summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-03wct4xxp: Reduce time spent waiting for auth done bit on TE820.Shaun Ruffell
It is not necessary to wait a full second for the donebit. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10395 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2012-01-02xpp: BRI: batch D-Channel packets to fix frag.Tzafrir Cohen
* We need to split the BRI D-Channel (HDLC) frames to smaller packets, limitation of the FPGA. * This changes batches BRI D-channel packets of the same HDLC frame to a single XPP frame. * Avoids an accidental fragmantion in case we were delayed for a few ms-s. * Also improves efficiency. Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10390 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2012-01-02xpp: BRI: split multibyte functionalityTzafrir Cohen
* The zero lenth case (Magic request) was split into send_magic_request() function. It was not possible to move it into card_bri.c, because it is called directly from the general interface we provide for register read/write via sysfs/proc. * The normal case (send_multibyte_request) was moved from card_global.c into card_bri.c * This sets the stage to enable bundling of multibyte packets into frames (like we do for PCM). Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10389 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2012-01-02xpp: BRI: remove trivial BRISTUFF wrappersTzafrir Cohen
Now that legacy BRISTUFF code is gone, some wrapper functions became trivial. Removed these wrappers and inlined their contents. Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10388 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2012-01-02xpp: BRI: remove legacy BRISTUFF codeTzafrir Cohen
Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10387 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-21xpp: Allow up to 128 Astribanks on a systemTzafrir Cohen
This is also a work around the bug fixed in the previous commit. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10384 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-21xpp: bad module_put() when too many AstribanksTzafrir Cohen
module_put() that was added while developing the sysfs code. The real module_get()/module_put() pair were already removed at the time of developing code for this branch. It was only triggered when using a system with more than 32 (MAX_BUSES) Astribanks. Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10383 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-14DAHDI-linux: Fix "surprise removal" problemsTzafrir Cohen
* Added a nodev_*() file_operations that handle system calls from user-space after surprise device removal. Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Acked-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10381 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-14wct4xxp: Fail startup if not generating interrupts.Shaun Ruffell
I've seen some platforms that do not properly route the interrupt from the card to the host CPU. In these cases the card potentially could appear to be greened up even though no data is flowing over the spans. This change allows dahdi_cfg to return an error when this occurs, and also ensures that all the spans are in RED alarm. For example, dahdi_cfg output when the card is not generating interrupts: # dahdi_cfg DAHDI startup failed: Input/output error And the kernel log will contain a string like: wct4xxp 0000:02:08.0: Interrupts not detected. Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10380 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-14dahdi: Return dahdi_span_ops.startup callback errors to userspace.Shaun Ruffell
Allows dahdi_cfg to return an error code if a board driver fails it's startup call for any reason. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10379 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-12wctdm24xxp: Do not call voicebus_release() before wctdm_back_out_gracefully()Shaun Ruffell
voicebus_release is already called as part of the wctdm_back_out_gracefully() call. If an Hx8 card fails to initialize, this will eliminate warnings from the kernel such as: WARNING: at kernel/irq/manage.c:904 __free_irq+0x94/0x173() Trying to free already-free IRQ 18 Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10377 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-07xpp: BRI: fix timing priority calculationTzafrir Cohen
Use similar caculation as in the PRI module: * Save timing_priority from spanconfig and elect syncer when spanconfig is called. * Create custom timing_priority() function that returns the value or error if span is disconnected. Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by: : Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10373 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-07xpp: FXS: mwi and search_fsk fixesTzafrir Cohen
* We must not block PCM during from 'search_fsk_pattern' channels. * We must vmwi_search() not only on FXS_LINE_POL_ACTIVE, but also during 'neon_blinking' -- so we notice the message to turn it off. * Also added 'search_fsk_pattern' and neon_blinking to /proc/.../fxs_info Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by: : Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10372 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-02wct4xxp: Revise vpm struct due to product name changesRuss Meyerriecks
Renamed most of the "vpm450m" references to just "vpm". Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Acked-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10365 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-02wct4xxp: Handle incorrect vpm module/card pairingsRuss Meyerriecks
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Acked-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10364 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-02dahdi: #include <linux/module.h> in dahdi/kernel.h and GpakCust.hShaun Ruffell
Commit de47725, first released in 3.2-rc1 removed module.h from some kernel headers. Include it explicitly now. Resolves compilation errors like: error: implicit declaration of function 'try_module_get' error: 'THIS_MODULE' undeclared (first use in this function) error: implicit declaration of function 'module_put' Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10361 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-12-02wctc4xxp: Replace 'ndo_set_multicast_list' with 'set_rx_mode'Shaun Ruffell
The ndo_set_multicast_list callback was removed in b81693d9, which was first released in Linux Kernel 3.2-rc1 Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10360 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-29xpp: PRI: restore pri_protocol to R/W:Tzafrir Cohen
Restores the pri_protocol attribute of the XPD node in SysFS to be writable. Fixes a minor regression from the pinned-spans fix, similar to r10334. * This attribute was made R/O in digium r10280 as part of the pinned-spans changes: - The E1/T1 settings were changed via new set_spantype() method which was called from dahdi when the 'spantype' dahdi attribute was written to. - This fails our init_card_4_* trying to write E1/T1 into our private attribute. * Restored our old code (with minor modifications) so we can set E1/T1 the old way (writing to our 'pri_protocol' attribute) as well as the new way (when it will be used eventually). Signed-off-by: Oron Peled <oron.peled@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10347 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-29xpp: pri: fix RS1 init in E1 CAS modeTzafrir Cohen
Force some reserved bits to really be 1 in E1 mode (otherwise terrorists will win). (Closes issue DAHLIN-264) Signed-off-by: Oron Peled <oron.peled@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10346 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-29xpp: fxs: demote SETPOLARITY message to DBG()Tzafrir Cohen
Signed-off-by: Oron Peled <oron.peled@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10345 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-16xpp: increase command queue length to 1500Tzafrir Cohen
A length of 1000 commands is not enough is some cases with CAS. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10341 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-13xpp: USB_FW rev 10085: fix regression from r10013Tzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10339 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-13xpp: PIC_TYPE_1 rev 9841: followup to r10013Tzafrir Cohen
An extra fix that was accidentally not included in r10013. Minor bug fixes. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10337 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-10xpp: silence some bad ioctl() reportingTzafrir Cohen
Ignore some FXS-specific ioctl-s in xpd_pri. Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10335 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-10xpp: restore backward compat dahdi_registrationTzafrir Cohen
This restores a somewhat limited functionality of the "span" write interface in the SysFS node of the span, broken by the pinned-spans code. * PROBLEM: dahdi-linux pinned-spans should work with existing dahdi-tools specifically the dahdi_registration tool. * As a result, we should still be able to control dahdi registration order. However, registration is now in complete devices and not spans * Restored dahdi_autoreg=[0/1] xpp module parameter: - It now refers to complete astribanks and not individual spans * The xpp module sysfs "span" attribute: - Implemented write method (for dahdi_registration tool) - The first write of [1/0] to this attribute, registers/unregisters the complete astribank - Further writes are ignored (with DBG messages) * Also, implemented new xbus_is_registered() function * Once the new dahdi-tools are merged, we should turn deprecation messages from DBG() to NOTICE() Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10334 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-07wctdm24xxp: Wait for background threads to complete on failed load.Shaun Ruffell
Some of the VPM loading / probing threads use global system workqueues. They might now be running when we abort early so we should wait for them to complete their runs before freeing memory that may be in use. Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10332 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-07dahdi: Unregister dahdi_device from sysfs if we fail to auto assign spans.Shaun Ruffell
Otherwise, if the _dahdi_assign_span call fails, the dahdi_device will never be removed from the dahdi_devices virtual bus and the board drivers will not be reloadable. Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10331 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-07dahdi: Fix typo in previous commit which forced some spans to always fail ↵Shaun Ruffell
assignment. I misssed a small typo in r10328 "Extra debugging aids and messages" that would force any span that supports a hardware preechocan to always fail assignment with -EFAULT. Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10330 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-07Extra debugging aids and messagesTzafrir Cohen
* Added dahdi_dev_dbg() macro to print when we don't (yet) have a span number. * Added a new debug category: DAHDI_DBG_ASSIGN * Made sure error return code paths prints helpfull messages * Promote error messages from INFO to NOTICE * Change some errno values from EINVAL to EFAULT (internal errors not caused by user input) Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by Tzafrir Cohen <tzafrir.cohen@xorcom.com> Acked-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10328 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-07bugfix: off-by-one in span assignmentTzafrir Cohen
The test in _check_spanno_and_basechan() was off by one (used '<' instead of '<=') Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Acked-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10327 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-07xpp: USB firmware r9964: minor bugfixesTzafrir Cohen
USB_FW rev 9964: includes a few stability bugfixes. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10323 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-02wct4xxp: minor: Removed unnecessary instrumentationRuss Meyerriecks
Removed a couple prints of instrumentation that was cluttering up the log output. Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Acked-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10310 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-02dahdi: First span registered becomes master by default.Shaun Ruffell
r10205 "dahdi: Check for master in DAHDI_STARTUP / resolves MeetMe regression." did not handle the case for the wcb4xxp driver since it would set DAHDI_FLAG_RUNNING as part of the probe. Therefore, the DAHDI_STARTUP ioctl was never processed for it, creating a situation where audio is missing on channels that are conferenced with channels on the BRI spans. Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10304 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-02dahdi: Define POLLRDHUP on kernels < 2.6.17Shaun Ruffell
Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10303 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-02xpp: bugfix: clear NOTOPEN span alarm on assignTzafrir Cohen
The NOTOPEN span alarm flag is set at span unassignment time. * It needs to be cleared when the span is reassigned. * That is: only if the span is actually connected. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10302 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-02xpp: bugfix -- manage xpd refcount for EC moduleTzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10301 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-02xpp: Adaptations for E-Main-3Tzafrir Cohen
* An xbus transport now have a "model_string" member * The xpp_usb driver fills this with "usb:<idVendor>/<idProduct>/<bcdDevice>" * It is passed via environment to the "init_card_<type>_<protocol>" scripts * The FXS script uses this to condition two registers according to the power supply model. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10300 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-02xpp: remove leftovers of old XPD_STATE methodTzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10299 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-01wctdm24xxp, wcte12xp: Allow VPMADT032 commands more time to complete.Shaun Ruffell
Since "wctdm24xxp: Probe for and configure modules in parallel." the check for the VPMADT032 module was moved closer to after when the interface was initialized. The 200ms timeout did not provide enough time for the system to settle out after initial start. The result was that sometimes after a cold boot the driver would fail to detect any VPMADT032 modules. This fixes a race condition that is not in any released branches. Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10296 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-01wctdm24xxp, wcte12xp: Update VPMOCT032 firmware to 1.12.0.Shaun Ruffell
- Cleaned up the OCT6114 interface . - Relaxed the timeout waiting for OCT6114 bus cycle completion to 100 mS and added a 2 mS delay time from OCT6114 reset to initialization. This change only addresses issues that were created in the lab and not in the field. Signed-off-by: Doug Bailey <dbailey@digium.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10295 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-01wct4xxp: Expose serial number in dahdi_device and kernel log.Shaun Ruffell
This will allow the serial number to be exposed in sysfs and also allow span assignment rules to use the serial number. Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10292 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-01wct4xxp: Add field upgradable firmware support for TE820.Shaun Ruffell
This commit adds field upgradeable support for the TE820 firmware. Firmware can now be silently upgraded as part of updating drivers like most of the existing DAHDI firmware. Previous versions of dual and quad span cards did not support upgrading firmware in the field. Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Fixed up some checkpatch issues: Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10291 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-11-01wct4xxp: Add support for TE820 and VPMOCT256.Shaun Ruffell
TE820 is an 8-span PCI-express digital interface card. VPMOCT256 is a hardware echo canceler that is able to provide echo cancelation on all 8-spans. From: Matthew Fredrickson <creslin@digium.com> Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10290 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-10-27README: Minor additions regarding pinned-spansTzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10289 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-10-27README: initial update for span assignmentsTzafrir Cohen
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10288 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-10-26xpp: cleanup some printk()'sTzafrir Cohen
* Also demote them to DBG() Signed-off-by: Oron Peled <oron.peled@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10287 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-10-26added 'basechan' and 'channels' attributes to spansTzafrir Cohen
* So we can: - Generate 'pinned-spans.conf' from existing state - Run dahdi_cfg from udev (on specific span + its channels) Signed-off-by: Oron Peled <oron.peled@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10286 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-10-26dahdi: Give userspace a chance to respond to surprise removal.Tzafrir Cohen
* We try very hard to help asterisk understand that we unassign spans. * Implement disable_span(): - Set span + channels to DAHDI_ALARM_NOTOPEN - qevent DAHDI_EVENT_REMOVED * Use disable_span(): - in dahdi_unassign_span() and dahdi_unregister_device() - with long msleep() so asterisk has a chance to get the message - Out of the registration_mutex so we actually context switch. * Also return more POLLERR variants (POLLRDHUP is not portable, should be tested). * Also improve printk(), fix rate_limit increment (was missing) Signed-off-by: Oron Peled <oron.peled@xorcom.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10285 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-10-26xpp: Remove dahdi_autoreg parameter:Tzafrir Cohen
* With pinned-spans all spans are registered to dahdi with the device (and assigned later) * So this parameter cannot function anymore * Also remove the (now) empty xpd_post_init() function. Signed-off-by: Oron Peled <oron.peled@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10284 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2011-10-26xpp: more informative span description:Tzafrir Cohen
* Contains the hardware_id and the local span number Signed-off-by: Oron Peled <oron.peled@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10283 a0bf4364-ded3-4de4-8d8a-66a801d63aff
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 18:34:10 +0000