| Age | Commit message (Expand) | Author |
|---|
| 2008-11-16 | Fixed USB firmware that caused some bad bioses to hang on boot. | Tzafrir Cohen |
| 2008-11-13 | Make a message about the host cacheline size being unsupported a debug only | Shaun Ruffell |
| 2008-11-10 | xpp init_card_2_30: no need to check environment in verify mode. | Tzafrir Cohen |
| 2008-11-10 | - Do not hold any locks while calling close_channel, which can result in calls | Shaun Ruffell |
| 2008-11-09 | We only use print_debug_writebuf when CONFIG_DAHDI_NET or CONFIG_DAHDI_PPP ar... | Sean Bright |
| 2008-11-09 | Add missing semi-colon. | Sean Bright |
| 2008-11-05 | Whitespace changes for the coding standard. | Shaun Ruffell |
| 2008-11-05 | rate limiting a diagnostic printk. | Shaun Ruffell |
| 2008-11-05 | Fix warning messages in order to build on 2.6.27. | Shaun Ruffell |
| 2008-11-05 | Check the return value of the down_interruptible call in order to quiet a | Shaun Ruffell |
| 2008-11-05 | Remove the loopback module parameter since it's not implemented yet. | Shaun Ruffell |
| 2008-11-05 | Allow the wcb4xxp to take all the signalling types. | Shaun Ruffell |
| 2008-11-03 | Adjust DAHDI to the new timers interface of kernel 2.6.28 | Tzafrir Cohen |
| 2008-11-02 | dahdi-base: hw_echocancel_off: return 0 if no hardware EC | Tzafrir Cohen |
| 2008-10-31 | Changing the spantype to indicate whether it is a TE or NT BRI port. | Shaun Ruffell |
| 2008-10-31 | Fix the FIFO configuration to use the data from the EC correctly | Matthew Fredrickson |
| 2008-10-31 | wcb4xxp: Set the spantype to "BRI" (to show e.g. in dahdi_scan) | Tzafrir Cohen |
| 2008-10-31 | wcb4xxp: Claim to provide DACS for dahdi_scan | Tzafrir Cohen |
| 2008-10-31 | Fix for a case where a span might not always come back up after a disconnect. | Shaun Ruffell |
| 2008-10-30 | Use correct length for the, well, dahdi transcoder device name. | Tzafrir Cohen |
| 2008-10-30 | Use ! to hint udev about directory separator. | Tzafrir Cohen |
| 2008-10-29 | The /proc/wcb4xxp should not be created once for each card but rather once for | Shaun Ruffell |
| 2008-10-29 | By default, do not create the procfs entry for the wcb4xxp driver. | Shaun Ruffell |
| 2008-10-29 | xpp: Increase the maximal size of the command queue to 500 . | Tzafrir Cohen |
| 2008-10-28 | fix a large number of warnings found by sparse, the kernel code sanity checki... | Kevin P. Fleming |
| 2008-10-28 | Adding the wcb4xxp driver, a native dahdi driver for the B410P module. | Shaun Ruffell |
| 2008-10-28 | Undoing commit r5148. Copying directly from a private branch causes problems | Shaun Ruffell |
| 2008-10-28 | Adding the wcb4xxp driver, a native dahdi driver for the B410P module. | Shaun Ruffell |
| 2008-10-27 | xpp fxo: Add sysfs battery attribute. | Tzafrir Cohen |
| 2008-10-27 | xpp: remove an unused manual reference count field. | Tzafrir Cohen |
| 2008-10-27 | xpp: Make some definitions static, as per sparse. | Tzafrir Cohen |
| 2008-10-27 | Fix xpp compile problems on kernel < 2.6.16 | Tzafrir Cohen |
| 2008-10-22 | Fix building on big endian machines. | Jason Parker |
| 2008-10-22 | wct1xxp: fix error handling at device startup. | Tzafrir Cohen |
| 2008-10-22 | xpp FXS init script: Do use high-pass filter. | Tzafrir Cohen |
| 2008-10-21 | An experimental OSLEC echocan module. | Tzafrir Cohen |
| 2008-10-16 | xpp: start migration from procfs to sysfs. | Tzafrir Cohen |
| 2008-10-14 | If the vpmad032 firmware needs to be reloaded, make sure we use the same slot | Shaun Ruffell |
| 2008-10-10 | - Ensure that the source format is considered when selecting a transcoder. | Shaun Ruffell |
| 2008-10-09 | a micro-optimization found while creslin and i spent four or five hours track... | Kevin P. Fleming |
| 2008-10-06 | use the same logic here as elsewhere for releasing echocan module references | Kevin P. Fleming |
| 2008-10-06 | Embed room for the complete packet to the DTE in the transcoder buffer | Shaun Ruffell |
| 2008-10-06 | Fix a few compile errors that only show up when CONFIG_DAHDI_PPP is | Sean Bright |
| 2008-10-03 | Fix building with CONFIG_DAHDI_NET in kernel 2.6.22 | Tzafrir Cohen |
| 2008-10-03 | Fix building with CONFIG_DAHDI_NET . It builds, but will it run? | Tzafrir Cohen |
| 2008-10-03 | Fix some compilation problems that show up when CONFIG_DAHDI_DEBUG is defined. | Sean Bright |
| 2008-10-03 | There are two possible valid statues when booting the TC400M. | Shaun Ruffell |
| 2008-10-02 | Keep hold of the channel lock when setting the data_ready flag for the channel | Shaun Ruffell |
| 2008-10-02 | wctc4xxp_cleanup_channel_private needs a pointer to the zt_transcoder_channel | Shaun Ruffell |
| 2008-10-02 | Mark that there is not any data waiting whenever we cleanup the private | Shaun Ruffell |
