| Age | Commit message (Collapse) | Author |
|---|
|
The bridge frame queue functions need to return an error status if the
frame failed to be queued because of an error condition. The main calls
that needed to return the status are:
ast_bridge_channel_queue_action_data() and
ast_bridge_channel_write_action_data(). The other return changes are
ripple effects.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This pulls bridge-related CEL event triggers out of the code in which
they were residing and pulls them into cel.c where they are now
triggered by changes in bridge snapshots. To get access to the
Stasis-Core parking topic in cel.c, the Stasis-Core portions of parking
init have been pulled into core Asterisk init.
This also adds a new CEL event (AST_CEL_BRIDGE_TO_CONF) that indicates
a two-party bridge has transitioned to a multi-party conference. The
reverse cannot occur in CEL terms even though it may occur in actuality
and two party bridges which receive a AST_CEL_BRIDGE_TO_CONF will be
treated as multi-party conferences for the duration of the bridge.
Review: https://reviewboard.asterisk.org/r/2563/
(closes issue ASTERISK-21564)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue ASTERISK-21645)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2545/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
bridging core.
* The channel variable ATTENDED_TRANSFER_COMPLETE_SOUND is no longer
channel driver specific. If the channel variable is set on the
transferrer channel, the sound will be played to the target of an attended
transfer.
* The channel variable BRIDGEPEER becomes a comma separated list of peers
in a multi-party bridge. The BRIDGEPEER value can have a maximum of 10
peers listed. Any more peers in the bridge will not be included in the
list. BRIDGEPEER is not valid in holding bridges like parking since those
channels do not talk to each other even though they are in a bridge.
* The channel variable BRIDGEPVTCALLID is only valid for two party bridges
and will contain a value if the BRIDGEPEER's channel driver supports it.
* The channel variable DYNAMIC_PEERNAME is redundant with BRIDGEPEER and
is removed. The more useful DYNAMIC_WHO_ACTIVATED gives the channel name
that activated the dynamic feature.
* The channel variables DYNAMIC_FEATURENAME and DYNAMIC_WHO_ACTIVATED are
set only on the channel executing the dynamic feature. Executing a
dynamic feature on the bridge peer in a multi-party bridge will execute it
on all peers of the activating channel.
(closes issue ASTERISK-21555)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Rename some hook flag parameters to remove_flags.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
masquerades.
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Way back when in the dark days of Asterisk 1.8.9, blind transferring a call
in a context that included the 'h' extension would inadvertently execute the
hangup code logic on the transferred channel. This was a "bad thing". The fix
was to properly check for the softhangup flags on the channel and only execute
the 'h' extension logic (and, in later versions, hangup handler logic) if the
channel was well and truly dead (Jim).
Unfortunately, CDRs are fickle. Setting the softhangup flag when we detected
that the channel was leaving the bridge (but not to die) caused some crucial
snippet of CDR code, lying in ambush in the middle of the bridging code, to
not get executed. This had the effect of blowing away one of the CDRs that is
typically created during a blind transfer.
While we live and die by the adage "don't touch CDRs in release branches", this
was our bad. The attached patch restores the CDR behavior, and still manages to
not run the 'h' extension during a blind transfer (at least not when it's
supposed to).
Thanks to Steve Davies for diagnosing this and providing a fix.
Review: https://reviewboard.asterisk.org/r/2476
(closes issue ASTERISK-21394)
Reported by: Ishfaq Malik
Tested by: Ishfaq Malik, mjordan
patches:
fix_missing_blindXfer_cdr2 uploaded by one47 (License 5012)
........
Merged revisions 387036 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387038 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch cleans up two things features:
* It properly unregisters the CLI commands that features registered
* It cancels and performs a pthread_join on the created parking thread. This
not only properly joins a non-detached thread, but also prevents disposing
of the parking lots prior to the parking thread completely exiting.
(closes issue ASTERISK-21407)
Reported by: Corey Farrell
patches:
features_shutdown-r2.patch uploaded by Corey Farrell (License 5909)
........
Merged revisions 386641 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 386642 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
protected by the features_lock.
* Made all calls to ast_find_call_feature() have the features_lock held.
* Fixed set_config_flags() to actually use find_group() to look for
feature groups in DYNAMIC_FEATURES. The code originally assumed all
feature groups were listed in DYNAMIC_FEATURES.
* Make everyone use ast_rdlock_call_features(),
ast_unlock_call_features(), and new ast_wrlock_call_features() instead of
directly calling the rwlock API on features_lock.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Because "struct feature_ds *feature_ds" is not a good thing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The settings saved on the channel for FEATURE()/FEATUREMAP() were only
for that channel. This patch adds the ability to have these settings
inherited to child channels if you set FEATURE(inherit)=yes.
Closes issue ASTERISK-21306.
Review: https://reviewboard.asterisk.org/r/2415/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch does the following:
* A new Stasis payload has been defined for multi-channel messages. This
payload can store multiple ast_channel_snapshot objects along with a single
JSON blob. The payload object itself is opaque; the snapshots are stored
in a container keyed by roles. APIs have been provided to query for and
retrieve the snapshots from the payload object.
* The Dial AMI events have been refactored onto Stasis. This includes dial
messages in app_dial, as well as the core dialing framework. The AMI events
have been modified to send out a DialBegin/DialEnd events, as opposed to
the subevent type that was previously used.
* Stasis messages, types, and other objects related to channels have been
placed in their own file, stasis_channels. Unit tests for some of these
objects/messages have also been written.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The incorrect callid was being written to the "data1" field in queue_log table
for transfer events. The callid of the queue was being written instead of the
transfer target's callid. This now gets the correct "transfer to" number and
places that in the "data1" field of the queue_log table when a transfer event
is triggered.
(closes issue ASTERISK-19960)
Reported by: vladimir shmagin
........
Merged revisions 381770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 381791 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
It doesn't hurt to check AST_SOFTHANGUP_UNBRIDGE either, but it should not
be set outside of a bridge.
(issue ASTERISK-20492)
........
Merged revisions 381466 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 381467 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Caching a struct ast_app pointer is not a good idea because someone could
unload the application. After the applicaiton unload the cached ast_app
pointer is no longer valid. Only pbx.c can cache the pointer because it
knows when the application is unloaded and removes the pointer.
* Fixed one-touch Monitor and MixMonitor to not cache the ast_app pointer
and not use the silly monitor_ok/mixmonitor_ok/stopmixmonitor_ok flags.
* Extracted bridge_check_monitor() from ast_bridge_call() and use propper
locking.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
These two variables were previously not being set when comebacktoorigin=yes
and the example configs seemed to imply that they should be. Since there
is no harm in this and since calls that are sent back to origin are capable
of continuing in the dialplan, this seemed like a no-brainer. Also it
supports some bridging tests I've been working on.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A regression was introduced which removed automatic fallback behavior from
the PBX. This behavior was used by call parking (or at least documented as
how the feature works) in order to select an extension when the flat channel
extension wasn't available from the comebackcontext. Parking now handles
the fallbacks internally in order to keep behavior matching with how it is
documented.
(closes issue ASTERISK-20716)
Reported by: Chris Gentle
Review: https://reviewboard.asterisk.org/r/2296/
........
Merged revisions 380348 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380349 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The AMI redirect action can fail to redirect two channels that are bridged
together. There is a race between the AMI thread redirecting the two
channels and the bridge thread noticing that a channel is hungup from the
redirects.
* Made the bridge wait for both channels to be redirected before exiting.
* Made the AMI redirect check that all required headers are present before
proceeding with the redirection.
* Made the AMI redirect require that any supplied ExtraChannel exist
before proceeding. Previously the code fell back to a single channel
redirect operation.
(closes issue ASTERISK-18975)
Reported by: Ben Klang
(closes issue ASTERISK-19948)
Reported by: Brent Dalgleish
Patches:
jira_asterisk_19948_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett, Thomas Sevestre, Deepak Lohani, Kayode
Review: https://reviewboard.asterisk.org/r/2243/
........
Merged revisions 378356 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378358 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378374 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378321 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
BRIDGE_FEATURES did not previously support the automixmonitor feature. Now it
does. In addition, the BRIDGE_FEATURES variable would not apply features to
the proper party based on whether the feature option letter was in caps or
in lowercase (both ways would apply it to the caller). Now uppercase applies
to the caller while lowercase applies to the callee (like with the dial option)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Currently, the buffer for the dynamic features list is set to a fixed size of
128. If the list is bigger than that, it results in the dynamic feature(s) not
being recognized.
This patch changes the buffer from a fixed size to a dynamic one.
(closes issue ASTERISK-20680)
Reported by: Clod Patry
Tested by: Michael L. Young
Patches:
asterisk-20680-dynamic-features-v2.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2221/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a bridge is broken by an AMI Redirect action or the ChannelRedirect
application, an in progress DTMF digit could be stuck sending forever.
* Made simulate a DTMF end event when a bridge is broken and a DTMF digit
was in progress.
(closes issue ASTERISK-20492)
Reported by: Jeremiah Gowdy
Patches:
bridge_end_dtmf-v3.patch.txt (license #6358) patch uploaded by Jeremiah Gowdy
Modified to jira_asterisk_20492_v1.8.patch
jira_asterisk_20492_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2169/
........
Merged revisions 375964 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375965 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375966 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375967 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a channel uses the Park appliation to park itself with the 'r'
option, the channel hears music-on-hold instead of the requested ringing.
* Added a missing check for the 'r' option when a channel parks itself.
(closes issue ASTERISK-19382)
Reported by: James Stocks
Patches by: dsessions
Review: https://reviewboard.asterisk.org/r/2148/
........
Merged revisions 375388 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375389 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375390 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375391 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Update and extend the configuration_file group and enable linking. Commit other cleanups from multi-version Doxygen testing. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch resolves a number of ref leaks that occur primarily on Asterisk
shutdown. It adds a variety of shutdown routines to core portions of
Asterisk such that they can reclaim resources allocate duringd initialization.
Review: https://reviewboard.asterisk.org/r/2137
........
Merged revisions 374177 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374178 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374196 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* ASTERISK-20383
Missing named call pickup group features:
CHANNEL(callgroup) - Need CHANNEL(namedcallgroup)
CHANNEL(pickupgroup) - Need CHANNEL(namedpickupgroup)
Pickup() - Needs to also select from named pickup groups.
* ASTERISK-20384
Using the pickupexten, the pickup channel selection could fail even though
there was a call it could have picked up. In a call pickup race when
there are multiple calls to pickup and two extensions try to pickup a
call, it is conceivable that the loser will not pick up any call even
though it could have picked up the next oldest matching call.
Regression because of the named call pickup group feature.
* See ASTERISK-20386 for the implementation improvements. These are the
changes in channel.c and channel.h.
* Fixed some locking issues in CHANNEL().
(closes issue ASTERISK-20383)
Reported by: rmudgett
(closes issue ASTERISK-20384)
Reported by: rmudgett
(closes issue ASTERISK-20386)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2112/
........
Merged revisions 373220 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When channels get bridged due to an AMI bridge action
or a DTMF attended transfer, the two channels that
get bridged have their application data pointing to
the other channel's name. This means that if one channel
is hung up but the other moves on, it means that the
channel that moves on will have its application data
pointing at freed memory.
(issue ASTERISK-20335)
Reported by: aragon
........
Merged revisions 372840 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372841 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372886 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds the feature "Private representation of caller, connected
and redirecting party ids", as previously discussed with us (DATUS) and
Digium.
1. Feature motivation
Until now it is quite difficult to modify a party number or name which can
only be seen by exactly one particular instantiated technology channel
subscriber. One example where a modified party number or name on one
channel is spread over several channels are supplementary services like
call transfer or pickup. To implement these features Asterisk internally
copies caller and connected ids from one channel to another. Another
example are extension subscriptions. The monitoring entities (watchers)
are notified of state changes and - if desired - of party numbers or names
which represent the involving call parties. One major feature where a
private representation of party names is essentially needed, i.e. where a
party name shall be exclusively signaled to only one particular user, is a
private user-specific name resolution for party numbers. A lookup in a
private destination-dependent telephone book shall provide party names
which cannot be seen by any other user at any time.
2. Feature Description
This feature comes along with the implementation of additional private
party id elements for caller id, connected id and redirecting ids inside
Asterisk channels.
The private party id elements can be read or set by the user using
Asterisk dialplan functions.
When a technology channel is initiating a call, receives an internal
connected-line update event, or receives an internal redirecting update
event, it merges the corresponding public id with the private id to create
an effective party id. The effective party id is then used for protocol
signaling.
The channel technologies which initially support the private id
representation with this patch are SIP (chan_sip), mISDN (chan_misdn) and
PRI (chan_dahdi).
Once a private name or number on a channel is set and (implicitly) made
valid, it is generally used for any further protocol signaling until it is
rewritten or invalidated.
To simplify the invalidation of private ids all internally generated
connected/redirecting update events and also all connected/redirecting
update events which are generated by technology channels -- receiving
regarding protocol information - automatically trigger the invalidation of
private ids.
If not using the private party id representation feature at all, i.e. if
using only the 'regular' caller-id, connected and redirecting related
functions, the current characteristic of Asterisk is not affected by the
new extended functionality.
3. User interface Description
To grant access to the private name and number representation from the
Asterisk dialplan, the CALLERID, CONNECTEDLINE and REDIRECTING dialplan
functions are extended by the following data types. The formats of these
data types are equal to the corresponding regular 'non-private' already
existing data types:
CALLERID:
priv-all
priv-name priv-name-valid priv-name-charset priv-name-pres
priv-num priv-num-valid priv-num-plan priv-num-pres
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
CONNECTEDLINE:
priv-name priv-name-valid priv-name-pres priv-name-charset
priv-num priv-num-valid priv-num-pres priv-num-plan
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
REDIRECTING:
priv-orig-name priv-orig-name-valid priv-orig-name-pres priv-orig-name-charset
priv-orig-num priv-orig-num-valid priv-orig-num-pres priv-orig-num-plan
priv-orig-subaddr priv-orig-subaddr-valid priv-orig-subaddr-type priv-orig-subaddr-odd
priv-orig-tag
priv-from-name priv-from-name-valid priv-from-name-pres priv-from-name-charset
priv-from-num priv-from-num-valid priv-from-num-pres priv-from-num-plan
priv-from-subaddr priv-from-subaddr-valid priv-from-subaddr-type priv-from-subaddr-odd
priv-from-tag
priv-to-name priv-to-name-valid priv-to-name-pres priv-to-name-charset
priv-to-num priv-to-num-valid priv-to-num-pres priv-to-num-plan
priv-to-subaddr priv-to-subaddr-valid priv-to-subaddr-type priv-to-subaddr-odd
priv-to-tag
Reported by: Thomas Arimont
Review: https://reviewboard.asterisk.org/r/2030/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
You cannot unref a pointer and then expect to ref it again later.
* Fix potential NULL pointer deref if the call pickup search fails.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This replaces all calls to alloca() with ast_alloca() which calls gcc's
__builtin_alloca() to avoid BSD semantics and removes all NULL checks
on memory allocated via ast_alloca() and ast_strdupa().
(closes issue ASTERISK-20125)
Review: https://reviewboard.asterisk.org/r/2032/
Patch-by: Walter Doekes (wdoekes)
........
Merged revisions 370642 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370643 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Because some of the manager events are defined in the top of the source, due
to the macro calls not containing all necessary information to have the
documentation colocated with the call itself, several include statements were
failing when built with 'make'. While this did not cause any problems in
compilation or validation, it did result in a number of warnings being dumped
to stderr.
This patch changes those references such that they always resolve, regardless
of the documentation build options.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds some basic documentation for a number of modules. This
includes core source files in Asterisk (those in main), as well as
chan_agent, chan_dahdi, chan_local, sig_analog, and sig_pri. The DTD
has also been updated to allow referencing of AMI commands.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Adds call ID logging changes to specific channel drivers that weren't handled
handled in phase II of Call ID Logging. Also covers logging for threads for
threads created by systems that may be involved with many different calls.
Extra special thanks to Richard for rigorous review of chan_dahdi and its
various signalling modules.
review: https://reviewboard.asterisk.org/r/1927/
review: https://reviewboard.asterisk.org/r/1950/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Fix do_bridge_masquerade() getting the resume location from the zombie
channel. The code must not touch a clone channel after it has masqueraded
it. The clone channel has become a zombie and is starting to hangup.
(closes issue ASTERISK-19985)
Reported by: jamicque
Patches:
jira_asterisk_19985_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: jamicque
........
Merged revisions 369327 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369328 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Fix AMI Bridge action disconnecting the AMI link on error.
* Fix AMI Bridge action and Bridge application not checking if their
masquerades were successful.
* Fix Bridge application running the h-exten when it should not.
* Made do_bridge_masquerade() return if the masquerade was successful so
the Bridge application and AMI Bridge action could deal with it correctly.
* Made bridge_call_thread_launch() hangup the passed in channels if the
bridge_call_thread fails to start. Those channels would have been
orphaned.
* Made builtin_atxfer() check the success of the transfer masquerade
setup.
........
Merged revisions 369282 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369283 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When the IAX2 Who Hung Up? changes were added, they uncovered a bug in
the way AST_CONTROL_PVT_CAUSE_CODE was handled in
feature_request_and_dial(). This particular frame subtype was being
treated like more terminal control frames causing the function to be
exited prematurely.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Fix a regression that was introduced by -r366167 which effectively
disabled monitoring parked calls.
(closes issue ASTERISK-20012)
Reported by: sdolloff
Tested by: rmudgett
........
Merged revisions 369043 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369044 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a parked call was retrieved from the parking lot, it could not do a
blind transfer because it caused the involved calls to be hung up
unconditionally.
* Made the ParkedCall application return the ast_bridge_call() return
value.
(closes issue ABE-2862)
Reported by: Vlad Povorozniuc
........
Merged revisions 368567 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368568 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
