PEDANTIC	= -ansi -pedantic -std=c99

INSTALL		= install
INSTALL_DATA	= install -m 644

#
# Ugly hack to find kernel directories before/after the split
# to kernel/user-space.
#
# These variables should be passed to us. But until then...
#
ZAPTEL_DIR	?= $(shell if [ -f "../../zaptel.h" ]; then echo "../.."; else echo "../../.."; fi)
ZAP_KERNEL	?= $(shell if [ -d "$(ZAPTEL_DIR)/kernel" ]; then echo "$(ZAPTEL_DIR)/kernel"; else echo "$(ZAPTEL_DIR)"; fi)

-include $(ZAPTEL_DIR)/makeopts

INSTALL_DATA	= $(INSTALL) -m 644

# In 1.4 those are provided by autoconf through makeopts
prefix		?= /usr
datadir		?= $(prefix)/share
mandir		?= $(datadir)/man
INSTALL		?= install

INSTALL_DATA	= $(INSTALL) -m 644

SBINDIR		= $(prefix)/sbin
DATADIR		= $(datadir)/zaptel
MANDIR		= $(mandir)/man8
HOTPLUG_USB_DIR	= /etc/hotplug/usb
UDEV_RULES_DIR	= /etc/udev/rules.d
PERLLIBDIR	:= $(shell eval `perl -V:sitelib`; echo "$$sitelib")
PERL_DIRS	:= $(shell cd zconf; find * -name '[A-Z]*' -type d| xargs)
PERL_MODS_PAT	:= *.pm $(PERL_DIRS:%=%/*.pm)
PERL_MODS	:= $(shell cd zconf; echo $(PERL_MODS_PAT))

XPD_FIRMWARE	= $(wildcard ../firmwares/*.hex)
XPD_INIT_DATA	= $(XPD_FIRMWARE) init_fxo_modes ../XppConfig.pm 
XPD_INIT	= $(wildcard ../init_card_?_*) xpp_fxloader waitfor_xpds zaptel_drivers

# Variables that should be defined above, but need sane defaults:
# FIXME: Are those values really sane?
HOSTCC		?= $(CC)

ifeq	(,$(PBX_LIBUSB))
# No PBX_LIBUSB? Maybe we compile against zaptel-1.2
# Let's make a poor man detection of libusb
PBX_LIBUSB	= $(shell if [ -r /usr/include/usb.h ]; then echo 1; else echo 0; fi)
endif

WCTDM=$(shell for i in $(ZAP_KERNEL)/wctdm.c $(ZAP_KERNEL)/fxo_modes.h fxo_modes.h; do [ -f "$$i" ] && echo "$$i"; done)

CFLAGS		= -g -Wall $(EXTRA_CFLAGS)

%.8: %
	pod2man --section 8 $^ > $@ || $(RM) $@
PERL_SCRIPTS	=	\
		zt_registration	\
		xpp_sync	\
		lszaptel	\
		xpp_blink	\
		zapconf		\
		zaptel_hardware	\
		#

PERL_MANS	= $(PERL_SCRIPTS:%=%.8)

ABHEXLOAD_OBJS		= astribank_hexload.o hexfile.o pic_loader.o astribank_usb.o mpp_funcs.o debug.o
ABTOOL_OBJS		= astribank_tool.o astribank_usb.o mpp_funcs.o debug.o
ABALLOW_OBJS		= astribank_allow.o astribank_usb.o mpp_funcs.o debug.o

TARGETS	= init_fxo_modes print_modes .perlcheck
PROG_INSTALL	= genzaptelconf
MAN_INSTALL	= $(PROG_INSTALL:%=%.8)
ifeq	(1,$(PBX_LIBUSB))
TARGETS	+= fpga_load		\
	   astribank_tool	\
	   astribank_hexload	\
	   astribank_allow	\
	   test_parse
PROG_INSTALL	+= fpga_load astribank_tool astribank_hexload
endif
ifneq	(,$(PERLLIBDIR))
PROG_INSTALL	+= $(PERL_SCRIPTS)
TARGETS		+= $(PERL_MANS)
endif

all: $(TARGETS)

docs: $(PERL_MANS)

install: all
	$(INSTALL) -d $(DESTDIR)$(SBINDIR)
	$(INSTALL) $(PROG_INSTALL) $(DESTDIR)$(SBINDIR)/
	$(INSTALL) -d $(DESTDIR)$(DATADIR)
	$(INSTALL_DATA) $(XPD_INIT_DATA) $(DESTDIR)$(DATADIR)/
	$(INSTALL) $(XPD_INIT) $(DESTDIR)$(DATADIR)/
	$(INSTALL) -d $(DESTDIR)$(MANDIR)
	$(INSTALL_DATA) $(MAN_INSTALL) $(DESTDIR)$(MANDIR)/
	$(INSTALL) -d $(DESTDIR)$(HOTPLUG_USB_DIR)
	$(INSTALL_DATA) xpp_fxloader.usermap $(DESTDIR)$(HOTPLUG_USB_DIR)/
	# for backward compatibility and for hotplug users:
	ln -sf $(DATADIR)/xpp_fxloader $(DESTDIR)$(HOTPLUG_USB_DIR)/
	$(INSTALL) -d $(DESTDIR)$(UDEV_RULES_DIR)
	$(INSTALL_DATA) xpp.rules $(DESTDIR)$(UDEV_RULES_DIR)/
ifneq	(,$(PERLLIBDIR))
	$(INSTALL) -d $(DESTDIR)$(PERLLIBDIR)
	for i in $(PERL_DIRS); \
	do \
		$(INSTALL) -d "$(DESTDIR)$(PERLLIBDIR)/$$i"; \
	done
	for i in $(PERL_MODS); \
	do \
		$(INSTALL_DATA) "zconf/$$i" "$(DESTDIR)$(PERLLIBDIR)/$$i"; \
	done
endif

fpga_load: fpga_load.o hexfile.o
	$(CC) -L. -o $@ $^ $(EXTRA_LIBS) -lusb

astribank_hexload: $(ABHEXLOAD_OBJS)
	$(CC) -L. -o $@ $(ABHEXLOAD_OBJS) $(EXTRA_LIBS) -lusb

astribank_tool: $(ABTOOL_OBJS)
	$(CC) -L. -o $@ $(ABTOOL_OBJS) $(EXTRA_LIBS) -lusb

astribank_allow: $(ABALLOW_OBJS)
	$(CC) -L. -o $@ $(ABALLOW_OBJS) $(EXTRA_LIBS) -lusb

fpga_load.o: CFLAGS+=-D_GNU_SOURCE	# We use memrchr()

test_parse: test_parse.o hexfile.o
	$(CC) -L. -o $@ $^ $(EXTRA_LIBS) -lusb

print_modes: print_modes.c wctdm_fxomodes.h
	$(HOSTCC) -o $@ $(CFLAGS) $<

wctdm_fxomodes.h: $(WCTDM)
	@if [ "$(WCTDM)" = "" ]; then echo 1>&2 "WCTDM is not defined. Aborting."; exit 1; fi
	@echo Building FXO modes from: $(WCTDM)
	perl -n -e 'print if (/^static struct fxo_mode {$$/ .. /};$$/)' $(WCTDM) >$@ || rm -f $@

init_fxo_modes: print_modes
	./$< >$@

.perlcheck: $(PERL_SCRIPTS)
	for i in $^; do perl -I./zconf -c $$i || exit 1; done
	touch $@

clean:
	$(RM) .depend *.o $(TARGETS)

.PHONY: depend
depend: .depend
.depend: *.c *.h wctdm_fxomodes.h
	@$(CC) -MM *.c > $@ || rm -f $@

include .depend