Age | Commit message (Collapse) | Author |
|
* New software to load in the udev rules
* New control protocol ("MPP")
* More modular FPGA firmware
From Xorcom rev. 6963.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6311 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Minor bug fixes
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6302 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This message is used when an xpp span is a DAHDI sync master but also
set to take timing from the DAHDI master. This means wrong settings:
user is wasting CPU cycles.
However notifying the user about it every second is still too much.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6301 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Previous USB_FW.hex, 6770, has failed to properly read the USB iSerial
field ("Label" in xpp terms). This is fixed here.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6191 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This makes dahdi_config.h part of the "offcial" interface to external
modules. Practically most of its configuration items are internal to
dahdi-base. But some are intended for other drivers.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6177 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6136 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Demote some messages to be debug messages.
* Rephrase the message about defaults for the PRI module (the driver's
defaults are used, which is OK)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6135 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
CONFIG_SLUB_DEBUG, as in Fedora Core 6.
Fixes kernel oops when loading/unloading dahdi modules. DAHDI-226
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6096 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
New FPGA firmware with a number of bug fixes.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6079 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix cases where the command_queue overflowed during initialization.
- Also add a 'command_queue_length' parameter to xpp.ko
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
- New 'offhook' attribute in:
/sys/bus/xpds/devices/??:?:?/offhook
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
* USB_FW.hex:
- Fixes cases where firmware loading would fail.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6046 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
As moduel_refcount is only used for debugging, disable it in this
non-common case.
(Closes issue #14402)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5987 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* FPGA_1141.hex 6268 2008-10-27
* FPGA_1151.hex 6268 2008-10-27
* FPGA_1131.hex 6177 2008-09-26
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5759 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5710 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Add an extra sysfs Astribank attribute for drift information
* PCM synchronization bugfix
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5709 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5708 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5688 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix cases where the command_queue overflowed during initialization.
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5663 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5504 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5498 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5492 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5483 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5402 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5397 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
README.
* Some extra asciidoc formatting fixes.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5340 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Clock synchronization when sync is not from first port.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5320 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The BIOSes included in a number of motherboards could hang from an
Astribank firmware newer than 1.2.20.1 / 1.4.5.1 . This was due to an
some incorrect USB information in the firmware. This firmware fixes it.
Merged Zaptel revisions 4580 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5310 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Fixes #13832 in Zaptel.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5288 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Temporarily increase the maximal size of the command queue from 300 to
500 as a workaround of an issue at initialization time (mainly of
BRI+FXS).
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5167 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5133 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5132 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Fixes the xpp warnings of #13763 (except some false alarms).
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5131 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Support for kernels that use the older hotplug support rather than the
newer uevent.
Fixes the xpp issue from #13427.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5130 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5115 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Sysfs representation for XPDs:
/sys/bus/xpds/devices/<bus>:<unit>:<subunit>
* Astribanks sysfs directories now include the XPDs as subdirectories:
e.g. /sys/bus/astribanks/devices/xbus-00/00:3:0
* procfs control interface deprecated: conditioned by OLD_PROC
(defaults to off). Control functionality moved to sysfs:
* xbus attributes: cls connector label status timing waitfor_xpds xbus_state
* XPDs can have driver-specific attributes. Common attriubtes:
blink chipregs span
* PRI-specific attributes:
pri_clocking pri_dchan pri_cas pri_alarms pri_layer1 pri_localloop pri_protocol
* The Astribank attribute "xbus_state" is read/write. Reading it shows
the current state of the Astribank. Writing "start" or "stop" allows a
software equivalent of connect or disconnect respectively.
* When an Astribank is ready it sends an "online" event. Whenever its
not ready (e.g. at the time of disconnect) it sends an "offline" event.
Use astribank_hook.sample to handle those.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@5097 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4986 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* This commit fixes display of indirect registers through the chipregs
(formly "slics") procfs file. Only the low byte was displayed.
* It also deprecates previous {RW}S in favour of {RW}I. The prevois
style is still allowed but deprecated, and thus previous scripts will
still work.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4980 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Also rename the CID_STYLE_* constants to formal names.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4979 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4894 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4840 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
(closes issue #13253)
Reported by: raiden
Patches:
zap-dev.patch uploaded by smurfix on issue #13277 (license 547)
zap-sema.patch uploaded by smurfix on issue #13277 (license 547)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4801 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4784 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4781 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This is only an issue with the displayed value. In case you wondered why
you have battery voltage of more than 220V.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4776 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Add support for CAS in the PRI module. Use firmware rev. 5975.
* Debugging parameter pcmtx_chan now accepts a dahdi channel number.
* Do initialize a reserved protocol field (card_global).
* The name DAHDI as used in proc/xpp/sync has 5 (not 6) letters.
* Fix DTMF "channel leak" regression in the FXS module.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4761 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4760 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4759 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4758 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Fix some cases of double digits.
* Fix some rare cases of a BRI unit providing incorrect directionality.
* Extra debugging code in card_fxs.c to trace future DTMF issues.
* Properly note Zaptel (as opposed to DAHDI) ioctls.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4695 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Also remove a small duplication in dahdi-base.c, as I'm too lazy to
fix in two separate places.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4688 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
(closes issue #11504)
Reported by: tzafrir
Patches:
20080717__issue11504_dahdi_printk_without_priority.diff uploaded by bbryant (license 36)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4685 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|