters can be specified as well +; Including: +; prewink: Pre-wink time +; preflash: Pre-flash time +; wink: Wink time +; flash: Flash time +; start: Start time +; rxwink: Receiver wink time +; rxflash: Receiver flashtime +; debounce: Debounce timing +; +rxwink=300 ; Atlas seems to use long (250ms) winks +; +; Whether or not to use caller ID +; +usecallerid=yes +; +; Whether or not to hide outgoing caller ID (Override with *67 or *82) +; +hidecallerid=no +; +; Whether or not to enable call waiting on FXO lines +; +callwaiting=yes +; +; Support Caller*ID on Call Waiting +; +callwaitingcallerid=yes +; +; Support three-way calling +; +threewaycalling=yes +; +; Support flash-hook call transfer (requires three way calling) +; +transfer=yes +; +; Enable echo cancellation +; +echocancel=yes +; +; You may also set the default receive and transmit gains (in dB) +; +rxgain=0.0 +txgain=0.0 +; +; Logical groups can be assigned to allow outgoing rollover. Groups +; range from 0 to 31, and multiple groups can be specified. +; +group=1 +; +; Specify whether the channel should be answered immediately or +; if the simple switch should provide dialtone, read digits, etc. +; +immediate=no +; +; CallerID can be set to "asreceived" or a specific number +; if you want to override it. Note that "asreceived" only +; applies to trunk interfaces. +; +;callerid=2564286000 +; +; Each channel consists of the channel number or range. It +; inherits the parameters that were specified above its declaration +; +;callerid="Green Phone"<(256) 428-6121> +;channel => 1 +;callerid="Black Phone"<(256) 428-6122> +;channel => 2 +;callerid="CallerID Phone" <(256) 428-6123> +;callerid="CallerID Phone" <(630) 372-1564> +;callerid="CallerID Phone" <(256) 704-4666> +;channel => 3 +;callerid="Pac Tel Phone" <(256) 428-6124> +;channel => 4 +;callerid="Uniden Dead" <(256) 428-6125> +;channel => 5 +;callerid="Cortelco 2500" <(256) 428-6126> +;channel => 6 +;callerid="Main TA 750" <(256) 428-6127> +;channel => 44 +; +; For example, maybe we have some other channels +; which start out in a different context and use +; E & M signalling instead. +; +;context=remote +;sigalling=em +;channel => 15 +;channel => 16 + +;signalling=em_w +; +; All those in group 0 I'll use for outgoing calls +; +; Strip most significant digit (9) before sending +; +stripmsd=1 +;callerid=asreceived +;group=0 +;signalling=fxs_ls +;channel => 45 + +;signalling=fxo_ls +;group=1 +;callerid="Joe Schmoe" <(256) 428-6131> +;channel => 25 +;callerid="Megan May" <(256) 428-6132> +;channel => 26 +;callerid="Suzy Queue" <(256) 428-6233> +;channel => 27 +;callerid="Larry Moe" <(256) 428-6234> +;channel => 28 +; +; Sample PRI (CPE) config: Specify the switchtype, the signalling as +; either pri_cpe or pri_net for CPE or Network termination, and generally +; you will want to create a single "group" for all channels of the PRI. +; +; switchtype = national +; sig = pri_cpe +; group = 2 +; channel => 1-23 -- cgit v1.2.3