Age | Commit message (Collapse) | Author |
|
xpp revs: mostly 7458, 7466
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7457 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7456 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Commit d43c36 made it necessary to add sched.h to more of the board drivers.
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=d43c36
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7392 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7293 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7276 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7266 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7245 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Done in preperation for T1 CAS support, as the PRI module will use RBS
instead.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7244 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7237 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* '/usr/share/dahdi/init_card_2_30 -L' will now list valid
opermodes
* Proper usage message while we're at it.
* Make input opermode case-insensitive.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7236 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
2.6.32-rc1 broke direct access to the member 'driver_data' of 'struct
device'. However direct access to wasn't proper in the first place.
This commit replaces direct access to dev->driver_data with
dev_get_drvdata() and dev_set_drvdata().
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@7226 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Prevents a crash on 2.6.22 when CONFIG_SLAB is set and CONFIG_SLAB_DEBUG is
not.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6995 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The owner field should only tested after the low-level driver
pre-registration method is called.
xpp rev: 7287
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6967 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6966 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Fixes PCM issue with an Astribank2 (116x) FXO module that is installed
alongside a PRI/BRI module.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6938 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
(closes issue #15571)
Reported by: alecdavis
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6897 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Adds a struct module 'owner' member to the dahdi_span structure and updates
all the board drivers to set this member before registering the span. This
allows the core of dahdi to maintain the reference counts on the channels
itself.
(closes issue #10601)
Reported by: Matti
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6794 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Finishing the work of r6642. Complitly shut issue #14964.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6659 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Also fixes LED blinking issues in PRI modules
* Various bugfixes in the PICs.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6653 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Note that They will only take effect after a reset.
Firmware rev. 7071.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6651 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This adds a compatibility macro for older versions that is a noop for
kernels >= 2.6.30.
(closes issue #14964)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6642 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This generally is a case that would not happen in the wild, though.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6641 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6640 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6639 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
As of 2.6.26 the macros dev_name() and set_dev_name() are used to read
and set (respectively) the bus_id member in sysfs. As of 2.6.30 bus_id
is gone. This patch provides comaptiobility macros for older kernel
versions and removes direct usage of bus_id.
(closes issue #14965)
Patches:
xpp_2630_dev_name.diff uploaded by tzafrir (license 46)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6637 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6542 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The BRI module will now use hardhdlc unless the DAHDI tree has been
patched with the bri_dchan patch, in which case the old "bristuffed"
code will be used.
Thus it is now built by default.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6513 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6466 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The Id SVN keyword is set locally in Xorcom and used as an identifier.
That Id should not be overriden by this SVN repository.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6465 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
FPGA_1161.hex rev. 7024.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6457 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
FPGA_1161.hex: xpp rev 7007
PIC_TYPE_*.hex: xpp rev 7000
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6409 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6408 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6407 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6393 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
From xpp rev. 6974.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6386 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
From xpp rev. 6979
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6377 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
If NT/TE was changed (e.g: happened because of firmware bug)
We would be left with a lit led we don't know about.
From xpp rev. 6990
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6376 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6344 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6312 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* New software to load in the udev rules
* New control protocol ("MPP")
* More modular FPGA firmware
From Xorcom rev. 6963.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6311 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Minor bug fixes
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6302 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This message is used when an xpp span is a DAHDI sync master but also
set to take timing from the DAHDI master. This means wrong settings:
user is wasting CPU cycles.
However notifying the user about it every second is still too much.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6301 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Previous USB_FW.hex, 6770, has failed to properly read the USB iSerial
field ("Label" in xpp terms). This is fixed here.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6191 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This makes dahdi_config.h part of the "offcial" interface to external
modules. Practically most of its configuration items are internal to
dahdi-base. But some are intended for other drivers.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6177 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6136 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Demote some messages to be debug messages.
* Rephrase the message about defaults for the PRI module (the driver's
defaults are used, which is OK)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6135 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
CONFIG_SLUB_DEBUG, as in Fedora Core 6.
Fixes kernel oops when loading/unloading dahdi modules. DAHDI-226
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6096 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
New FPGA firmware with a number of bug fixes.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6079 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix cases where the command_queue overflowed during initialization.
- Also add a 'command_queue_length' parameter to xpp.ko
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
- New 'offhook' attribute in:
/sys/bus/xpds/devices/??:?:?/offhook
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
* USB_FW.hex:
- Fixes cases where firmware loading would fail.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6046 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
As moduel_refcount is only used for debugging, disable it in this
non-common case.
(Closes issue #14402)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5987 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|