From 18c6813f2c788b603dab363b9138d65d24252167 Mon Sep 17 00:00:00 2001
From: tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb>
Date: Wed, 27 May 2009 10:01:24 +0000
Subject: Big dump of newer xpp code.

For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.

xpp.r7150

* 116x Astribanks:
 - Support for the TwinStar capability and for FXO and (BRI|PRI) on
   same device.
 - New control protocol ("MPP").
 - astribank_hextool - a low-level firmware loading tool instead of
   fpga_load .
 - astribank_tool - Other MPP activities .
 - Can still reset (but just that) through older protocol.
 - astribank_hexload is required for loading FPGA firmware for USB_FW.hex
   rev > 6885.
 - USB_FW rev. 7071 .
 - More modular FPGA firmware (1161 only).
 - FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
 - software-settings of some capabilities with astribank_allow .

* XPP:
  - init_card_* script are less verbose.
  - Reduced rate of "Is a DAHDI sync master" message.
  - Replace member bus_id with dev_name() and set_dev_name() for
    building with 2.6.30.
  - Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
  - astribank_hook now enabled by default.
  - Has an optional hook for TwinStar.

* BRI:
  - hardhdlc support: The bri_dchan patch is no longer needed.
  - If bri_dchan patch applied: old code is used, and "dchan" is used.
  - If not: new code and "hardhdlc" is used.
  - zapconf will generate the right configuration, depending on the new
    sysfs driver attribute bri_hardhdlc, but default to "dchan" as
    before if not explicitly told.
  - Bugfix: explicitly turn off leds on startup.

* FXS:
  - Initialization and calibration fixes.
  - Notify the user just one about wrong VMWI config

* Dahdi-perl:
  - Fix detection of empty slots in wctdm.
  - Fix working with ethmf's extra file in /proc/zaptel
  - Improved detection of Rhino cards.
  - dahdi_genconf's generated text better explains files are generated.
  - /etc/xpp_order - allow specifiying an explicit order for
    Astribanks to register with Zaptel.
  - Dahdi::Xpp::Mpp - A wrapper around astribank_tool .

* dahdi.init:
  - A separate waitfor_xpds script. May now have a wait-loop in
    some cases.
  - xpp_sync needs to only be called after dahdi_cfg .
    (for the PRI module).



git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb
---
 kernel/xpp/utils/debug.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 kernel/xpp/utils/debug.c

(limited to 'kernel/xpp/utils/debug.c')

diff --git a/kernel/xpp/utils/debug.c b/kernel/xpp/utils/debug.c
new file mode 100644
index 0000000..f188a2d
--- /dev/null
+++ b/kernel/xpp/utils/debug.c
@@ -0,0 +1,53 @@
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2008, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <syslog.h>
+#include "debug.h"
+
+int	verbose = LOG_DEBUG;
+int	debug_mask = 0;
+
+void log_function(int level, int mask, const char *msg, ...)
+{
+	va_list ap;
+
+	va_start(ap, msg);
+	if(verbose >= level) {
+		if(level < LOG_DEBUG || (mask & debug_mask))
+			vfprintf(stderr, msg, ap);
+	}
+	va_end(ap);
+}
+
+void dump_packet(int loglevel, const char *msg, const char *buf, int len)
+{
+	int	i;
+
+	log_function(loglevel, ~0, "%-15s:", msg);
+	for(i = 0; i < len; i++)
+		log_function(loglevel, ~0, " %02X", (uint8_t)buf[i]);
+	log_function(loglevel, ~0, "\n");
+}
+
-- 
cgit v1.2.3