Age | Commit message (Collapse) | Author |
|
Merged revisions 7244-7245,7266,7276,7457 via svnmerge from
http://svn.digium.com/svn/dahdi/linux/trunk
........
r7244 | tzafrir | 2009-09-29 18:23:13 +0200 (Tue, 29 Sep 2009) | 5 lines
xpp: make card_hooksig an optional card method.
Done in preperation for T1 CAS support, as the PRI module will use RBS
instead.
........
r7245 | tzafrir | 2009-09-29 18:45:15 +0200 (Tue, 29 Sep 2009) | 2 lines
xpp: refactor pcm mask handling.
........
r7266 | tzafrir | 2009-09-30 00:43:05 +0200 (Wed, 30 Sep 2009) | 2 lines
xpp: T1 CAS support
........
r7276 | tzafrir | 2009-09-30 15:49:48 +0200 (Wed, 30 Sep 2009) | 2 lines
xpp: PRI PIC firmware: T1-CAS fixes
........
r7457 | tzafrir | 2009-11-03 22:24:13 +0200 (Tue, 03 Nov 2009) | 4 lines
xpp: More E1/T1 CAS fixes. Mostly connect/disconnect
xpp revs: mostly 7458, 7466
........
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.2@7485 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Finishing the work of r6642. Complitly shut issue #14964.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6659 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6640 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
As of 2.6.26 the macros dev_name() and set_dev_name() are used to read
and set (respectively) the bus_id member in sysfs. As of 2.6.30 bus_id
is gone. This patch provides comaptiobility macros for older kernel
versions and removes direct usage of bus_id.
(closes issue #14965)
Patches:
xpp_2630_dev_name.diff uploaded by tzafrir (license 46)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6637 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The BRI module will now use hardhdlc unless the DAHDI tree has been
patched with the bri_dchan patch, in which case the old "bristuffed"
code will be used.
Thus it is now built by default.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6513 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6408 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
If NT/TE was changed (e.g: happened because of firmware bug)
We would be left with a lit led we don't know about.
From xpp rev. 6990
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6376 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix cases where the command_queue overflowed during initialization.
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5663 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Support for kernels that use the older hotplug support rather than the
newer uevent.
Fixes the xpp issue from #13427.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5130 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Sysfs representation for XPDs:
/sys/bus/xpds/devices/<bus>:<unit>:<subunit>
* Astribanks sysfs directories now include the XPDs as subdirectories:
e.g. /sys/bus/astribanks/devices/xbus-00/00:3:0
* procfs control interface deprecated: conditioned by OLD_PROC
(defaults to off). Control functionality moved to sysfs:
* xbus attributes: cls connector label status timing waitfor_xpds xbus_state
* XPDs can have driver-specific attributes. Common attriubtes:
blink chipregs span
* PRI-specific attributes:
pri_clocking pri_dchan pri_cas pri_alarms pri_layer1 pri_localloop pri_protocol
* The Astribank attribute "xbus_state" is read/write. Reading it shows
the current state of the Astribank. Writing "start" or "stop" allows a
software equivalent of connect or disconnect respectively.
* When an Astribank is ready it sends an "online" event. Whenever its
not ready (e.g. at the time of disconnect) it sends an "offline" event.
Use astribank_hook.sample to handle those.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5097 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Add support for CAS in the PRI module. Use firmware rev. 5975.
* Debugging parameter pcmtx_chan now accepts a dahdi channel number.
* Do initialize a reserved protocol field (card_global).
* The name DAHDI as used in proc/xpp/sync has 5 (not 6) letters.
* Fix DTMF "channel leak" regression in the FXS module.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4761 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4680 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Convert card_bri as well.
* memset each channel separately.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4517 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
this is always the case for dahdi.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4509 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4487 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4458 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4418 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4370 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4315 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|