From 49073b84b61ea03df09aa5d126a2c71a245e63d9 Mon Sep 17 00:00:00 2001 From: Tzafrir Cohen Date: Thu, 14 Aug 2008 21:37:41 +0000 Subject: Set xpp version to 6056 and reset XPP changelog. git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4784 a0bf4364-ded3-4de4-8d8a-66a801d63aff --- drivers/dahdi/xpp/Changelog_xpp | 319 +--------------------------------------- 1 file changed, 2 insertions(+), 317 deletions(-) (limited to 'drivers/dahdi/xpp/Changelog_xpp') diff --git a/drivers/dahdi/xpp/Changelog_xpp b/drivers/dahdi/xpp/Changelog_xpp index 348bc1c..47b1be8 100644 --- a/drivers/dahdi/xpp/Changelog_xpp +++ b/drivers/dahdi/xpp/Changelog_xpp @@ -1,317 +1,2 @@ -Tue, 13 May 2008 Oron Peled - xpp.r5744 - * New firmware protocol version: 30 - * New numbers for the device types: (e.g. in card_init* scripts) - - FXS: 1 (was: 3) - - FXO: 2 (was: 4) - - BRI: 3 (was: 6 for TE, 7 for NT) - - PRI: 4 (was: 9) - * Init scripts of FXS and FXO modules are now written in Perl as well - (be sure to have File::Basename, e.g: perl-modules in Debian). - * calibrate_slics merged into init_card_1_30 . - * Each of the init_card_* scripts now runs no more than once per card even - if this card represents several XPD's (e.g: quad PRI, BRI). This means - maximum of 4 script runs per Astribank. - * Zaptel registration now briefly flash all LED's (not just the green ones as - before). - * Module parameter print_dbg was renamed to debug for consistency with - the rest of zaptel. - * init_fxo_modes removed: content moved into init_card_2_30, verified - at build time. - * FXO: removed polling for power-denial. New firmware notifies us. - * Code tested with sparse. Most warnings were fixed. - * Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get - ignored by ztscan. - * fpga_load: Handle null config_desc we get from some crazy USB controllers. - * genzaptelconf: Fix reporting of empty slots in list mode. - * xpp_blink can now blink the led of a single analog port. - * "slics" has been renamed "chipregs". - * Fixed a small typo in fpga_load(8). - * Fixed bashism in xpp_fxloader. - -Thu, 20 Mar 2008 Oron Peled - xpp.r5566 - * Build: - - Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/* - - We conditionally use old/new directory scheme: - In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's - not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well). - - Fix compile warnings on 64 bit systems. - - Compile fixes for kernel-2.6.24 - * UDEV: - - /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook. - - astribank_hook: Modify to do nothing. Add some documentation. - * Autoconfiguration -- zapconf: - - Don't fail zapconf et.al. if no config file was found. - - Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?). - - Add some newer Digium cards to our hardware inventory. - - Partially handle cases where the /proc/zaptel strings does not contain - info about E1/T1/J1 or NT/TE. - * Better SYNC: - - Finer tuning of PLL (New firmware). - - Change calculation algorithm of sync offset. It now copes better - with the variance in USB frame reception timing. - - Statistics: - . The view of results was moved from /proc/xpp/XBUS-*/summary to - a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced. - . A new xpp_timing script shows all astribanks. - . A new write only /sys/bus/astribanks/devices/xbus-*/cls is - used to clear statistics. Eventually, clearing of XBUS related - statistics should be done here. One that was migrated is the - clearing of 'PCM [TR]X:' numbers currently appearing in - /proc/xpp/XBUS-*/summary (they should be moved too later). - - Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB") - adapted their use in printk and /proc so the text is clear. - - Added a command line parameter xpp.disable_pll_sync to stop all - adjustments command to AB (calculations still continue as usual). - * PRI: - - 4 port support - - set clocking master span via ztcfg, like other zaptel devices. - * FXO: - - Fix false hangups in some countries (voltage fluctuations). - - Some countries send caller-id before first ring. - Added code to handle caller-id PCM pass through according to - a new command line parameter (xpd_fxo.caller_id_style). - - No longer sends an event on zt_open. See #12160 . - * FXS: Re-enable dtmf_detection. - * Misc: - - Adapt to zaptel-1.4.8 and above ztscan: added fields returend by - new ZT_SPANSTAT_V2 ioctl() - - Document sysfs and waitfor_xpds. - - Miscelaneous optimizations and bugfixes. - - Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has - replaced it a long time ago. - - Add RX_CMD counter to /proc/xpp/XBUS-*/summary - - Unclutter some of the usb disconnect messages. - - xpp_usb: minor preformance improvements in receive. - Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb -Thu Jan 10 2008 Oron Peled - xpp.r5254 - * Improved polarity reversal hangups in FXO (r5194). - Fixed false detection of polarity reversals. - * Optimize xframe allocation, by not zeroing the whole - memory (in get_xframe()). - * Fixed erronous error message that appeared sometimes - from fpga_load during USB renumeration. - * Zaptel::Chans now provides battery() reporting for some FXO - channels (Astribank FXO and wcfxo). - -Tue Dec 25 2007 Tzafrir Cohen - xpp.r5179 - * xpd_pri: Basically ready. - * PCM synchronization changes: - - Each Astribank unit ticks independently. Each with its own PLL. - - HOST synchronization is gone. Loading of xpp will no longer cause - useless 250 ticks per second if you have no Astribank. - - Synchronization from the zaptel sync master requires setting - ZAPTEL as sync source (xpp_sync ZAPTEL). - * rx_tasklet is now a parameter of the module xpp, rather than of xpp_usb. - * New FPGA firmware: 5128 (1151) / 5122 (1141, 1131): - - Fixes synchronization issues. - - PRI module: E1/T1 should now work. - * perl module and utilities: - - Modules no longer magically scan system on initialization. - - Scanning is by calling explicit methods. - - "Serial" has been renamed "Label". It is basically unique, but - should be modifieble. - - Some basic documentation of zaptel perl modules. - * Default sort order of zt_registration is back to SORT_CONNCTOR. - * zt_registration proc file now shows the number of span registered to - if registered. Try: grep . /proc/xpp/XBUS-*/XPD-*/zt_registration - * genzaptelconf: Allow using a custom command instead of - /etc/init.d/asterisk to start/stop asterisk. - * Fixed the typo "Slagish". - -Wed Nov 14 2007 Tzafrir Cohen - xpp.r5010 - * Fix a deadlock spotted on some SMP installations. - * increase FXS ring detect debounce interval. - * Improve (reduce) signal attenuation on FXO ports. - * zaptel-perl: further fixes to handling of empty slots. - -Wed Oct 3 2007 Tzafrir Cohen - xpp.r4900 - * Zaptel/Hardware perl modules: - - Use sysfs directly. Don't rely on lspci/lsusb. - - Each device has a description and driver name. - - Zaptel::Hardware::drivers() to show the list of required drivers - for this system (see zaptel_drivers). - - zaptel_hardware shows a description and a (suggested?) driver. - * zt_registration sorts by Serial first and only then by connector. - * USB_FW.hex replaces all the USB_11x0.hex . - - Separate USB interface for the management processor. - - Hence fpga_load can now work even with drivers loaded. - * Fix firmware upgrading. - * Fix manual firmware loading while auto-loading. - * Fix opermode parameter for FXO initialization (broken in r4648). - -Wed Oct 3 2007 Oron Peled - xpp.r4786 - * New firmware protocol version: 2.9 . - * fpga_load: initial clean-ups before interface split. - * genzaptelconf: Don't leave an empty directory behind (4784) - * Increase xpp poll_timeout to 1000ms - useful for CentOS 4 (r4781). - * Fix initialization anoyance: if AB don't answer to polls, don't - waitfor_xpds, and show no waiting XPDs (r4725). - * Disable dtmf_detection by default once again (r4712). - * Don't check twice for asterisk to stop. The second test was done - while Asterisk was still stopping (r4708). - * Support building the kernel with M= instead of with SUBDIRS= , as - used in some newer build systems (r4677). - -Tue Sep 11 2007 Oron Peled - xpp.r4648 - * New firmware protocol version: 2.8 . - * Cleanup INFO() messages during module loading. - - * USB: Receive queue with TASKLETS [r4600]. Controlled by rx_tasklet - parameter to xpp_usb module (can be changed in runtime). - * The pcm_tasklet parameter in xpp module is deprecated: - - Does not actually do anything. - - If set during module loading, shows an ERR() message. - - Also appears in /proc/xpp/sync - - * FXS: Hardware DTMF detection by default, can be disabled - by setting dtmf_detection=0 parameter to xpd_fxs. - PCM is muted when DTMF key is pressed. - - * zapconf: - - Can now generate users.conf compatible with asterisk-gui. - - Optional command-line arguments denoting which files to generate. - Possible values are 'zaptel', 'zapata' and 'users'. - - Defaults to creating zaptel and zapata. - - * Update to zaptel-1.4.5.1, zaptel-1.2.20.1 - * Fix building on kernel 2.6.23rc1, from Axel Thimm. - * New firmware to fix FXS leds irregularities. - * Less noise at build time - don't echo version, test compile ony once. - * zapconf can generate users.conf snippets. - -Thu Aug 16 2007 Tzafrir Cohen - xpp.r4515 - * Don't use Astribanks connected to USB1 interfaces - Unless the user set the option usb1=1 for xpp_usb (r4504). - * README.Astribank can now be generated from the makefile (r4503). - * Demote the messages about PCM in non-PCM from notice to debug (r4501). - * Fix sample BRI zapata.conf: NT instead of TE (r4498). - * Disable FXS hardware DTMF detection by default (r4492). - * Extra Zaptel PCI IDs (from Philipp Kempgen) (r4466). - -Thu Aug 2 2007 Oron Peled - xpp.r4464 - * Jump to zaptel-1.2.19 and zaptel-1.4.4 (with/without bristuff) - * BRI improvement: an 'nt_keepalive' parameter to xpd_bri forces - a BRI_NT to retry a connection indefinitely (this is our default). - When false it revert to the behaviour in changeset:4415 ("Bezeq like") - * Improvement in DBG macros. The print_dbg parameter is now set of - flags to debug. They are defined in zap_debug.h - * PRI configuration improvements (r4462): - - Hardcoded default (in init_card_9_26) is TE. - - The variable XPP_PRI_SETUP (in /etc/default/zaptel) may config - all PRI ports or some of them as we wish. Full docs are in - the utils/example_default_zaptel. - * PRI D-channel indication: Similar to BRI (r4464). - -Thu Jul 30 2007 Oron Peled - xpp.r4415 - * Show Astribank 6+2 as 6/2 channels and not 8/8 channels. - - Added as a "subtype" to the device type (r4391). - * Fixed a panic in BRI span shutdown method (r4393). - * Changes to debug macros. - * Add proper sysfs support (r4406) - - A bus on whuch all of the Astribanks reside. - - Replaces useless sysfs code that existed in the module. - - Currently used to set the sync source automatically at device - adition / removal. - * BRI: We do need the T1 timer in NT. If it gets into G2 state (rr4407). - -Thu Jul 12 2007 Oron Peled - xpp.r4372 - * Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward) - * Fix a critical race with zaptel synchronization (r4362) - * Added a /proc/xpp/cmds for statistics about command timing (r4360) - * Fix a digit mapping bug with hardware dtmf detection (r4357) - * In xpp/utils/Makefile add perl syntax checks to our scripts (r4337) - * Better USB data error checking (r4336) - * udev rules (xpp.rules) avoid false calls from wrong nodes (r4331) - * Improve hardware detection and reporting in lszaptel, - zaptel_hardware. zapconf is basically functional. - * Leds are blinked synchronously on all Astribanks now (r4262) - * Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258) - (This feature was not yet accepted into official zaptel) - * Removed compile warning about HZ != 1000 (r4218) - * Firmware updates. - * xpd_pri: the PRI module - * fpga_load now supports USB pathes without zeros (r4211) - * XPD numbers have changed to '' (r4196) - * Proper support for ZT_VMWI ioctl, if used in zaptel (r4092) - * Fix FXO power denial detection (r4054) - * FXO could accidentally go off-hook with some compilers (r4048) - -Tue May 1 2007 Oron Peled - xpp.r3898 - * Tested with zaptel-1.2.17.1 - * Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info - * Adjust output of xpp_sync script. Pad for 8 port BRI. - * Added a debugging module parport_debug (not compiled by default). - * Added an optional patch to zaptel: - - compiles only if ZAPTEL_SYNC_TICK is defined - - Allow interested driver to register for "sync" notification. - - Does not affect drivers that do not use this feature. - * Added external synchronization feature: - - Only if ZAPTEL_SYNC_TICK feature is compiled in - - Than XPP may be synchronized by another card (e.g: an Astribank - with FXS can be synchronized by a Digium PRI card). - - May be enabled/disabled in runtime via the 'sync_tick_active' module - parameter to the xpp.ko module. - * Fixed a potential bug in D-Channel hexdump printing. - * New visual indications in BRI leds: - - Constant ON RED/GREEN: Shows the port type -- NT/TE. - - Very fast "double blink": Layer1 work, no D-Channel yet. - - Steady blinking (1/2 sec): D-Channel trafic detected. - * xpp_fxloader moved to /usr/share/zaptel . - * adj_clock removed: never really used. - -Thu, 19 Apr 2007 Tzafrir Cohen - xpp.r3814 - * No need for extra patch beyond bristuff for Astribank BRI. - * Protocol no. 2.6: syncing improvements. - * Default poll intervals changed: 500 in BRI and FXO. - * Allow changing FXS polls interval at run time. - * BRI initalization fixed on SUSE (path to logger). - * When using the SUSE zaptel rpm package, set modules_var=ZAPTEL_MODULES in - /etc/sysconfig/zaptel . - * zt_registration not verbose by default. - * xpp_sync warns if FXO is sync slave. - * Extra PCM metrics data in /proc/xpp/XBUS-NN/summary . - * Extra USB metrics data in /proc/xpp/XBUS-NN/usb_info . - -Wed, 11 Apr 2007 Tzafrir Cohen - xpp.r3768 - * Removed "go away" notice and solved sync of a restarted device. - * Resetting firmware: rmmod xpp_usb; /etc/hotplug/usb/xpp_fxloader reset - * Perl modules use strict. - * genzaptelconf -F will not generate zapata configuration for NT spans. - * genzaptelconf uses perl utilities to start. - * Initial support for 2nd XHFC (BRI) chip. - -Sun, 1 Apr 2007 Tzafrir Cohen - xpp.r3712 - * New protocol version (2.5). - * Luckily firmware unloading now works. - * Solves "multiple ticks" bug. No need for pcm_tasklets workaround. - * genzaptelconf -z will generate zapscan.conf for the asterisk-gui. - * Fixed hardware detection for the BRI. - -Wed, 14 Mar 2007 Tzafrir Cohen - xpp.r3608 - * Initial verssion of firmware unloading. - * PCM bugfixes. - * Defaults of kernel parameters are now part of parameter description. - * Removed zaptel sync code for now. - * genzaptelconf will detect vzaphfc. - * genzaptelconf defaults to ptmp for BRI. - * Documentation updates. - -Mon, 26 Feb 2007 Tzafrir Cohen - xpp.r3517 - * genzaptelconf now uses ls for FXS lines by default . - * World-readable kernel parameters. - -Thu, 22 Feb 2007 Tzafrir Cohen - xpp.r3440 - * /proc/xpp/sync: 'm 0' is, while depracated, can still be used. - * New firmware with PCM improvements. - * Improvements to the xpp helper scripts. - * Bug fixes. - * zaptel/perl is now installed by xpp/utils/Makefile. - -Wed, 14 Feb 2007 Tzafrir Cohen - xpp.r3365 - * Kewlstart support on the FXS ports (already existed on the FXO ports). - * The format of /proc/xpp/sync has changed (still self-documented). - * Better notification of FXS lines that were off-hook on registration time. - * Parallel polling of Astribanks (faster startup when there are multiple - devices) - * zconf: scripts and perl modules to automate the work with Zaptel and the - Astribank. Current scripts: zt_registration, xpp_sync. +Thu, Aug 14 2008 Oron Peled - xpp.r6056 + * First DAHDI-linux release. -- cgit v1.2.3