diff options
Diffstat (limited to 'pjlib/include/pj/file_io.h')
-rw-r--r-- | pjlib/include/pj/file_io.h | 344 |
1 files changed, 172 insertions, 172 deletions
diff --git a/pjlib/include/pj/file_io.h b/pjlib/include/pj/file_io.h index e66c2cc3..ea0e207c 100644 --- a/pjlib/include/pj/file_io.h +++ b/pjlib/include/pj/file_io.h @@ -1,172 +1,172 @@ -/* $Id$ */
-/*
- * Copyright (C)2003-2006 Benny Prijono <benny@prijono.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __PJ_FILE_IO_H__
-#define __PJ_FILE_IO_H__
-
-/**
- * @file file_io.h
- * @brief Simple file I/O abstraction.
- */
-#include <pj/types.h>
-
-PJ_BEGIN_DECL
-
-/**
- * @defgroup PJ_FILE_IO File I/O
- * @ingroup PJ_IO
- * @{
- *
- * This file contains functionalities to perform file I/O. The file
- * I/O can be implemented with various back-end, either using native
- * file API or ANSI stream.
- *
- * @section pj_file_size_limit_sec Size Limits
- *
- * There may be limitation on the size that can be handled by the
- * #pj_file_setpos() or #pj_file_getpos() functions. The API itself
- * uses 64-bit integer for the file offset/position (where available);
- * however some backends (such as ANSI) may only support signed 32-bit
- * offset resolution.
- *
- * Reading and writing operation uses signed 32-bit integer to indicate
- * the size.
- *
- *
- */
-
-/**
- * These enumerations are used when opening file. Values PJ_O_RDONLY,
- * PJ_O_WRONLY, and PJ_O_RDWR are mutually exclusive. Value PJ_O_APPEND
- * can only be used when the file is opened for writing.
- */
-enum pj_file_access
-{
- PJ_O_RDONLY = 0x1101, /**< Open file for reading. */
- PJ_O_WRONLY = 0x1102, /**< Open file for writing. */
- PJ_O_RDWR = 0x1103, /**< Open file for reading and writing.
- File will be truncated. */
- PJ_O_APPEND = 0x1108, /**< Append to existing file. */
-};
-
-/**
- * The seek directive when setting the file position with #pj_file_setpos.
- */
-enum pj_file_seek_type
-{
- PJ_SEEK_SET = 0x1201, /**< Offset from beginning of the file. */
- PJ_SEEK_CUR = 0x1202, /**< Offset from current position. */
- PJ_SEEK_END = 0x1203, /**< Size of the file plus offset. */
-};
-
-/**
- * Open the file as specified in \c pathname with the specified
- * mode, and return the handle in \c fd. All files will be opened
- * as binary.
- *
- * @param pool Pool to allocate memory for the new file descriptor.
- * @param pathname The file name to open.
- * @param flags Open flags, which is bitmask combination of
- * #pj_file_access enum. The flag must be either
- * PJ_O_RDONLY, PJ_O_WRONLY, or PJ_O_RDWR. When file
- * writing is specified, existing file will be
- * truncated unless PJ_O_APPEND is specified.
- * @param fd The returned descriptor.
- *
- * @return PJ_SUCCESS or the appropriate error code on error.
- */
-PJ_DECL(pj_status_t) pj_file_open(pj_pool_t *pool,
- const char *pathname,
- unsigned flags,
- pj_oshandle_t *fd);
-
-/**
- * Close an opened file descriptor.
- *
- * @param fd The file descriptor.
- *
- * @return PJ_SUCCESS or the appropriate error code on error.
- */
-PJ_DECL(pj_status_t) pj_file_close(pj_oshandle_t fd);
-
-/**
- * Write data with the specified size to an opened file.
- *
- * @param fd The file descriptor.
- * @param data Data to be written to the file.
- * @param size On input, specifies the size of data to be written.
- * On return, it contains the number of data actually
- * written to the file.
- *
- * @return PJ_SUCCESS or the appropriate error code on error.
- */
-PJ_DECL(pj_status_t) pj_file_write(pj_oshandle_t fd,
- const void *data,
- pj_ssize_t *size);
-
-/**
- * Read data from the specified file. When end-of-file condition is set,
- * this function will return PJ_SUCCESS but the size will contain zero.
- *
- * @param fd The file descriptor.
- * @param data Pointer to buffer to receive the data.
- * @param size On input, specifies the maximum number of data to
- * read from the file. On output, it contains the size
- * of data actually read from the file. It will contain
- * zero when EOF occurs.
- *
- * @return PJ_SUCCESS or the appropriate error code on error.
- * When EOF occurs, the return is PJ_SUCCESS but size
- * will report zero.
- */
-PJ_DECL(pj_status_t) pj_file_read(pj_oshandle_t fd,
- void *data,
- pj_ssize_t *size);
-
-/**
- * Set file position to new offset according to directive \c whence.
- *
- * @param fd The file descriptor.
- * @param offset The new file position to set.
- * @param whence The directive.
- *
- * @return PJ_SUCCESS or the appropriate error code on error.
- */
-PJ_DECL(pj_status_t) pj_file_setpos(pj_oshandle_t fd,
- pj_off_t offset,
- enum pj_file_seek_type whence);
-
-/**
- * Get current file position.
- *
- * @param fd The file descriptor.
- * @param pos On return contains the file position as measured
- * from the beginning of the file.
- *
- * @return PJ_SUCCESS or the appropriate error code on error.
- */
-PJ_DECL(pj_status_t) pj_file_getpos(pj_oshandle_t fd,
- pj_off_t *pos);
-
-/** @} */
-
-
-PJ_END_DECL
-
-#endif /* __PJ_FILE_IO_H__ */
-
+/* $Id$ */ +/* + * Copyright (C)2003-2006 Benny Prijono <benny@prijono.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __PJ_FILE_IO_H__ +#define __PJ_FILE_IO_H__ + +/** + * @file file_io.h + * @brief Simple file I/O abstraction. + */ +#include <pj/types.h> + +PJ_BEGIN_DECL + +/** + * @defgroup PJ_FILE_IO File I/O + * @ingroup PJ_IO + * @{ + * + * This file contains functionalities to perform file I/O. The file + * I/O can be implemented with various back-end, either using native + * file API or ANSI stream. + * + * @section pj_file_size_limit_sec Size Limits + * + * There may be limitation on the size that can be handled by the + * #pj_file_setpos() or #pj_file_getpos() functions. The API itself + * uses 64-bit integer for the file offset/position (where available); + * however some backends (such as ANSI) may only support signed 32-bit + * offset resolution. + * + * Reading and writing operation uses signed 32-bit integer to indicate + * the size. + * + * + */ + +/** + * These enumerations are used when opening file. Values PJ_O_RDONLY, + * PJ_O_WRONLY, and PJ_O_RDWR are mutually exclusive. Value PJ_O_APPEND + * can only be used when the file is opened for writing. + */ +enum pj_file_access +{ + PJ_O_RDONLY = 0x1101, /**< Open file for reading. */ + PJ_O_WRONLY = 0x1102, /**< Open file for writing. */ + PJ_O_RDWR = 0x1103, /**< Open file for reading and writing. + File will be truncated. */ + PJ_O_APPEND = 0x1108, /**< Append to existing file. */ +}; + +/** + * The seek directive when setting the file position with #pj_file_setpos. + */ +enum pj_file_seek_type +{ + PJ_SEEK_SET = 0x1201, /**< Offset from beginning of the file. */ + PJ_SEEK_CUR = 0x1202, /**< Offset from current position. */ + PJ_SEEK_END = 0x1203, /**< Size of the file plus offset. */ +}; + +/** + * Open the file as specified in \c pathname with the specified + * mode, and return the handle in \c fd. All files will be opened + * as binary. + * + * @param pool Pool to allocate memory for the new file descriptor. + * @param pathname The file name to open. + * @param flags Open flags, which is bitmask combination of + * #pj_file_access enum. The flag must be either + * PJ_O_RDONLY, PJ_O_WRONLY, or PJ_O_RDWR. When file + * writing is specified, existing file will be + * truncated unless PJ_O_APPEND is specified. + * @param fd The returned descriptor. + * + * @return PJ_SUCCESS or the appropriate error code on error. + */ +PJ_DECL(pj_status_t) pj_file_open(pj_pool_t *pool, + const char *pathname, + unsigned flags, + pj_oshandle_t *fd); + +/** + * Close an opened file descriptor. + * + * @param fd The file descriptor. + * + * @return PJ_SUCCESS or the appropriate error code on error. + */ +PJ_DECL(pj_status_t) pj_file_close(pj_oshandle_t fd); + +/** + * Write data with the specified size to an opened file. + * + * @param fd The file descriptor. + * @param data Data to be written to the file. + * @param size On input, specifies the size of data to be written. + * On return, it contains the number of data actually + * written to the file. + * + * @return PJ_SUCCESS or the appropriate error code on error. + */ +PJ_DECL(pj_status_t) pj_file_write(pj_oshandle_t fd, + const void *data, + pj_ssize_t *size); + +/** + * Read data from the specified file. When end-of-file condition is set, + * this function will return PJ_SUCCESS but the size will contain zero. + * + * @param fd The file descriptor. + * @param data Pointer to buffer to receive the data. + * @param size On input, specifies the maximum number of data to + * read from the file. On output, it contains the size + * of data actually read from the file. It will contain + * zero when EOF occurs. + * + * @return PJ_SUCCESS or the appropriate error code on error. + * When EOF occurs, the return is PJ_SUCCESS but size + * will report zero. + */ +PJ_DECL(pj_status_t) pj_file_read(pj_oshandle_t fd, + void *data, + pj_ssize_t *size); + +/** + * Set file position to new offset according to directive \c whence. + * + * @param fd The file descriptor. + * @param offset The new file position to set. + * @param whence The directive. + * + * @return PJ_SUCCESS or the appropriate error code on error. + */ +PJ_DECL(pj_status_t) pj_file_setpos(pj_oshandle_t fd, + pj_off_t offset, + enum pj_file_seek_type whence); + +/** + * Get current file position. + * + * @param fd The file descriptor. + * @param pos On return contains the file position as measured + * from the beginning of the file. + * + * @return PJ_SUCCESS or the appropriate error code on error. + */ +PJ_DECL(pj_status_t) pj_file_getpos(pj_oshandle_t fd, + pj_off_t *pos); + +/** @} */ + + +PJ_END_DECL + +#endif /* __PJ_FILE_IO_H__ */ + |