From f5e5a443cf035f2bb8334ac6c0c3d01fb19d0f2c Mon Sep 17 00:00:00 2001 From: Mark Michelson Date: Tue, 20 Nov 2007 16:11:19 +0000 Subject: Changed occurrences of "busy-level" to "busylevel" in sip.conf.sample in light of commit 89441. Thanks to pj for pointing out the need for this (closes issue #11307, reported by pj) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89453 65c4cc65-6c06-0410-ace0-fbb531ad65f3 --- configs/sip.conf.sample | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'configs') diff --git a/configs/sip.conf.sample b/configs/sip.conf.sample index 8236390a8..ae04d37bd 100644 --- a/configs/sip.conf.sample +++ b/configs/sip.conf.sample @@ -210,8 +210,8 @@ srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; for a device. When the call limit is filled, we will indicate busy. Note that ; you need at least 2 in order to be able to do attended transfers. ; -; If you set the busy-level in addition to the call limit, we will indicate busy -; when we have a number of calls that matches busy-level, but still allow calls +; If you set the busylevel in addition to the call limit, we will indicate busy +; when we have a number of calls that matches busylevel, but still allow calls ; up to the call-limit. This allows for transfers while still having blinking ; lamps and queues understanding that a device is busy. ; @@ -569,7 +569,7 @@ srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; videosupport videosupport ; maxcallbitrate maxcallbitrate ; rfc2833compensate mailbox -; busy-level +; busylevel ; username ; template ; fromdomain @@ -606,7 +606,7 @@ srvlookup=yes ; Enable DNS SRV lookups on outbound calls ;call-limit=5 ; permit only 5 simultaneous outgoing calls to this peer ; Call-limits will not be enforced on real-time peers, ; since they are not stored in-memory -;busy-level=2 ; Signal busy at 2 or more calls +;busylevel=2 ; Signal busy at 2 or more calls ;outboundproxy=proxy.provider.domain ; send outbound signaling to this proxy, not directly to the peer ;port=80 ; The port number we want to connect to on the remote side ; Also used as "defaultport" in combination with "defaultip" settings -- cgit v1.2.3