diff options
author | Tzafrir Cohen <tzafrir.cohen@xorcom.com> | 2009-03-01 13:56:23 +0000 |
---|---|---|
committer | Tzafrir Cohen <tzafrir.cohen@xorcom.com> | 2009-03-01 13:56:23 +0000 |
commit | 7e6e55bbdcd0224bf07de8dd47e4f7a92e7d097f (patch) | |
tree | 34c04ea112c9587bbad7e0593119c09a53c43466 /drivers/dahdi/xpp/init_card_3_30 | |
parent | ac9297570200f1f21dff01043baabdba90516722 (diff) |
New XPP code: xpp rev 6795:
* Fix cases where the command_queue overflowed during initialization.
- Also add a 'command_queue_length' parameter to xpp.ko
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
- New 'offhook' attribute in:
/sys/bus/xpds/devices/??:?:?/offhook
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
* USB_FW.hex:
- Fixes cases where firmware loading would fail.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6046 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Diffstat (limited to 'drivers/dahdi/xpp/init_card_3_30')
-rwxr-xr-x | drivers/dahdi/xpp/init_card_3_30 | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/dahdi/xpp/init_card_3_30 b/drivers/dahdi/xpp/init_card_3_30 index 3355f7b..9e72089 100755 --- a/drivers/dahdi/xpp/init_card_3_30 +++ b/drivers/dahdi/xpp/init_card_3_30 @@ -398,8 +398,10 @@ sub init_xhfc($) { # in the last slot of PCM frame # V_PCM_DR, C4IO is 16.384MHz(128 time slots) - BRI::gen "$portnum WD 4C 03"; # GPIOGPIO function (not PWM) on GPIO0 and GPIO1 pins - BRI::gen "$portnum WD 4A 03"; # Output enable for GPIO0 and GPIO1 pins + BRI::gen "$portnum WD 4C 07"; # GPIOGPIO function (not PWM) on GPIO0, GPIO1 and GPIO2 pins + BRI::gen "$portnum WD 4A 07"; # Output enable for GPIO0, GPIO1 and GPIO2 pins + BRI::gen "$portnum WD 48 01"; # GPIO output data bits + } my @port_type = ( |