From 760d0a2a75aba6307550bf551c5eb06174c256b5 Mon Sep 17 00:00:00 2001 From: Tzafrir Cohen Date: Thu, 10 Mar 2011 18:48:11 +0000 Subject: xpp: use 'xtalk' for the USB access code * Move most of the USB access code from xpp/ to xpp/xtalk/ . * astribank_tool and such tools can now use a shorter -D mmm/nnn rather than a full path. Signed-off-by: Oron Peled Acked-by: Tzafrir Cohen git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9825 a0bf4364-ded3-4de4-8d8a-66a801d63aff --- xpp/astribank_hexload.8 | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'xpp/astribank_hexload.8') diff --git a/xpp/astribank_hexload.8 b/xpp/astribank_hexload.8 index 6808927..08054f6 100644 --- a/xpp/astribank_hexload.8 +++ b/xpp/astribank_hexload.8 @@ -20,11 +20,11 @@ firmware. It is normally run by the script xpp_fxloader. .B \-D .I device-path .RS -Required. The device to read from/write to. On modern UDEV-based system -this is usually /dev/bus/usb/\fIbus_num\fR/\fIdevice_num\fR, -where \fIbus_num\fR and \fIdevice_num\fR are the first two numbers in the -output of lsusb(8). -On older systems that use usbfs, it is usually +Required. The device to read from/write to. This is +\fIbus_num\fR/\fIdevice_num\fR, where \fIbus_num\fR and \fIdevice_num\fR +are the first two numbers in the output of lsusb(8) or dahdi_hardware(8). +On older versions of this toolyou needed a complete path to the device, +which would be /dev/bus/usb/\fIbus_num\fR/\fIdevice_num\fR, or /proc/bus/usb/\fIbus_num\fR/\fIdevice_num\fR. .RE -- cgit v1.2.3