Age | Commit message (Collapse) | Author |
|
- This is a minimal patch
- More work should be done (e.g: auto_registration etc.)
|
|
OLD_PROC marked old and unused code that was used for writing to procfs.
It has long ago been replaced with different sysfs interfaces. Time
to remove it.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9916 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This reverts commit bab264ce3cb81098ff5b450f7c94a44a10f95dec.
|
|
|
|
These fields do not have anything to do with the span.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
|
|
Increasingly, spans are implemented by devices that support more than a
single span. Introduce a 'struct dahdi_device' object which explicitly
contains multiple spans. This will also allow a cleaner representation
of spans and devices in sysfs since order of arrival will not determine
the layout of the devices. This also gives the core of dahdi a way to
know the relationship between spans.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
|
|
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9727 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9713 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9712 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9711 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Caller to CALL_XMETHOD() no longer need to explicitly pass xbus
(calculate xpd->xbus)
* Create CALL_PHONE_METHOD() similar to CALL_XMETHOD() -- inlining
the extra parameters (more readable)
* Reverse parameter order in PHONE_METHOD() and CALL_PHONE_METHOD()
to be consistent with XMETHOD() and CALL_XMETHOD()
* Rename XPD_STATE phonedev method to card_state:
- Consistency with other phonedev methods.
- These calls now Wrap internal calls to XPD_STATE protocol HOSTCMD
in PRI, BRI, FXS, FXO
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9706 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Add IS_PHONEDEV(xpd) macro
* Reject dahdi_register_xpd()/dahdi_unregister_xpd() for non-PHONEDEV
* Make sysfs 'offhook' attribute contain '\n' if empty (no channels)
* Skip PHONEDEV related xbus_tick() parts -- we still want to process
the end of it for the card_tick() calls.
* Remove BUG_ON() for missing phoneops
(also remove old duplicate test for XBUS_IS...)
* Call XPD_STATE method only for PHONEDEV XPD's
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9705 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Allow having XPDs that represent a device that is not a span.
* Refactor all span related data from 'struct xpd' to 'struct phonedev'
* Refactor span related methods into 'phonedev->phoneops'
* Refactor phone related initialization into phonedev_init()/phonedev_cleanup()
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9704 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
DAHDI_MAINT_LOOPSTOP is being removed due to the redundancy with
DAHDI_MAINT_NONE. Also removing some timing logic, as amount of time a
loopup or loopdown signal is held on the line, is now defined in
userspace with dahdi_maint.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9515 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The dahdi_span->maintq wait queue was very old and not being used so it
has been removed.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom..com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9514 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
One more thing that can be moved out of the per-span structure.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8986 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Part of preparation for adding additional callbacks to allow board
drivers to advertise and support gathering pre-echocan data from hardware
echocans.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8985 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The vast majority of board drivers already keep the dahdi_span structure
in a driver specific structure. The others were easily converted. This
way board drivers can use the container_of macro to find what was
previously pointed to by the "pvt" member of the span. One less thing
to think about in the span structure.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8984 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Now get_xbus() receive and xbus number (not poiner) and uses xbus_num()
internally to map it to an xbus pointer + refcount increment. (this is
atomic)
* Migrate all obvious places that used xbus_num() to map bus number into a
pointer, so now they use get_xbus() + put_xbus() to aquire and release an
xbus.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8913 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* PRI devices always get SYNC-AB (never PLL, not even for NT)
* Fix Timing priority calculation accordingly.
* On PRI layer1 changes, elect_syncer() is called, so we have
re-election.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8909 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Astribanks no longer live directly under the USB devices in the device tree.
* The 'transport' link does point there as before, however.
* When the USB device disconnects, we keep references to them to make sure
they don't disappear.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8900 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Supports only our current NEON notification.
* No more global 'vmwineon' parameter:
- We expect asterisk to tell us by channel.
- If 'vmwi_ioctl' is not set (it is by default), that we revert
to FSK searching (expensive) and call directly our NEON code
(as before).
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8887 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* The worker member of 'struct xbus' is now an embedded struct xbus_workqueue.
* Replace wake_up() to wake_up_interruptible_all().
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8882 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Change refcount_xpd(): instead of returning a pointer to the atomic
counter, return directly its value (just like refcount_xbus())
* Add a refcount_xbus and refcount_xpd attributes to sysfs (for debugging)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8878 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This changeset should have no functional changes.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8877 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Fix a place where an inner declaration of a local 'i' shadows the
declaration of an outer one. Just rename the inner one to 'j'.
Reported by sparse.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7690 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Commit d43c36 made it necessary to add sched.h to more of the board drivers.
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=d43c36
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7392 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Done in preperation for T1 CAS support, as the PRI module will use RBS
instead.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7244 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The owner field should only tested after the low-level driver
pre-registration method is called.
xpp rev: 7287
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6967 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Adds a struct module 'owner' member to the dahdi_span structure and updates
all the board drivers to set this member before registering the span. This
allows the core of dahdi to maintain the reference counts on the channels
itself.
(closes issue #10601)
Reported by: Matti
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6794 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This adds a compatibility macro for older versions that is a noop for
kernels >= 2.6.30.
(closes issue #14964)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6642 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6408 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix cases where the command_queue overflowed during initialization.
- Also add a 'command_queue_length' parameter to xpp.ko
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
- New 'offhook' attribute in:
/sys/bus/xpds/devices/??:?:?/offhook
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
* USB_FW.hex:
- Fixes cases where firmware loading would fail.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6046 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix cases where the command_queue overflowed during initialization.
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5663 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5132 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Fixes the xpp warnings of #13763 (except some false alarms).
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5131 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Sysfs representation for XPDs:
/sys/bus/xpds/devices/<bus>:<unit>:<subunit>
* Astribanks sysfs directories now include the XPDs as subdirectories:
e.g. /sys/bus/astribanks/devices/xbus-00/00:3:0
* procfs control interface deprecated: conditioned by OLD_PROC
(defaults to off). Control functionality moved to sysfs:
* xbus attributes: cls connector label status timing waitfor_xpds xbus_state
* XPDs can have driver-specific attributes. Common attriubtes:
blink chipregs span
* PRI-specific attributes:
pri_clocking pri_dchan pri_cas pri_alarms pri_layer1 pri_localloop pri_protocol
* The Astribank attribute "xbus_state" is read/write. Reading it shows
the current state of the Astribank. Writing "start" or "stop" allows a
software equivalent of connect or disconnect respectively.
* When an Astribank is ready it sends an "online" event. Whenever its
not ready (e.g. at the time of disconnect) it sends an "offline" event.
Use astribank_hook.sample to handle those.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5097 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4758 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix some cases of double digits.
* Fix some rare cases of a BRI unit providing incorrect directionality.
* Extra debugging code in card_fxs.c to trace future DTMF issues.
* Properly note Zaptel (as opposed to DAHDI) ioctls.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4695 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Also remove a small duplication in dahdi-base.c, as I'm too lazy to
fix in two separate places.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4688 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
(closes issue #11504)
Reported by: tzafrir
Patches:
20080717__issue11504_dahdi_printk_without_priority.diff uploaded by bbryant (license 36)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4685 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4682 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
in dahdi_rbs_sethook() to a much more readable and less error prone format.
In passing, get rid of the dahdi_txsig_t typedef, and fix uses of it
throughout the tree.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4679 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4548 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Convert card_bri as well.
* memset each channel separately.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4517 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
ones (one allocation for each dahdi_chan structure, separate from any private structures used by the driver)
(closes issue #12657)
Reported by: tzafrir
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4513 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
this is always the case for dahdi.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4509 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4457 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4418 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|