diff options
author | Tzafrir Cohen <tzafrir.cohen@xorcom.com> | 2009-01-18 09:55:48 +0000 |
---|---|---|
committer | Tzafrir Cohen <tzafrir.cohen@xorcom.com> | 2009-01-18 09:55:48 +0000 |
commit | a1bf03fb56c24e1eb027c9d258524845b49520fd (patch) | |
tree | 41fa4bf87faacf1979e54ac579c5dcc65e1c62aa /drivers/dahdi/xpp/init_card_4_30 | |
parent | 94efc5f49643bdb402e45a64bc595e54e751e23c (diff) |
xpp.r6616: More sysfs migration, FXO enhancements, BRI fixes
* Fix cases where the command_queue overflowed during initialization.
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5663 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Diffstat (limited to 'drivers/dahdi/xpp/init_card_4_30')
-rwxr-xr-x | drivers/dahdi/xpp/init_card_4_30 | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/dahdi/xpp/init_card_4_30 b/drivers/dahdi/xpp/init_card_4_30 index 1748ac2..6d56398 100755 --- a/drivers/dahdi/xpp/init_card_4_30 +++ b/drivers/dahdi/xpp/init_card_4_30 @@ -58,7 +58,7 @@ use Getopt::Std; my $program = basename("$0"); my $init_dir = dirname("$0"); -BEGIN { $init_dir = dirname($0); unshift(@INC, "$init_dir", "$init_dir/zconf"); } +BEGIN { $init_dir = dirname($0); unshift(@INC, "$init_dir"); } use XppConfig $init_dir; my $unit_id; my %opts; |