diff options
Diffstat (limited to 'drivers/dahdi/wcte12xp/gpakenum.h')
| -rw-r--r-- | drivers/dahdi/wcte12xp/gpakenum.h | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/drivers/dahdi/wcte12xp/gpakenum.h b/drivers/dahdi/wcte12xp/gpakenum.h deleted file mode 100644 index c2a5175..0000000 --- a/drivers/dahdi/wcte12xp/gpakenum.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Copyright (c) 2005, Adaptive Digital Technologies, Inc. - * - * File Name: gpakenum.h - * - * Description: - * This file contains common enumerations related to G.PAK application - * software. - * - * Version: 1.0 - * - * Revision History: - * 06/15/05 - Initial release. - * - * This program has been released under the terms of the GPL version 2 by - * permission of Adaptive Digital Technologies, Inc. - * - */ - -/* - * See http://www.asterisk.org for more information about - * the Asterisk project. Please do not directly contact - * any of the maintainers of this project for assistance; - * the project provides a web site, mailing lists and IRC - * channels for your use. - * - * This program is free software, distributed under the terms of - * the GNU General Public License Version 2 as published by the - * Free Software Foundation. See the LICENSE file included with - * this program for more details. - */ - -#ifndef _GPAKENUM_H /* prevent multiple inclusion */ -#define _GPAKENUM_H - -/* G.PAK Serial Port Word Size */ -typedef enum -{ - SerWordSize8 = 0, // 8-bit seial word - SerWordSize16 = 1 // 16-bit serial word -} GpakSerWordSize_t; - -/* G.PAK Serial Port FrameSync Polarity */ -typedef enum -{ - FrameSyncActLow = 0, // active low frame sync signal - FrameSyncActHigh = 1 // active high frame sync signal -} GpakSerFrameSyncPol_t; - -/* G.PAK Serial Port Clock Polarity */ -typedef enum -{ - SerClockActLow = 0, // active low serial clock - SerClockActHigh = 1 // active high serial clock -} GpakSerClockPol_t; - -/* G.PAK Serial Port Data Delay */ -typedef enum -{ - DataDelay0 = 0, // no data delay - DataDelay1 = 1, // 1-bit data delay - DataDelay2 = 2 // 2-bit data delay -} GpakSerDataDelay_t; - -/* G.PAK Serial Port Ids. */ -typedef enum -{ - SerialPortNull = 0, // null serial port - SerialPort1 = 1, // first PCM serial stream port (McBSP0) - SerialPort2 = 2, // second PCM serial stream port (McBSP1) - SerialPort3 = 3 // third PCM serial stream port (McBSP2) -} GpakSerialPort_t; - -/* G.PAK serial port Slot Configuration selection codes. */ -typedef enum -{ - SlotCfgNone = 0, // no time slots used - SlotCfg2Groups = 2, // 2 groups of 16 time slots used, 32 Channels system - SlotCfg8Groups = 8 // 8-partition mode for 128-channel system -} GpakSlotCfg_t; - -/* G.PAK serial port Companding Mode codes. */ -typedef enum -{ - cmpPCMU=0, // u-Law - cmpPCMA=1, // A-Law - cmpNone=2 // none -} GpakCompandModes; - -/* G.PAK Active/Inactive selection codes. */ -typedef enum -{ - Disabled=0, // Inactive - Enabled=1 // Active -} GpakActivation; - -/* G.PAK Channel Type codes. */ -typedef enum -{ - inactive=0, // channel inactive - tdmToTdm=1 // tdmToTdm -} GpakChanType; - -/* G.PAK Algorithm control commands */ -typedef enum -{ - EnableEcanA = 0, // Enable A side echo canceller - BypassEcanA = 1, // Bypass A side echo canceller - ResetEcanA = 2, // Reset A side echo canceller - EnableEcanB = 3, // Enable B side echo canceller - BypassEcanB = 4, // Bypass B side echo canceller - ResetEcanB = 5, // Reset B side echo canceller - - EnableMuLawSwCompanding = 6,// Enable Mu-law Software companding - EnableALawSwCompanding = 7, // Enable Mu-law Software companding - BypassSwCompanding = 8, // Bypass Software companding - EnableDTMFMuteA = 9, // Mute A side Dtmf digit after tone detected - DisableDTMFMuteA = 10, // Do not mute A side Dtmf digit once tone detected - EnableDTMFMuteB = 11, // Mute B side Dtmf digit after tone detected - DisableDTMFMuteB = 12, // Do not mute B side Dtmf digit once tone detected - EnableFaxCngDetectA = 13, // Enable A side Fax CNG detector, channel must be configed already - DisableFaxCngDetectA = 14, // Disable A side Fax CNG detector, channel must be configed already - EnableFaxCngDetectB = 15, // Enable B side Fax CNG detector, channel must be configed already - DisableFaxCngDetectB = 16 // Disable B side Fax CNG detector, channel must be configed already -} GpakAlgCtrl_t; - -/* G.PAK Tone types. */ -typedef enum -{ - Null_tone = 0, // no tone detection - DTMF_tone = 1 // DTMF tone -} GpakToneTypes; - -/* G.PAK direction. */ -typedef enum -{ - TDMAToB = 0, // A to B - TDMBToA = 1 // B to A -} GpakTdmDirection; - - -typedef enum -{ - rate1ms=0, - rate2ms=1, - rate10ms=2 -} GpakRate_t; - -/* G.PAK Asynchronous Event Codes */ -typedef enum -{ - EventToneDetect = 0, // Tone detection event - EventDSPDebug = 7 // DSP debug data event -} GpakAsyncEventCode_t; - -/* G.PAK MF Tone Code Indices */ -typedef enum -{ - DtmfDigit1 = 0, // DTMF Digit 1 - DtmfDigit2 = 1, // DTMF Digit 2 - DtmfDigit3 = 2, // DTMF Digit 3 - DtmfDigitA = 3, // DTMF Digit A - DtmfDigit4 = 4, // DTMF Digit 4 - DtmfDigit5 = 5, // DTMF Digit 5 - DtmfDigit6 = 6, // DTMF Digit 6 - DtmfDigitB = 7, // DTMF Digit B - DtmfDigit7 = 8, // DTMF Digit 7 - DtmfDigit8 = 9, // DTMF Digit 8 - DtmfDigit9 = 10, // DTMF Digit 9 - DtmfDigitC = 11, // DTMF Digit C - DtmfDigitSt = 12, // DTMF Digit * - DtmfDigit0 = 13, // DTMF Digit 0 - DtmfDigitPnd = 14, // DTMF Digit # - DtmfDigitD = 15, // DTMF Digit D - - FaxCngDigit = 90, // Fax Calling Tone (1100 Hz) - - EndofMFDigit = 100, // End of MF digit - EndofCngDigit = 101 // End of Cng Digit -} GpakToneCodes_t; - -/* GPIO control code*/ -typedef enum -{ - GPIO_READ = 0, - GPIO_WRITE = 1, - GPIO_DIR = 2 -} GpakGPIOCotrol_t; - -#endif // end multiple inclusion |