Age | Commit message (Collapse) | Author |
|
* This is a minimal convertion -- everything compiles and looks OK.
* We print a warning for spans registering without a spantype.
* Low-level drivers may later want (but not required)
to fold their internal representations to this canonical
representation -- it will save code and make it more readable.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10683 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This patch removes support for kernel versions < 2.6.18, as those are
not actively supported in any major Linux distribution (except RHEL4,
which is in the "extended" support level of the product life cycle).
This removes much of the more #ifdef-rich parts of the code.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10472 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Less jargon.
* Fixes calculation: shows time passed rather than remaining time.
* Closes xorcom #1398.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10452 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10438 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10435 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10430 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Here it is:
KERNEL_STYLE="-npro -kr -i8 -ts8 -sob -l80 -ss -ncs -cp1"
TYPEDEFS='
-T gfp_t
-T __user
-T u_char
-T __u8
-T byte
-T bool
-T charp
-T xusb_t
-T xbus_t
-T xpd_t
-T xproto_table_t
-T xproto_entry_t
-T xframe_t
-T xpacket_t
-T reg_cmd_t
'
indent $TYPEDEFS $KERNEL_STYLE \
--ignore-newlines \
--indent-label0 \
--no-space-after-function-call-names \
"$@"
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10428 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Applied via:
perl -pi \
-e '/"/ and next;' \
-e '/^\s*\*/ and next;' \
-e '/\/\*.*byte/ and next;' \
-e '/typedef.*byte/ and next;' \
-e 's/\bbyte\b/__u8/g' "$@"
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10427 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Applied via:
sed -i -e '/"/!s/,\([^ \t]\)/, \1/g' "$@"
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10426 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Applied via:
perl -pi -e 's/\b(if|while|for|switch)\b\(/$1 (/g' "$@"
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10425 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Applied via:
perl -pi -e 's/ +\t/\t/g;' "$@"
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10424 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Applied via:
perl -pi -e 's/\b__FUNCTION__\b/__func__/g' "$@"
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10422 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Applied via:
perl -pi -e 's/[ \t]+$//' "$@"
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10421 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* xpd_echo (card_echo.c) - a module to handle an Astribank hardware echo
canceller module.
* All other XPDs are now of type 'telephony_device'. Only a telephony device
XPD provides a span to register.
* The EC module will typically show up as XPD-40 and will always show up as
Unregistered in 'dahdi_hardware -v'
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9993 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
gcc-4.6 now warns about variables that are set but never used. Clean up
unused variables everywhere except the oct612x subdirectory.
The oct612x should go in a separate patch in case that needs to be
pulled out into a separate project again.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9929 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Folded XPD_STATE() "protocol method" into the card_state() method.
It was only called from these (otherwise empty) methods.
Also it is not a "protocol method" for a very very very long time.
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9715 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Caller to CALL_XMETHOD() no longer need to explicitly pass xbus
(calculate xpd->xbus)
* Create CALL_PHONE_METHOD() similar to CALL_XMETHOD() -- inlining
the extra parameters (more readable)
* Reverse parameter order in PHONE_METHOD() and CALL_PHONE_METHOD()
to be consistent with XMETHOD() and CALL_XMETHOD()
* Rename XPD_STATE phonedev method to card_state:
- Consistency with other phonedev methods.
- These calls now Wrap internal calls to XPD_STATE protocol HOSTCMD
in PRI, BRI, FXS, FXO
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9706 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Allow having XPDs that represent a device that is not a span.
* Refactor all span related data from 'struct xpd' to 'struct phonedev'
* Refactor span related methods into 'phonedev->phoneops'
* Refactor phone related initialization into phonedev_init()/phonedev_cleanup()
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9704 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
One more thing that can be moved out of the per-span structure.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8986 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* PRI devices always get SYNC-AB (never PLL, not even for NT)
* Fix Timing priority calculation accordingly.
* On PRI layer1 changes, elect_syncer() is called, so we have
re-election.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8909 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This changeset should have no functional changes.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8877 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Make module parameters out of two constants to allow further tweaking in
the detection of battery.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7883 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
xpp rev: 7595
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7731 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Adds a struct module 'owner' member to the dahdi_span structure and updates
all the board drivers to set this member before registering the span. This
allows the core of dahdi to maintain the reference counts on the channels
itself.
(closes issue #10601)
Reported by: Matti
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6794 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Finishing the work of r6642. Complitly shut issue #14964.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6659 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
As of 2.6.26 the macros dev_name() and set_dev_name() are used to read
and set (respectively) the bus_id member in sysfs. As of 2.6.30 bus_id
is gone. This patch provides comaptiobility macros for older kernel
versions and removes direct usage of bus_id.
(closes issue #14965)
Patches:
xpp_2630_dev_name.diff uploaded by tzafrir (license 46)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6637 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6408 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix cases where the command_queue overflowed during initialization.
- Also add a 'command_queue_length' parameter to xpp.ko
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
- New 'offhook' attribute in:
/sys/bus/xpds/devices/??:?:?/offhook
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
* USB_FW.hex:
- Fixes cases where firmware loading would fail.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6046 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix cases where the command_queue overflowed during initialization.
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5663 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5133 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Support for kernels that use the older hotplug support rather than the
newer uevent.
Fixes the xpp issue from #13427.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5130 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Sysfs representation for XPDs:
/sys/bus/xpds/devices/<bus>:<unit>:<subunit>
* Astribanks sysfs directories now include the XPDs as subdirectories:
e.g. /sys/bus/astribanks/devices/xbus-00/00:3:0
* procfs control interface deprecated: conditioned by OLD_PROC
(defaults to off). Control functionality moved to sysfs:
* xbus attributes: cls connector label status timing waitfor_xpds xbus_state
* XPDs can have driver-specific attributes. Common attriubtes:
blink chipregs span
* PRI-specific attributes:
pri_clocking pri_dchan pri_cas pri_alarms pri_layer1 pri_localloop pri_protocol
* The Astribank attribute "xbus_state" is read/write. Reading it shows
the current state of the Astribank. Writing "start" or "stop" allows a
software equivalent of connect or disconnect respectively.
* When an Astribank is ready it sends an "online" event. Whenever its
not ready (e.g. at the time of disconnect) it sends an "offline" event.
Use astribank_hook.sample to handle those.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5097 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Also rename the CID_STYLE_* constants to formal names.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4979 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This is only an issue with the displayed value. In case you wondered why
you have battery voltage of more than 220V.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4776 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4760 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4682 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
in dahdi_rbs_sethook() to a much more readable and less error prone format.
In passing, get rid of the dahdi_txsig_t typedef, and fix uses of it
throughout the tree.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4679 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
ones (one allocation for each dahdi_chan structure, separate from any private structures used by the driver)
(closes issue #12657)
Reported by: tzafrir
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4513 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
this is always the case for dahdi.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4509 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* The compatibility zt_chan_alarm macro
* genzaptelconf.env is gone.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4459 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4418 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4370 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4315 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|