Age | Commit message (Collapse) | Author |
|
Merged revisions 8539 via svnmerge from
http://svn.digium.com/svn/dahdi/linux/trunk
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/branches/2.3@8545 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Adds a new compile-time option DAHDI_AUDIO_NOTIFY. With it there's a new
span hook, audio_notify, that gets called (if not NULL) whenever the
ioctl DAHDI_AUDIOMODE is called for a channel.
This can be useful to tell (in most cases) if an ISDN channel is active
or not and thus allow the low-level driver to optimize traffic when
channels are not active.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7691 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Send different values on alarm to make the remote party re-read state.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7591 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Provide some functions to access the CAS registers for E1, T1/ESF and
T1/D4. Mostly, relatively few changes.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7590 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
xpp revs: mostly 7458, 7466
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7457 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7266 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7245 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
(closes issue #15571)
Reported by: alecdavis
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6897 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Adds a struct module 'owner' member to the dahdi_span structure and updates
all the board drivers to set this member before registering the span. This
allows the core of dahdi to maintain the reference counts on the channels
itself.
(closes issue #10601)
Reported by: Matti
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6794 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Finishing the work of r6642. Complitly shut issue #14964.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6659 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
As of 2.6.26 the macros dev_name() and set_dev_name() are used to read
and set (respectively) the bus_id member in sysfs. As of 2.6.30 bus_id
is gone. This patch provides comaptiobility macros for older kernel
versions and removes direct usage of bus_id.
(closes issue #14965)
Patches:
xpp_2630_dev_name.diff uploaded by tzafrir (license 46)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6637 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6408 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix cases where the command_queue overflowed during initialization.
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5663 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Clock synchronization when sync is not from first port.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5320 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Support for kernels that use the older hotplug support rather than the
newer uevent.
Fixes the xpp issue from #13427.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5130 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Sysfs representation for XPDs:
/sys/bus/xpds/devices/<bus>:<unit>:<subunit>
* Astribanks sysfs directories now include the XPDs as subdirectories:
e.g. /sys/bus/astribanks/devices/xbus-00/00:3:0
* procfs control interface deprecated: conditioned by OLD_PROC
(defaults to off). Control functionality moved to sysfs:
* xbus attributes: cls connector label status timing waitfor_xpds xbus_state
* XPDs can have driver-specific attributes. Common attriubtes:
blink chipregs span
* PRI-specific attributes:
pri_clocking pri_dchan pri_cas pri_alarms pri_layer1 pri_localloop pri_protocol
* The Astribank attribute "xbus_state" is read/write. Reading it shows
the current state of the Astribank. Writing "start" or "stop" allows a
software equivalent of connect or disconnect respectively.
* When an Astribank is ready it sends an "online" event. Whenever its
not ready (e.g. at the time of disconnect) it sends an "offline" event.
Use astribank_hook.sample to handle those.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5097 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Add support for CAS in the PRI module. Use firmware rev. 5975.
* Debugging parameter pcmtx_chan now accepts a dahdi channel number.
* Do initialize a reserved protocol field (card_global).
* The name DAHDI as used in proc/xpp/sync has 5 (not 6) letters.
* Fix DTMF "channel leak" regression in the FXS module.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4761 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
in dahdi_rbs_sethook() to a much more readable and less error prone format.
In passing, get rid of the dahdi_txsig_t typedef, and fix uses of it
throughout the tree.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4679 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4518 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
ones (one allocation for each dahdi_chan structure, separate from any private structures used by the driver)
(closes issue #12657)
Reported by: tzafrir
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4513 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
this is always the case for dahdi.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4509 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* The configuration for XPP init_card_* scripts is done now
in /etc/dahdi/xpp.conf and uses a simple syntax (example included).
For PRI modules, the 'pri_protocol' setting, determines how
to configure it (E1/T1).
* In Astribank PRI modules, the LED behaviour represent which ports
are *CLOCK MASTER* (red color) and which are *CLOCK SLAVE* (green color).
Usually (but not always), this corresponds to the NT/TE settings in Asterisk.
* dahdi_genconf now replaces zapconf and deprecates genzaptelconf.
Relevant configuration settings were removed from the kernel
package and are implemented and described in the tools package.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4480 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4458 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4418 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4370 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4315 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|