summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-30wctc4xxp: Allow G723 SID frames to pass to the hardware decoder.Shaun Ruffell
The driver has, until now, dropped G723 SID frames even though the firmware on the TC400/TCE400 can handle them. Now let them on through. Reported-and-Tested-by: Angel Carhuas <acarhuas@colinanet.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10218 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10219 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-09-27wctdm24xxp: Set dahdi_span.devicetype string in one place.Shaun Ruffell
Currently the devicetype string was set both when the device was first allocated and updated when an echocanceler was detected. For simplicity, combine both these steps into a single function. This change also replaces an improper use of strncat with strlcat. Additionally, on the 2.5 branch, this change actually makes r10206 "wctdm24xxp, wcte12xp: Advertise VPMOCT032 presence in dahdi_span.devicetype", work the way it was originally intended. That change was only functioning properly previously on trunk. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10210 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10211 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-09-25xpp: fxs: bugfix for 2fxs+6fxo cardsTzafrir Cohen
* Bug sympthoms: wrong FSK VMWI sent few seconds after offhook. That was caused because the driver kept polling the (physically unconnected) digital inputs. [note: a workaround for drivers without this patch is to zero the 'xpd_fxs.poll_digital_inputs' parameter.] * Also, the digital_inputs/digital_output masks were calculate using a different condition. * Now we determine number of channels, digital inputs and digital outputs in a single place and use this info later to calculate the correct masks. * We poll only if there are digital_inputs * We added a sanity check in process_digital_inputs, so we get a notice if it's called on an xpd without digital inputs (e.g: hypothetic firmware bug). Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10208 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-09-23dahdi: Check for master in DAHDI_STARTUP / resolves MeetMe regression.Shaun Ruffell
There were a couple of reports that MeetMe conferences were not working in 2.5.0.1 and that downgrading to 2.4.1.2 resolved the issue. This could occur if there were no analog spans in a system, and all the digital spans were out of alarm before DAHDI_STARTUP ioctl was called by dahdi_cfg. If the spans were *not* out of alarm, they would be marked master when the span changes it's alarm state. This would result in a condition where no spans were marked as the "master" and so the core timer was handling conferencing. The core timer runs by default at 4ms and most board drivers run at 1ms intervals, but a channel currently only buffers up 2ms of data when conferenced. Therefore, 2ms of audio from a board was continuously dropped from the conference every 4ms by default. This fixes a regression first introduced in 2.5.0 which was specifically added in revision r9611 "dahdi: Do not locate new master in interrupt context." Internal-reference-ID: DAHDI-894 Signed-off-by: Shaun Ruffell <sruffell@digium.com> Tested-by: Dennis Martinez <dmartinez@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10205 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10207 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-09-23wctdm24xxp, wcte12xp: Advertise VPMOCT032 presence in dahdi_span.devicetype.Shaun Ruffell
A "(VPMADT032)" string is appended to the devicetype (as shown by dahdi_scan) for the span if one is installed. Now append '(VPMOCT032)' if one is installed as well. Also, for the wcte12xp driver append the VPM name to the device type after initially probing as opposed to only after the span is configured. (Related to issue DAHDI-890) Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10203 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10206 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-09-13dahdi: Decrease the initial coretimer delay to 4ms from 1 second.Shaun Ruffell
DAHDI currently waits a second before checking if a board driver is calling dahdi_receive and switching to internal timing. Some versions of Asterisk (I was looking at 1.4.42 when writing this) only wait 300ms for a timer to expire when first starting and verifying that DAHDI is properly configured. This can result in a "ERROR[27673] asterisk.c: Asterisk has detected a problem with your DAHDI configuration and will shutdown for your protection. You have options:" message if asterisk is started soon after loading DAHDI. This change sets the inital polling interval to the same as that used during normal coretimer operation, 4ms. The interval will still be slowed to 1 second if a board driver starts calling dahdi_receive(). DAHDI-892. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10200 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10201 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-09-05xpp: firmware to detect the new 2+6 moduleTzafrir Cohen
New firmwares to handle the new 2FXS/6FXO module. FPGA_1161.hex, PIC_TYPE_1.hex, PIC_TYPE_2.hex of internal rev. 9732 Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10180 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-30wcte12xp, wctdm24xxp: Update VPMOCT032 firmware to 1.11.0.Shaun Ruffell
Firmware version 1.11.0 resolves an issue where the driver fails to detect certain VPMOCT032 modules after a cold boot. Signed-off-by: Doug Bailey <dbailey@digium.com> Acked-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10172 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10173 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-28xpp: FXS: new 2+6 module has no digital I/O portsTzafrir Cohen
This module is recognized via subtype==4 Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10157 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-19wctdm24xxp: Set 'fastoffhook' counter to 8ms and turn off calibration delay.Shaun Ruffell
r10006 "wctdm24xxp: Add 'fastpick' module parameter." copied the fast-off hook module parameter from the wctdm.c driver, but the setting in that driver does not match the data sheet. The previous commit did not actually change any of the significant bits in that register. Also, that commit changed the timer, but did not disable the callibration delay which is necessary for Type-II callerid. The fastpickup option in the wctdm24xxp driver should now match the fastpickup option in the wctdm driver. DAHDI-224. Reported-By: Kinnith Wallace <kwallace@digium.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10148 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10150 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-19wctdm: Set 'fastpickup' counter to 8msShaun Ruffell
This fixes what looks like a typo in r1055 [1]. [1] http://svnview.digium.com/svn/dahdi?view=revision&revision=1055 Reported-by: Kinnith Wallace <kwallace@digium.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10147 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10149 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-18wctdm24xxp: Use our own free list for IRQ commands.Shaun Ruffell
Really only *necessary* when SLAB debugging is enabled, but in that case, can reduce the chance of latency bumps when first loading the driver. Otherwise the constant slab poisoning / checking in interrupt context from the kmalloc / kfrees is too much. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10144 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10146 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-18wct4xxp: Bug in timing cable with different span density cardsShaun Ruffell
The logic loops through the static cards[] array to determine timing, but the subloop was based off the current card's numspans member. This could cause a null dereference in the case where two cards of different span densities were connected via timing cables. Reported-by: Doug Bailey <dbailey@digium.com> Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10140 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10145 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-15wctc4xxp: Fix lock imbalance in wctc4xxp_watchdog.Shaun Ruffell
r10082 "wctc4xxp: Cleanup in-flight commands when halting due to hardware error." introduced a lock imblance on the error path where the cmd_list_lock would be unlocked twice when the board is halted due to a hardware error. Thanks sparse. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10138 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10139 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-12wcte12xp, wctdm24xxp: Force local interrupts off in the interrupt handler.Shaun Ruffell
r10066 "wctdm24xxp, wcte12xp: Run the ISR with interrupts disabled." requested that the interrupt handler be run in "fast" mode (disabled) but this isn't necessarily guaranteed. This patch makes the interrupt handler itself disable all the interrupts. Linux commit 470c66239ef0336429b35345f3f615d47341e13b [1] contains a comment about why this is necessary. [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=470c66239ef03364 (closes issue DAHLIN-248) Reported-and-Tested-by: Vladimir Mikhelson <vlad@mikhelson.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10118 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10119 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-11dahdi: Define HAVE_NET_DEVICE_OPS on kernels > 2.6.29Shaun Ruffell
HAVE_NET_DEVICE_OPS was defined in the mainline kernel in commit 47fd5b83 which was first released in 2.6.29. Any kernels after that will have those fields defined. Mainline commit e2270ea62ae4d7a removed the feature test macros, so the easiest thing to do is define HAVE_NET_DEVICE_OPS ourselves on the kernels since it was committed. This change is needed to compile against the 3.1 kernel. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10109 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10117 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-11dahdi_dynamic: Call dahdi_receive in rx packet handler.Shaun Ruffell
Currently dahdi_receive is called on all channels in the context of the master dynamic span. If one span (not the master) receive two packets before the master span received a packet, the older packet on the dynamic span would end up lost because the "readchunk" for the channels would be overwritten by the new packet. DAHLIN-245 Signed-off-by: Wagner Gegler <wagner@aligera.com.br> (License #6268) Changed dahdi_ec_chunk to dahdi_ec_span. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10110 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10116 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-11wctc4xxp, wcte12xp, wctdm24xxp: Remove check for HAVE_NETDEV_PRIVShaun Ruffell
DAHDI currently supports kernels >= 2.6.9. netdev_priv() has been in the mainline kernel since versions 2.6.6 so it's available in all the supported kernels. This change is needed to compile against the 3.1 kernel. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10096 git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10115 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-09FPGA_1161 rev 9605: EC related bug fixesTzafrir Cohen
Astribank II FPGA firmware rev 9605. Includes two bug fixes: * Error in checking EC licenses when the license was for exactly 64 or 128 channels. * Proper handling of a slave FXO Astribank (in line with the quirks handling from r10019). Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10100 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-08-09A stable branch for DAHDI-linux 2.5Tzafrir Cohen
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.5@10098 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-26wctc4xxp: Cleanup in-flight commands when halting due to hardware error.Shaun Ruffell
On one system I was seeing the board reset in the middle of a transaction. Any commands that were on the response list when this would happen would never be completed and the process would then be stuck in an uninterruptible sleep. This change also prevents the driver from sleeping in timer context, which would result in a kernel panic. This change at least lets an error message propogate back to the user. DAHDI-880 Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10082 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-22wcb4xxp: Prevent null pointer dereference on spanconfigRuss Meyerriecks
In the rare case where spanconfig is called while there is pending data on the hdlc channel, the hdlc_getbuf interrupt could try to read from the hdlc buffer before the channel was fully setup. This could potentially result in a null pointer dereference. This condition has existed since the creation of the wcb4xxp driver. Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10079 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-21dahdi: Drivers that do not support hwec should not report hwec is available.Shaun Ruffell
When attaching software echocans to a channel, if there is a hardware echocan available always give preference to them. Revision 9995 "dahdi: Always attach hwec to a channel if available" had an error where if a driver did not even support an option of hardware echocan, dahdi-base would take that to mean there always was a hardware echocan available on the channel. DAHLIN-246 Reported-by: Michael L. Young Signed-off-by: Shaun Ruffell <sruffell@digium.com> Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10070 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-21wctdm24xxp, wcte12xp: Run the ISR with interrupts disabled.Shaun Ruffell
Revision 9886, "wcte12xp: Use the in-hardirq versions of dahdi_receive/dahdi_transmit", changed the call into dahdi_receive and dahdi_transmit to use versions that assume local interrupts are already disabled. Not all versions of the kernel run interrupt service routines with all interrupts disabled and therefore it was possible to lock up a CPU with a recursive grab of the chan_lock. When LOCKDEP was enabled (on debug kernels) interrupt handlers were run atomically so this problem would only occur on pre 2.6.35 kernels that did not have lockdep enabled. Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10066 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20wcte12xp: Fix bug when not recognizing loopup codesRuss Meyerriecks
The wcte12xp wasn't recognizing loopup/loopdown signals. The debounce was so long that it was preventing the loopup/loopdown signals from being registered properly. Removed the debounce entirely as it was unnecessary to the operation. Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Acked-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10064 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20wct4xxp: Fixed a bug where it sent loopdown signals foreverRuss Meyerriecks
The wct4xxp driver was resetting it's maint state to NONE prematurely. Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Acked-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10063 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20wct4xxp: Fix compilation when VPM_SUPPORT is not defined.Shaun Ruffell
Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10061 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20oct612x: Increase the size of some of the instance variables.Shaun Ruffell
Revision 9750 "wct4xxp: Reduce the memory footprint of the hardware echocanceler" reduced the number of bits used to store some structure members. Some of the new field lengths were unable to store all the possible values the API as used assigned to the fields, resulting in channels never entering power down mode when they were disabled like they were previously. The change for byEchoOperationMode was found in testing the operation of the VPMOCT032 which currently uses the same code. The others were done via a review of the API doc. This change represents negligable risk and contains no logic changes. It only increases the memory footprint of the API instance in the kernel. Signed-off-by: Doug Bailey <dbailey@digium.com> Acked-by: Shaun Ruffell <sruffell@digium.com> Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10060 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20README: KVERS, KSRC in live.confTzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10058 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20live_dahdi: symlink_astTzafrir Cohen
live_dahdi: Add a new command: symlink_ast, to make the system's /etc/asterisk/dahdi-channels.conf a symlink to the one generated by 'reload' / 'genconf'. If the system dahdi-channels.conf is a generated one and has not edited, there's no real harm with running this. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10057 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20get registration_mutex at free_pseudoTzafrir Cohen
Make sure that the call to dahdi_chan_unreg() in free_pseudo() is protected by the registration_mutex, like the other calls to that function. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Acked-By: Oron Peled <oron.peled@xorcom.com> Acked-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10056 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20xpp: increase command queue lenge to 1000Tzafrir Cohen
Required by CAS in latest (2.5) DAHDI versions. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10055 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20xpp: make quirk bit flags unsignedTzafrir Cohen
This avoids a nag about a meaningless single-bit signed int. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10054 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20xpp: PRI_timing_priority can be static.Tzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10053 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20xpp: rate limit queue overflow messagesTzafrir Cohen
If the CPU becomes overly busy, merely printing the "Overflow in the recieve_queue" messages becomes CPU-intensive on its own right. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10052 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20live_dahdi: xpp_fxloader: use live xpp.confTzafrir Cohen
xpp_fxloader also reads /etc/dahdi/xpp.conf in one specific case. Make it use the live copy. git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10051 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-20live_dahdi: no need to create asterisk at genconfTzafrir Cohen
/etc/asterisk already gets generated at config. No need to re-create it at genconf time. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10050 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-18wcte12xp: Close a potential race on driver unload.Shaun Ruffell
The shutdown logic requires that all CPUs see that the INITIALIZED bit has been cleared. Otherwise it may be possible for the workqueue to run after the hardware resources have been released. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10047 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-12xpp: install Octasic frmware if it's thereTzafrir Cohen
If the OCT6104E-256D.ima Octasic firmware was downloaded to the build directory, install it over with the rest of the firmware files. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10038 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-12xpp: Demote notices for HWEC create/free to debugTzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10037 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-12dahdi: Add dynamic dahdi parameter hwec_overrides_swec.Tzafrir Cohen
If set to true (default) a HWEC, if available on the channel, takes priority over any software echocan configured in /etc/dahdi/system.conf. This has historically been the default behavior in all released versions of DAHDI that support module echocans. Otherwise, hwec_overrides_swec is set to false, HWEC is chosen only via the "echocanceller=hwec" directive. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Signed-off-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Acked-By: Oron Peled <oron.peled@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10036 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-07live_dahdi: create asterisk in the live treeTzafrir Cohen
Make sure you have etc/asterisk in the live tree before generating configuration. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10028 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-05oct612x: Eliminate some compiler warnings.Shaun Ruffell
Eliminate "large integer implicitly truncated to unsigned type" warnings from r10010. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Acked-by: Doug Bailey <dbailey@digium.com> Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10024 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-04xpp: xpd_fxs: ring_trapez parameterTzafrir Cohen
This adds module parameter 'ring_trapez'. When set, the wave form of the ring tone is set to be a trapezoid, rather than sine. Thus making the ring stronger. This is a boolean parameter of the module xpd_fxs. Takes effect at the beginning of the next ring. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10022 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-04A number of cases of testing for unsigned int < 0Tzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10021 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-04xpp: Eliminate "set but unused" compiler warnings.Tzafrir Cohen
gcc 4.6 complains about variables that are assigned values but then never used. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10020 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-04xpp: add FXO HWEC quirks handlingTzafrir Cohen
In some cases the hardware echo canceller cannot be used. Mostly related to an FXO module. * FXO module if the first module is BRI or PRI * FXS module if the Astribank has another FXO, no PRI/BRI, and is a sync slave. Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10019 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-01wcb4xxp: Return NULL if there is not a hardware EC on installed.Shaun Ruffell
r9943 enabled the presence of hardware EC to be probed on a card. That change did not account for wcb4xxp based cards that did not have a hardware echocan on board. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10017 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-07-01wct4xxp: Add module parameter to ignore rotary switch settings.Shaun Ruffell
The dual and quad span cards have a rotary switch onboard which controls the order that cards serviced by this driver are registered with the core of DAHDI. This commit adds a module parameter 'ignore_rotary' which, when set to 1, causes the driver to ignore the position of the rotary switch and only consider the physical slot when registering with DAHDI. Ignoring the rotary switch settings also permits the PCI device to be bound and unbound from the driver at runtime since registration with DAHDI no longer only happens when the module is first initialized. By default, the rotary switch will still be used to determine registration order. This commit does not change the default behavior. Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10016 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-06-30Also loca xpd_echo in live_dahdi, if availableTzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10014 a0bf4364-ded3-4de4-8d8a-66a801d63aff
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-01 06:49:49 +0000