Age | Commit message (Collapse) | Author |
|
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9710 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9709 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Keep the xpp version number up-to-date
* Non-verbose build output.
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9708 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Caller to CALL_XMETHOD() no longer need to explicitly pass xbus
(calculate xpd->xbus)
* Create CALL_PHONE_METHOD() similar to CALL_XMETHOD() -- inlining
the extra parameters (more readable)
* Reverse parameter order in PHONE_METHOD() and CALL_PHONE_METHOD()
to be consistent with XMETHOD() and CALL_XMETHOD()
* Rename XPD_STATE phonedev method to card_state:
- Consistency with other phonedev methods.
- These calls now Wrap internal calls to XPD_STATE protocol HOSTCMD
in PRI, BRI, FXS, FXO
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9706 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Add IS_PHONEDEV(xpd) macro
* Reject dahdi_register_xpd()/dahdi_unregister_xpd() for non-PHONEDEV
* Make sysfs 'offhook' attribute contain '\n' if empty (no channels)
* Skip PHONEDEV related xbus_tick() parts -- we still want to process
the end of it for the card_tick() calls.
* Remove BUG_ON() for missing phoneops
(also remove old duplicate test for XBUS_IS...)
* Call XPD_STATE method only for PHONEDEV XPD's
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9705 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Allow having XPDs that represent a device that is not a span.
* Refactor all span related data from 'struct xpd' to 'struct phonedev'
* Refactor span related methods into 'phonedev->phoneops'
* Refactor phone related initialization into phonedev_init()/phonedev_cleanup()
Signed-off-by: Oron Peled <oron@actcom.co.il>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9704 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Since the return value is not defined/used just return void.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9587 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Mostly linux/errno.h was included more than once.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9557 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
DAHDI_MAINT_LOOPSTOP is being removed due to the redundancy with
DAHDI_MAINT_NONE. Also removing some timing logic, as amount of time a
loopup or loopdown signal is held on the line, is now defined in
userspace with dahdi_maint.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9515 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The dahdi_span->maintq wait queue was very old and not being used so it
has been removed.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom..com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9514 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
If the span reports that it supports hooksig, DAHDI may fail to use RBS.
So remove a call to that stub function.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9506 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This fixes an annoying, though harmless issue: if Asterisk decides to send
voicemail messages to a channel (CAS, configured as FXS), We can't do
anything useful with them. So ignore them to avoid scary-looking messages
(from report_bad_ioctl()).
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9505 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Using semaphores as mutexes was removed from the kernel in 4882720b267b.
Just use straight semaphores now. 'DECLARE_MUTEX()' -> 'DEFINE_SEMAPHORE()'
and 'init_MUTEX()' -> 'sema_init()'.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
LKML-Reference: <20100907125057.562399240@linutronix.de>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9464 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Fixes a regression singce r8873: if pri_protocol is not explicitly set
(in /etc/dahdi/xpp.conf) and the device has (licences for) less than 4
"PRI" (E1/T1) ports, the initialization script will attempt to read from
a non-existing SysFS file, and bail out, resulting in a the device
failing to initialize.
For those non-existing ports we can just skip that part of the
initialization. So we just skip it.
Work around: explicitly set pri_protocol to E1 or T1, as needed.
Xorcom Rev: 8047. Ticket: 1334.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9430 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The check for DEFINE_SPINLOCK was spread throughout the source tree. If
not defined we can just define it in inlucde/dahdi/kernel.h. Now
include/dahdi/kernel.h is the only place that references
SPIN_LOCK_UNLOCKED (which breaks lockdep checking if DEFINE_SPINLOCK is
otherwise defined in the kernel).
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Review: https://reviewboard.asterisk.org/r/940/
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9411 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9028 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
We might as well ignore this, as we will get this at span registration
time anyway.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9025 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
One more thing that can be moved out of the per-span structure.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8986 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Part of preparation for adding additional callbacks to allow board
drivers to advertise and support gathering pre-echocan data from hardware
echocans.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8985 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The vast majority of board drivers already keep the dahdi_span structure
in a driver specific structure. The others were easily converted. This
way board drivers can use the container_of macro to find what was
previously pointed to by the "pvt" member of the span. One less thing
to think about in the span structure.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8984 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8975 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* If we have vmwi_ioctl=N, we should initialize the vmwi_type
of all channels. We initialize it to HVAC
* Fix a regression, where curly braces around empty if()'s were removed.
* Also fix the VMWI_TYPE() macro, so it actually uses the 3'rd parameter.
(this didn't cause damage yet, as we only used HVAC so far)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8943 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This is the second part of the partial fix in r8872, though each of the
two should work independently.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8931 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Fixes reading capabilities when the watchdog is set. In that case most
of the data, as seen, e.g. in output of 'astribank_allow', was 0xFF.
Xorcom rev: 7809
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8930 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This avoids most cases of sending garbage at startup by setting each port
to tristate mode at init time (in the init script) and enable it back at
DAHDI_STARTUO (end of dahdi_cfg).
Upgrade note: if you have upgraded the files (including init script) but old
module is still loaded, you may end up with the port not getting ever
enabled and the line practically dead. In such a case, reload the new module.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8922 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Now get_xbus() receive and xbus number (not poiner) and uses xbus_num()
internally to map it to an xbus pointer + refcount increment. (this is
atomic)
* Migrate all obvious places that used xbus_num() to map bus number into a
pointer, so now they use get_xbus() + put_xbus() to aquire and release an
xbus.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8913 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* PRI devices always get SYNC-AB (never PLL, not even for NT)
* Fix Timing priority calculation accordingly.
* On PRI layer1 changes, elect_syncer() is called, so we have
re-election.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8909 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Don't let AB which are unplugged/replugged create duplicate XBUS's (if
asterisk don't close the original channels).
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8905 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Astribank devices now reside under their own top-level device.
* The USB device is still used as the 'transport'.
* This means the astribanks parents are NOT the USB devices.
* As a result, even after a USB disconnect, we have valid sysfs representation.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8904 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
When the USB device disconnects, we keep references to them to make sure
they don't disappear.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8900 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Don't attempt to reset the span flag DAHDI_FLAG_RBS.
At pre-registration we don't yet know if we're CAS or not.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8896 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Make sure we only consider T1-s to be potentially D4 (which requires
sending the bits twice). This fixes occasional command-queue floods in
E1 CAS.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8892 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8888 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Supports only our current NEON notification.
* No more global 'vmwineon' parameter:
- We expect asterisk to tell us by channel.
- If 'vmwi_ioctl' is not set (it is by default), that we revert
to FSK searching (expensive) and call directly our NEON code
(as before).
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8887 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Fixes a crash resulting from a race between disconnecting and connecting
Astribanks (on multi-core systems)
* Use get_xbus()/put_xbus() arround xbus_populate(), so a disconnect
in the middle won't release the xbus too early.
* Aquire all XPDs before starting initialization and release them
after it finishes (so we don't have up/down races among XPDs)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8886 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* The worker member of 'struct xbus' is now an embedded struct xbus_workqueue.
* Replace wake_up() to wake_up_interruptible_all().
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8882 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Change refcount_xpd(): instead of returning a pointer to the atomic
counter, return directly its value (just like refcount_xbus())
* Add a refcount_xbus and refcount_xpd attributes to sysfs (for debugging)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8878 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This changeset should have no functional changes.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8877 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
When initializing registers for the "PRI" (E1/T1) module, in the case the
user has not explicitly asked for E1/T1 settings in xpp.conf (pri_protocol)
fall back to the current value, which is the build-time fall-back.
The value is read from sysfs.
Previously we implicitly assumed this value is E1.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8873 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8872 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
usb_buffer_alloc has been replaced with usb_alloc_coherent , and likewise
usb_buffer_free has been replaced with usb_free_coherent. in kernels 2.6.34
the older names are proxies for the new ones, and in 2.6.35 the older names are gone.
This patch defines the new names for the old ones, for older kernel versions.
(closes issue #17383)
Reported by: Chainsaw
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8762 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8539 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
include/dahdi/kernel.h"
Reverts r8117. The wctdm24xxp driver can include <stdbool.h> directly.
Reported by: seanbright
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8134 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
I intend to use the bool definition in the wctdm24xxp driver and don't want to
duplicate the definition.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@8117 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
(not intended to be installed)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7964 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Make module parameters out of two constants to allow further tweaking in
the detection of battery.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7883 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7843 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Fixes various minor twinstar-related bugs.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7815 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Should help for the case of multiple quad-PRI Astribanks on a single
system.
xpp rev: 7666.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7807 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Note that this change will not work on most older systems (e.g.:
Centos5, with its udev 0.95) if the matching change of xpp_fxloader in
tools (r7752) is not applied.
* Replace deprecated 'BUS' with 'SUBSYSTEM'
* Sysfs{} should be replaced with ATTR{}. Sadly the former is not
supported in recent udev, and the latter is not supported in udev
0.95. Workaround: use PRODUCT from the environment.
* Use a single rule.
* While we're at it, add the missing comma to the astribank_hook line
(which surprisingly worked without it).
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7753 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|