Age | Commit message (Collapse) | Author |
|
* Also fixes LED blinking issues in PRI modules
* Various bugfixes in the PICs.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6653 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Note that They will only take effect after a reset.
Firmware rev. 7071.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6651 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This adds a compatibility macro for older versions that is a noop for
kernels >= 2.6.30.
(closes issue #14964)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6642 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This generally is a case that would not happen in the wild, though.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6641 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6640 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6639 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
As of 2.6.26 the macros dev_name() and set_dev_name() are used to read
and set (respectively) the bus_id member in sysfs. As of 2.6.30 bus_id
is gone. This patch provides comaptiobility macros for older kernel
versions and removes direct usage of bus_id.
(closes issue #14965)
Patches:
xpp_2630_dev_name.diff uploaded by tzafrir (license 46)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6637 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6628 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
I accidentally changed to print everytime. They should only be printed if
DEBUG_ECHOCAN is specified in the debug module parameter.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6625 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Before this commit, dahdi_tool would report "Internally clocked" for boards
supported by the wcte12xp driver both when receiving timing from the span and
providing it to the span. Now it reports "Internally clocked" if providing
timeing to the span, and the card if receiving timeing from the span.
DAHDI-65.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6621 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6610 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
is set to the new 'generic' x86 flavor available in recent Linux kernel releases
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6609 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
does not support HPEC or the VPMADT032 firmware loader, so the user will know why they are not included
clean up the conditional logic for these items in the Kbuild file
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6607 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Expose the vpmnlptype, vpmnlpthresh, and vpmnlpmaxsupp as module parameters
like for the wctdm24xxp.
DAHDI-261
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6590 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Move the echo can channel parameters into a common location for both the
wcte12xp and wctdm24xxp drivers that use the voicebus module. This is intended
to make it clearer which differences are required between the clients.
Additionally, update the default parameters to the new recommended values.
VPMADT032-37
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6589 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Depending on the system latency, the deferred work for the vpmadt032 can take
up to 200ms. This change allows each vpmadt032 to use its own workqueue, and
not the global system workqueue. This prevents vpm operations from blocking
the main system workqueue for extended periods.
This restores the behavior to the way it was before the common vpmadt032 code
was moved out of the wctdm24xxp and wcte12xp drivers.
DAHDI-260
voicebus-squash: Adding the wq name.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6572 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The 'suppression' default for the NLP provides better echo canceling
performance. Also ensures that the wctdm24xxp and wcte12xp driver use the
same default values.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6568 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6564 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
level defaults when echo can is freed. (Previously they were zero'd out)
DAHDI-257
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6562 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Linux 2.6.9 does not contain that definition, but the older definition is
deprecated since it defeats lock state checking. DAHDI-253
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6554 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
DAHDI-253
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6553 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Linux kernel 2.6.9 does not define mmiowb. DAHDI-253
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6552 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
DAHDI-253
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6551 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This definition was just copied from the xpp driver.
DAHDI-253
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6550 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
DAHDI-253
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6549 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
For these drivers, when the vpmsupport module parameter is set to zero, don't
even register the span as supporting echo cancellation.
DAHDI-250
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6544 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6542 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Echo cancelers are now able to report if they are able to automatically disable
their NLP portions in the presence of tones in the audio stream. Also, the
interface is changed to allow user space to just disable the NLP portion of the
echo canceler. These changes improve fax and modem handling in DAHDI.
This commit merges in the changes on
http://svn.digium.com/svn/dahdi/linux/team/kpfleming/echocan_work
Patch by: kpfleming
Also contains improvements to CED tone detection.
(closes issue #13286)
Reported by: viniciusfontes
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6529 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6528 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The voicebus library was previously linked into both the wcte12xp and wctdm24xxp
drivers. It is now broken out into it's own module and the common parts of the
vpmadt032 interface are now located in that module to reduce duplication between
the wcte12xp and wctdm24xxp drivers.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6527 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The netif_rx_xxx functions were dropped from the linux kernel source on
2009-01-21 in commit 288379f050284087578b77e04f040b57db3db3f8.
(closes issue #14963)
Reported by: tzafrir
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6526 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The command queue for reading from the registers on the framer is now stored in
a linked_list instead of an array. Allows for the locks to protect this
structure to be held for shorter periods of time and reduces the need to cycle
through all the elements in the array to decide if there is a command in the
queue to process. Remove the usecount and dead members from struct t1 since the
module reference count will allow us to know when it's safe to free up the
memory. This change also moves alarm processing out of the interrupt handler and
removes the need for special interrupt handling of commands.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6525 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
This removes support for using the real-time clock as a timing source in
dahdi_dummy. Instead, the normal kernel timers method is now more accurate
since it keeps track of how much real time has passed to determine how many
times to call dahdi_receive and dahdi_transmit. This method was originally
suggested by bmd.
(closes issue #13930)
(closes issue #14884)
Reported by: tzafrir
Tested by: dbackeberg, ask
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6524 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6523 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The BRI module will now use hardhdlc unless the DAHDI tree has been
patched with the bri_dchan patch, in which case the old "bristuffed"
code will be used.
Thus it is now built by default.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6513 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6466 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
The Id SVN keyword is set locally in Xorcom and used as an identifier.
That Id should not be overriden by this SVN repository.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6465 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
FPGA_1161.hex rev. 7024.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6457 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
use the proper type for the flags variable in dahdi_ppp_xmit()
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6444 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
FPGA_1161.hex: xpp rev 7007
PIC_TYPE_*.hex: xpp rev 7000
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6409 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6408 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6407 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6393 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
From xpp rev. 6974.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6386 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
From xpp rev. 6979
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6377 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
If NT/TE was changed (e.g: happened because of firmware bug)
We would be left with a lit led we don't know about.
From xpp rev. 6990
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6376 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6344 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6312 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* New software to load in the udev rules
* New control protocol ("MPP")
* More modular FPGA firmware
From Xorcom rev. 6963.
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6311 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
Minor bug fixes
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@6302 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|