; Radio Repeater / Remote Base configuration file (for use with app_rpt) ; ;[000] ; Node ID of first repeater ;rxchannel = Zap/1 ; Rx audio/signalling channel ; Note: if you use a unified interface (tx/rx on one channel), only ; specify the rxchannel and the txchannel will be assumed from the rxchannel ;txchannel = Zap/2 ; Tx audio/signalling channel ;tonezone = us ; use US tones (default) ;simple = no ; Not in "simple" mode ;context = default ; dialing context for phone ;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls ;idrecording = wb6nil ; id recording ;accountcode=RADIO ; account code (optional) ;hangtime=1000 ; squelch tail hang time (in ms) (optional) ;totime=100000 ; transmit time-out time (in ms) (optional) ;idtime=30000 ; id interval time (in ms) (optional) politeid=30000 ; time in milliseconds before ID timer ; expires to try and ID in the tail. ; (optional, default is 30000). ; The default values for hangtime, time-out time, and id interval time are ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) ; respectively ;[001] ; Node ID of second repeater ;rxchannel = Zap/3 ; Rx audio/signalling channel ; Note: if you use a unified interface (tx/rx on one channel), only ; specify the rxchannel and the txchannel will be assumed from the rxchannel ;txchannel = Zap/4 ; Tx audio/signalling channel ;tonezone = us ; use US tones (default) ;simple = no ; Not in "simple" mode ;context = default ; dialing context for phone ;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls ;idrecording = wb6nil ; id recording ;accountcode=RADIO ; account code (optional) ;hangtime=1000 ; squelch tail hang time (in ms) (optional) ;totime=100000 ; transmit time-out time (in ms) (optional) ;idtime=30000 ; id interval time (in ms) (optional) ;[002] ; Node ID of remote base ;rxchannel = Zap/5 ; Rx audio/signalling channel ; Note: if you use a unified interface (tx/rx on one channel), only ; specify the rxchannel and the txchannel will be assumed from the rxchannel ;txchannel = Zap/6 ; Tx audio/signalling channel ;remote = yes ;iobase = 0x378 ; Specify IO port for parallel port (optional) [nodes] 000 = context_A@1.2.3.4/1234 001 = context_B@5.6.7.8/4321 ;of course, you can also specify these with domain names, but why rely ;on DNS working unnecessarily? [memory] ; this example gives you 146.460, simplex, 100.0 HZ PL, hi-power, transmit PL 00 = 146.460,100.0,sht ; this example gives you 146.940, minus offset, 100.0 HZ PL, low-power, no PL 01 = 146.940,100.0,-l ; The format for these entries is: Receive-Freq,Receive-PL,Attrbutes ; Attributes: l=low power, m=medium power, h=high power, -=minus offset, ; s=simplex, +=plus offset, t=tx PL enable, r=rx PL enable