Age | Commit message (Collapse) | Author |
|
live_dahdi: Add a new command: symlink_ast, to make the system's
/etc/asterisk/dahdi-channels.conf a symlink to the one generated by
'reload' / 'genconf'.
If the system dahdi-channels.conf is a generated one and has not edited,
there's no real harm with running this.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10057 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
xpp_fxloader also reads /etc/dahdi/xpp.conf in one specific case. Make
it use the live copy.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10051 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
/etc/asterisk already gets generated at config. No need to re-create it
at genconf time.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10050 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Make sure you have etc/asterisk in the live tree before generating
configuration.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10028 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10014 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9532 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Link live/usr/share/dahdi/xpp.conf from live/etc/dahdi/xpp.conf in
'config'. This makes the 'live' xpp.conf used rather than the global
xpp.conf .
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9508 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Change the destination of rsync to /tmp/dahdi
* Add variable LIVE_DAHDI_RSYNC_DIR to allow overriding this.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9480 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Only check that TOOLD_DIR is valid when it is actually needed (configure,
install, config). This allows not checking for it with *load on a
rsync-ed copy.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9479 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
If we fail to shutdown the dynamic spans, we may get a panic on the next
load.
This attempts to guess when we need to unload spans at unload.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9163 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Adds support for configuring dynamic spans through live_dahdi. To enable, set
in live/live.conf:
DYNAMIC_LOC="yes"
It will generate an extra live/etc/dahdi/dynamic.conf (if one does not exist)
and use it to configure extra dynamic spans in the system.
Note that ATM this will make the system hang pretty easily at 'load' time.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9162 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Copy sruffel's fix to the init.d script from -tools.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8818 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Adds commands 'genconf' (for basically: dahdi_genconf; dahdi_cfg) and
'asterisk' (start asterisk) so doing those should not require a full
restart.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8814 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Modprobe firmware_class for modules that may need it (and that we
insmod later)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8751 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Run programs from live tree rather than tools dir (not copied)
* Calculate MODULES dir after reading config file (you'll still need to
override it from the command line for building, but not for reload)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8347 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7867 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7179 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7172 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* wcb4xxp and wcte12xp should also be loaded from a subdirectory with
their name.
* wctdm24xxp and wcte12xp depend on the voicebus driver.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6971 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* More varibles to set through the environment
* Different way to list drivers
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6487 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5711 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Script runs with -e. But we should not fail if either:
- Asterisk was not running
- The module dahdi was not loaded.
* The configure script of dahdi-tools should get absolute path to
dahdi-linux.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5672 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Also acknowledge an warning I'm not sure how to fix for now.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5646 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5535 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5460 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5459 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|