diff options
Diffstat (limited to 'pjmedia/src/pjmedia-codec/speex/z-mdf.c')
| -rw-r--r-- | pjmedia/src/pjmedia-codec/speex/z-mdf.c | 741 |
1 files changed, 0 insertions, 741 deletions
diff --git a/pjmedia/src/pjmedia-codec/speex/z-mdf.c b/pjmedia/src/pjmedia-codec/speex/z-mdf.c deleted file mode 100644 index 59a68be5..00000000 --- a/pjmedia/src/pjmedia-codec/speex/z-mdf.c +++ /dev/null @@ -1,741 +0,0 @@ -/* Copyright (C) 2003-2007 Jean-Marc Valin - - File: mdf.c - Echo canceller based on the MDF algorithm (see below) - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -/* - The echo canceller is based on the MDF algorithm described in: - - J. S. Soo, K. K. Pang Multidelay block frequency adaptive filter, - IEEE Trans. Acoust. Speech Signal Process., Vol. ASSP-38, No. 2, - February 1990. - - We use the Alternatively Updated MDF (AUMDF) variant. Robustness to - double-talk is achieved using a variable learning rate as described in: - - Valin, J.-M., On Adjusting the Learning Rate in Frequency Domain Echo - Cancellation With Double-Talk. Submitted to IEEE Transactions on Speech - and Audio Processing, 2006. - - There is no explicit double-talk detection, but a continuous variation - in the learning rate based on residual echo, double-talk and background - noise. - - About the fixed-point version: - All the signals are represented with 16-bit words. The filter weights - are represented with 32-bit words, but only the top 16 bits are used - in most cases. The lower 16 bits are completely unreliable (due to the - fact that the update is done only on the top bits), but help in the - adaptation -- probably by removing a "threshold effect" due to - quantization (rounding going to zero) when the gradient is small. - - Another kludge that seems to work good: when performing the weight - update, we only move half the way toward the "goal" this seems to - reduce the effect of quantization noise in the update phase. This - can be seen as applying a gradient descent on a "soft constraint" - instead of having a hard constraint. - -*/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "misc.h" -#include "speex/speex_echo.h" -#include "fftwrap.h" -#include "pseudofloat.h" -#include "math_approx.h" - -#ifndef M_PI -#define M_PI 3.14159265358979323846 -#endif - -#define min(a,b) ((a)<(b) ? (a) : (b)) -#define max(a,b) ((a)>(b) ? (a) : (b)) - -#ifdef FIXED_POINT -#define WEIGHT_SHIFT 11 -#define NORMALIZE_SCALEDOWN 5 -#define NORMALIZE_SCALEUP 3 -#else -#define WEIGHT_SHIFT 0 -#endif - -#ifdef FIXED_POINT -static const spx_float_t MIN_LEAK = ((spx_float_t){16777, -24}); -#define TOP16(x) ((x)>>16) -#else -static const spx_float_t MIN_LEAK = .001f; -#define TOP16(x) (x) -#endif - - -/** Speex echo cancellation state. */ -struct SpeexEchoState_ { - int frame_size; /**< Number of samples processed each time */ - int window_size; - int M; - int cancel_count; - int adapted; - spx_int32_t sampling_rate; - spx_word16_t spec_average; - spx_word16_t beta0; - spx_word16_t beta_max; - spx_word32_t sum_adapt; - spx_word16_t *e; - spx_word16_t *x; - spx_word16_t *X; - spx_word16_t *d; - spx_word16_t *y; - spx_word16_t *last_y; - spx_word32_t *Yps; - spx_word16_t *Y; - spx_word16_t *E; - spx_word32_t *PHI; - spx_word32_t *W; - spx_word32_t *power; - spx_float_t *power_1; - spx_word16_t *wtmp; -#ifdef FIXED_POINT - spx_word16_t *wtmp2; -#endif - spx_word32_t *Rf; - spx_word32_t *Yf; - spx_word32_t *Xf; - spx_word32_t *Eh; - spx_word32_t *Yh; - spx_float_t Pey; - spx_float_t Pyy; - spx_word16_t *window; - void *fft_table; - spx_word16_t memX, memD, memE; - spx_word16_t preemph; - spx_word16_t notch_radius; - spx_mem_t notch_mem[2]; -}; - -static inline void filter_dc_notch16(spx_int16_t *in, spx_word16_t radius, spx_word16_t *out, int len, spx_mem_t *mem) -{ - int i; - spx_word16_t den2; -#ifdef FIXED_POINT - den2 = MULT16_16_Q15(radius,radius) + MULT16_16_Q15(QCONST16(.7,15),MULT16_16_Q15(32767-radius,32767-radius)); -#else - den2 = radius*radius + .7*(1-radius)*(1-radius); -#endif - /*printf ("%d %d %d %d %d %d\n", num[0], num[1], num[2], den[0], den[1], den[2]);*/ - for (i=0;i<len;i++) - { - spx_word16_t vin = in[i]; - spx_word32_t vout = mem[0] + SHL32(EXTEND32(vin),15); -#ifdef FIXED_POINT - mem[0] = mem[1] + SHL32(SHL32(-EXTEND32(vin),15) + MULT16_32_Q15(radius,vout),1); -#else - mem[0] = mem[1] + 2*(-vin + radius*vout); -#endif - mem[1] = SHL32(EXTEND32(vin),15) - MULT16_32_Q15(den2,vout); - out[i] = SATURATE32(PSHR32(MULT16_32_Q15(radius,vout),15),32767); - } -} - -static inline spx_word32_t inner_prod(const spx_word16_t *x, const spx_word16_t *y, int len) -{ - spx_word32_t sum=0; - len >>= 2; - while(len--) - { - spx_word32_t part=0; - part = MAC16_16(part,*x++,*y++); - part = MAC16_16(part,*x++,*y++); - part = MAC16_16(part,*x++,*y++); - part = MAC16_16(part,*x++,*y++); - /* HINT: If you had a 40-bit accumulator, you could shift only at the end */ - sum = ADD32(sum,SHR32(part,6)); - } - return sum; -} - -/** Compute power spectrum of a half-complex (packed) vector */ -static inline void power_spectrum(spx_word16_t *X, spx_word32_t *ps, int N) -{ - int i, j; - ps[0]=MULT16_16(X[0],X[0]); - for (i=1,j=1;i<N-1;i+=2,j++) - { - ps[j] = MULT16_16(X[i],X[i]) + MULT16_16(X[i+1],X[i+1]); - } - ps[j]=MULT16_16(X[i],X[i]); -} - -/** Compute cross-power spectrum of a half-complex (packed) vectors and add to acc */ -#ifdef FIXED_POINT -static inline void spectral_mul_accum(spx_word16_t *X, spx_word32_t *Y, spx_word16_t *acc, int N, int M) -{ - int i,j; - spx_word32_t tmp1=0,tmp2=0; - for (j=0;j<M;j++) - { - tmp1 = MAC16_16(tmp1, X[j*N],TOP16(Y[j*N])); - } - acc[0] = PSHR32(tmp1,WEIGHT_SHIFT); - for (i=1;i<N-1;i+=2) - { - tmp1 = tmp2 = 0; - for (j=0;j<M;j++) - { - tmp1 = SUB32(MAC16_16(tmp1, X[j*N+i],TOP16(Y[j*N+i])), MULT16_16(X[j*N+i+1],TOP16(Y[j*N+i+1]))); - tmp2 = MAC16_16(MAC16_16(tmp2, X[j*N+i+1],TOP16(Y[j*N+i])), X[j*N+i], TOP16(Y[j*N+i+1])); - } - acc[i] = PSHR32(tmp1,WEIGHT_SHIFT); - acc[i+1] = PSHR32(tmp2,WEIGHT_SHIFT); - } - tmp1 = tmp2 = 0; - for (j=0;j<M;j++) - { - tmp1 = MAC16_16(tmp1, X[(j+1)*N-1],TOP16(Y[(j+1)*N-1])); - } - acc[N-1] = PSHR32(tmp1,WEIGHT_SHIFT); -} -#else -static inline void spectral_mul_accum(spx_word16_t *X, spx_word32_t *Y, spx_word16_t *acc, int N, int M) -{ - int i,j; - for (i=0;i<N;i++) - acc[i] = 0; - for (j=0;j<M;j++) - { - acc[0] += X[0]*Y[0]; - for (i=1;i<N-1;i+=2) - { - acc[i] += (X[i]*Y[i] - X[i+1]*Y[i+1]); - acc[i+1] += (X[i+1]*Y[i] + X[i]*Y[i+1]); - } - acc[i] += X[i]*Y[i]; - X += N; - Y += N; - } -} -#endif - -/** Compute weighted cross-power spectrum of a half-complex (packed) vector with conjugate */ -static inline void weighted_spectral_mul_conj(spx_float_t *w, spx_word16_t *X, spx_word16_t *Y, spx_word32_t *prod, int N) -{ - int i, j; - prod[0] = FLOAT_MUL32(w[0],MULT16_16(X[0],Y[0])); - for (i=1,j=1;i<N-1;i+=2,j++) - { - prod[i] = FLOAT_MUL32(w[j],MAC16_16(MULT16_16(X[i],Y[i]), X[i+1],Y[i+1])); - prod[i+1] = FLOAT_MUL32(w[j],MAC16_16(MULT16_16(-X[i+1],Y[i]), X[i],Y[i+1])); - } - prod[i] = FLOAT_MUL32(w[j],MULT16_16(X[i],Y[i])); -} - - -/** Creates a new echo canceller state */ -SpeexEchoState *speex_echo_state_init(int frame_size, int filter_length) -{ - int i,N,M; - SpeexEchoState *st = (SpeexEchoState *)speex_alloc(sizeof(SpeexEchoState)); - - st->frame_size = frame_size; - st->window_size = 2*frame_size; - N = st->window_size; - M = st->M = (filter_length+st->frame_size-1)/frame_size; - st->cancel_count=0; - st->sum_adapt = 0; - /* FIXME: Make that an init option (new API call?) */ - st->sampling_rate = 8000; - st->spec_average = DIV32_16(SHL32(st->frame_size, 15), st->sampling_rate); -#ifdef FIXED_POINT - st->beta0 = DIV32_16(SHL32(st->frame_size, 16), st->sampling_rate); - st->beta_max = DIV32_16(SHL32(st->frame_size, 14), st->sampling_rate); -#else - st->beta0 = (2.0f*st->frame_size)/st->sampling_rate; - st->beta_max = (.5f*st->frame_size)/st->sampling_rate; -#endif - - st->fft_table = spx_fft_init(N); - - st->e = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - st->x = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - st->d = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - st->y = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - st->Yps = (spx_word32_t*)speex_alloc(N*sizeof(spx_word32_t)); - st->last_y = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - st->Yf = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - st->Rf = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - st->Xf = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - st->Yh = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - st->Eh = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - - st->X = (spx_word16_t*)speex_alloc(M*N*sizeof(spx_word16_t)); - st->Y = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - st->E = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - st->W = (spx_word32_t*)speex_alloc(M*N*sizeof(spx_word32_t)); - st->PHI = (spx_word32_t*)speex_alloc(M*N*sizeof(spx_word32_t)); - st->power = (spx_word32_t*)speex_alloc((frame_size+1)*sizeof(spx_word32_t)); - st->power_1 = (spx_float_t*)speex_alloc((frame_size+1)*sizeof(spx_float_t)); - st->window = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - st->wtmp = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); -#ifdef FIXED_POINT - st->wtmp2 = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - for (i=0;i<N>>1;i++) - { - st->window[i] = (16383-SHL16(spx_cos(DIV32_16(MULT16_16(25736,i<<1),N)),1)); - st->window[N-i-1] = st->window[i]; - } -#else - for (i=0;i<N;i++) - st->window[i] = .5-.5*cos(2*M_PI*i/N); -#endif - for (i=0;i<N*M;i++) - { - st->W[i] = st->PHI[i] = 0; - } - st->memX=st->memD=st->memE=0; - st->preemph = QCONST16(.9,15); - if (st->sampling_rate<12000) - st->notch_radius = QCONST16(.9, 15); - else if (st->sampling_rate<24000) - st->notch_radius = QCONST16(.982, 15); - else - st->notch_radius = QCONST16(.992, 15); - - st->notch_mem[0] = st->notch_mem[1] = 0; - st->adapted = 0; - st->Pey = st->Pyy = FLOAT_ONE; - return st; -} - -/** Resets echo canceller state */ -void speex_echo_state_reset(SpeexEchoState *st) -{ - int i, M, N; - st->cancel_count=0; - N = st->window_size; - M = st->M; - for (i=0;i<N*M;i++) - { - st->W[i] = 0; - st->X[i] = 0; - } - for (i=0;i<=st->frame_size;i++) - st->power[i] = 0; - - st->adapted = 0; - st->sum_adapt = 0; - st->Pey = st->Pyy = FLOAT_ONE; - -} - -/** Destroys an echo canceller state */ -void speex_echo_state_destroy(SpeexEchoState *st) -{ - spx_fft_destroy(st->fft_table); - - speex_free(st->e); - speex_free(st->x); - speex_free(st->d); - speex_free(st->y); - speex_free(st->last_y); - speex_free(st->Yps); - speex_free(st->Yf); - speex_free(st->Rf); - speex_free(st->Xf); - speex_free(st->Yh); - speex_free(st->Eh); - - speex_free(st->X); - speex_free(st->Y); - speex_free(st->E); - speex_free(st->W); - speex_free(st->PHI); - speex_free(st->power); - speex_free(st->power_1); - speex_free(st->window); - speex_free(st->wtmp); -#ifdef FIXED_POINT - speex_free(st->wtmp2); -#endif - speex_free(st); -} - -extern int fixed_point; -/** Performs echo cancellation on a frame */ -void speex_echo_cancel(SpeexEchoState *st, short *ref, short *echo, short *out, spx_int32_t *Yout) -{ - int i,j; - int N,M; - spx_word32_t Syy,See; - spx_word16_t leak_estimate; - spx_word16_t ss, ss_1; - spx_float_t Pey = FLOAT_ONE, Pyy=FLOAT_ONE; - spx_float_t alpha, alpha_1; - spx_word16_t RER; - spx_word32_t tmp32; - spx_word16_t M_1; - - N = st->window_size; - M = st->M; - st->cancel_count++; -#ifdef FIXED_POINT - ss=DIV32_16(11469,M); - ss_1 = SUB16(32767,ss); - M_1 = DIV32_16(32767,M); -#else - ss=.35/M; - ss_1 = 1-ss; - M_1 = 1.f/M; -#endif - - filter_dc_notch16(ref, st->notch_radius, st->d, st->frame_size, st->notch_mem); - /* Copy input data to buffer */ - for (i=0;i<st->frame_size;i++) - { - spx_word16_t tmp; - st->x[i] = st->x[i+st->frame_size]; - st->x[i+st->frame_size] = SUB16(echo[i], MULT16_16_P15(st->preemph, st->memX)); - st->memX = echo[i]; - - tmp = st->d[i]; - st->d[i] = st->d[i+st->frame_size]; - st->d[i+st->frame_size] = SUB16(tmp, MULT16_16_P15(st->preemph, st->memD)); - st->memD = tmp; - } - - /* Shift memory: this could be optimized eventually*/ - for (i=0;i<N*(M-1);i++) - st->X[i]=st->X[i+N]; - - /* Convert x (echo input) to frequency domain */ - spx_fft(st->fft_table, st->x, &st->X[(M-1)*N]); - - /* Compute filter response Y */ - spectral_mul_accum(st->X, st->W, st->Y, N, M); - - spx_ifft(st->fft_table, st->Y, st->y); - -#if 1 - spectral_mul_accum(st->X, st->PHI, st->Y, N, M); - spx_ifft(st->fft_table, st->Y, st->e); -#endif - - /* Compute error signal (for the output with de-emphasis) */ - for (i=0;i<st->frame_size;i++) - { - spx_word32_t tmp_out; -#if 1 - spx_word16_t y = MULT16_16_Q15(st->window[i+st->frame_size],st->e[i+st->frame_size]) + MULT16_16_Q15(st->window[i],st->y[i+st->frame_size]); - tmp_out = SUB32(EXTEND32(st->d[i+st->frame_size]), EXTEND32(y)); -#else - tmp_out = SUB32(EXTEND32(st->d[i+st->frame_size]), EXTEND32(st->y[i+st->frame_size])); -#endif - - /* Saturation */ - if (tmp_out>32767) - tmp_out = 32767; - else if (tmp_out<-32768) - tmp_out = -32768; - tmp_out = ADD32(tmp_out, EXTEND32(MULT16_16_P15(st->preemph, st->memE))); - out[i] = tmp_out; - st->memE = tmp_out; - } - - /* Compute error signal (filter update version) */ - for (i=0;i<st->frame_size;i++) - { - st->e[i] = 0; - st->e[i+st->frame_size] = st->d[i+st->frame_size] - st->y[i+st->frame_size]; - } - - /* Compute a bunch of correlations */ - See = inner_prod(st->e+st->frame_size, st->e+st->frame_size, st->frame_size); - See = ADD32(See, SHR32(10000,6)); - Syy = inner_prod(st->y+st->frame_size, st->y+st->frame_size, st->frame_size); - - /* Convert error to frequency domain */ - spx_fft(st->fft_table, st->e, st->E); - for (i=0;i<st->frame_size;i++) - st->y[i] = 0; - spx_fft(st->fft_table, st->y, st->Y); - - /* Compute power spectrum of echo (X), error (E) and filter response (Y) */ - power_spectrum(st->E, st->Rf, N); - power_spectrum(st->Y, st->Yf, N); - power_spectrum(&st->X[(M-1)*N], st->Xf, N); - - /* Smooth echo energy estimate over time */ - for (j=0;j<=st->frame_size;j++) - st->power[j] = MULT16_32_Q15(ss_1,st->power[j]) + 1 + MULT16_32_Q15(ss,st->Xf[j]); - - /* Enable this to compute the power based only on the tail (would need to compute more - efficiently to make this really useful */ - if (0) - { - float scale2 = .5f/M; - for (j=0;j<=st->frame_size;j++) - st->power[j] = 0; - for (i=0;i<M;i++) - { - power_spectrum(&st->X[i*N], st->Xf, N); - for (j=0;j<=st->frame_size;j++) - st->power[j] += scale2*st->Xf[j]; - } - } - - /* Compute filtered spectra and (cross-)correlations */ - for (j=st->frame_size;j>=0;j--) - { - spx_float_t Eh, Yh; - Eh = PSEUDOFLOAT(st->Rf[j] - st->Eh[j]); - Yh = PSEUDOFLOAT(st->Yf[j] - st->Yh[j]); - Pey = FLOAT_ADD(Pey,FLOAT_MULT(Eh,Yh)); - Pyy = FLOAT_ADD(Pyy,FLOAT_MULT(Yh,Yh)); -#ifdef FIXED_POINT - st->Eh[j] = MAC16_32_Q15(MULT16_32_Q15(SUB16(32767,st->spec_average),st->Eh[j]), st->spec_average, st->Rf[j]); - st->Yh[j] = MAC16_32_Q15(MULT16_32_Q15(SUB16(32767,st->spec_average),st->Yh[j]), st->spec_average, st->Yf[j]); -#else - st->Eh[j] = (1-st->spec_average)*st->Eh[j] + st->spec_average*st->Rf[j]; - st->Yh[j] = (1-st->spec_average)*st->Yh[j] + st->spec_average*st->Yf[j]; -#endif - } - - /* Compute correlation updatete rate */ - tmp32 = MULT16_32_Q15(st->beta0,Syy); - if (tmp32 > MULT16_32_Q15(st->beta_max,See)) - tmp32 = MULT16_32_Q15(st->beta_max,See); - alpha = FLOAT_DIV32(tmp32, See); - alpha_1 = FLOAT_SUB(FLOAT_ONE, alpha); - /* Update correlations (recursive average) */ - st->Pey = FLOAT_ADD(FLOAT_MULT(alpha_1,st->Pey) , FLOAT_MULT(alpha,Pey)); - st->Pyy = FLOAT_ADD(FLOAT_MULT(alpha_1,st->Pyy) , FLOAT_MULT(alpha,Pyy)); - if (FLOAT_LT(st->Pyy, FLOAT_ONE)) - st->Pyy = FLOAT_ONE; - /* We don't really hope to get better than 33 dB (MIN_LEAK-3dB) attenuation anyway */ - if (FLOAT_LT(st->Pey, FLOAT_MULT(MIN_LEAK,st->Pyy))) - st->Pey = FLOAT_MULT(MIN_LEAK,st->Pyy); - if (FLOAT_GT(st->Pey, st->Pyy)) - st->Pey = st->Pyy; - /* leak_estimate is the limear regression result */ - leak_estimate = FLOAT_EXTRACT16(FLOAT_SHL(FLOAT_DIVU(st->Pey, st->Pyy),14)); - if (leak_estimate > 16383) - leak_estimate = 32767; - else - leak_estimate = SHL16(leak_estimate,1); - /*printf ("%f\n", leak_estimate);*/ - - /* Compute Residual to Error Ratio */ -#ifdef FIXED_POINT - tmp32 = MULT16_32_Q15(leak_estimate,Syy); - tmp32 = ADD32(tmp32, SHL32(tmp32,1)); - if (tmp32 > SHR32(See,1)) - tmp32 = SHR32(See,1); - RER = FLOAT_EXTRACT16(FLOAT_SHL(FLOAT_DIV32(tmp32,See),15)); -#else - RER = 3.*MULT16_32_Q15(leak_estimate,Syy) / See; - if (RER > .5) - RER = .5; -#endif - - /* We consider that the filter has had minimal adaptation if the following is true*/ - if (!st->adapted && st->sum_adapt > QCONST32(1,15)) - { - st->adapted = 1; - } - - if (st->adapted) - { - for (i=0;i<=st->frame_size;i++) - { - spx_word32_t r, e; - /* Compute frequency-domain adaptation mask */ - r = MULT16_32_Q15(leak_estimate,SHL32(st->Yf[i],3)); - e = SHL32(st->Rf[i],3)+1; -#ifdef FIXED_POINT - if (r>SHR32(e,1)) - r = SHR32(e,1); -#else - if (r>.5*e) - r = .5*e; -#endif - r = MULT16_32_Q15(QCONST16(.8,15),r) + MULT16_32_Q15(QCONST16(.2,15),(spx_word32_t)(MULT16_32_Q15(RER,e))); - /*st->power_1[i] = adapt_rate*r/(e*(1+st->power[i]));*/ - st->power_1[i] = FLOAT_SHL(FLOAT_DIV32_FLOAT(MULT16_32_Q15(M_1,r),FLOAT_MUL32U(e,st->power[i]+10)),WEIGHT_SHIFT+16); - } - } else { - spx_word32_t Sxx; - spx_word16_t adapt_rate=0; - - Sxx = inner_prod(st->x+st->frame_size, st->x+st->frame_size, st->frame_size); - /* Temporary adaption rate if filter is not adapted correctly */ - - tmp32 = MULT16_32_Q15(QCONST16(.15f, 15), Sxx); -#ifdef FIXED_POINT - if (Sxx > SHR32(See,2)) - Sxx = SHR32(See,2); -#else - if (Sxx > .25*See) - Sxx = .25*See; -#endif - adapt_rate = FLOAT_EXTRACT16(FLOAT_SHL(FLOAT_DIV32(MULT16_32_Q15(M_1,Sxx), See),15)); - - for (i=0;i<=st->frame_size;i++) - st->power_1[i] = FLOAT_SHL(FLOAT_DIV32(EXTEND32(adapt_rate),ADD32(st->power[i],10)),WEIGHT_SHIFT+1); - - - /* How much have we adapted so far? */ - st->sum_adapt = ADD32(st->sum_adapt,adapt_rate); - } - /* Compute weight gradient */ - for (j=0;j<M;j++) - { - weighted_spectral_mul_conj(st->power_1, &st->X[j*N], st->E, st->PHI+N*j, N); - } - - /* Gradient descent */ - for (i=0;i<M*N;i++) - { - st->W[i] += st->PHI[i]; - /* Old value of W in PHI */ - st->PHI[i] = st->W[i] - st->PHI[i]; - } - - /* Update weight to prevent circular convolution (MDF / AUMDF) */ - for (j=0;j<M;j++) - { - /* This is a variant of the Alternatively Updated MDF (AUMDF) */ - /* Remove the "if" to make this an MDF filter */ - if (j==M-1 || st->cancel_count%(M-1) == j) - { -#ifdef FIXED_POINT - for (i=0;i<N;i++) - st->wtmp2[i] = PSHR32(st->W[j*N+i],NORMALIZE_SCALEDOWN+16); - spx_ifft(st->fft_table, st->wtmp2, st->wtmp); - for (i=0;i<st->frame_size;i++) - { - st->wtmp[i]=0; - } - for (i=st->frame_size;i<N;i++) - { - st->wtmp[i]=SHL(st->wtmp[i],NORMALIZE_SCALEUP); - } - spx_fft(st->fft_table, st->wtmp, st->wtmp2); - /* The "-1" in the shift is a sort of kludge that trades less efficient update speed for decrease noise */ - for (i=0;i<N;i++) - st->W[j*N+i] -= SHL32(st->wtmp2[i],16+NORMALIZE_SCALEDOWN-NORMALIZE_SCALEUP-1); -#else - spx_ifft(st->fft_table, &st->W[j*N], st->wtmp); - for (i=st->frame_size;i<N;i++) - { - st->wtmp[i]=0; - } - spx_fft(st->fft_table, st->wtmp, &st->W[j*N]); -#endif - } - } - - /* Compute spectrum of estimated echo for use in an echo post-filter (if necessary)*/ - if (Yout) - { - spx_word16_t leak2; - if (st->adapted) - { - /* If the filter is adapted, take the filtered echo */ - for (i=0;i<st->frame_size;i++) - st->last_y[i] = st->last_y[st->frame_size+i]; - for (i=0;i<st->frame_size;i++) - st->last_y[st->frame_size+i] = ref[i]-out[i]; - } else { - /* If filter isn't adapted yet, all we can do is take the echo signal directly */ - for (i=0;i<N;i++) - st->last_y[i] = st->x[i]; - } - - /* Apply hanning window (should pre-compute it)*/ - for (i=0;i<N;i++) - st->y[i] = MULT16_16_Q15(st->window[i],st->last_y[i]); - - /* Compute power spectrum of the echo */ - spx_fft(st->fft_table, st->y, st->Y); - power_spectrum(st->Y, st->Yps, N); - -#ifdef FIXED_POINT - if (leak_estimate > 16383) - leak2 = 32767; - else - leak2 = SHL16(leak_estimate, 1); -#else - if (leak_estimate>.5) - leak2 = 1; - else - leak2 = 2*leak_estimate; -#endif - /* Estimate residual echo */ - for (i=0;i<=st->frame_size;i++) - Yout[i] = MULT16_32_Q15(leak2,st->Yps[i]); - } -} - - -int speex_echo_ctl(SpeexEchoState *st, int request, void *ptr) -{ - switch(request) - { - - case SPEEX_ECHO_GET_FRAME_SIZE: - (*(int*)ptr) = st->frame_size; - break; - case SPEEX_ECHO_SET_SAMPLING_RATE: - st->sampling_rate = (*(int*)ptr); - st->spec_average = DIV32_16(SHL32(st->frame_size, 15), st->sampling_rate); -#ifdef FIXED_POINT - st->beta0 = DIV32_16(SHL32(st->frame_size, 16), st->sampling_rate); - st->beta_max = DIV32_16(SHL32(st->frame_size, 14), st->sampling_rate); -#else - st->beta0 = (2.0f*st->frame_size)/st->sampling_rate; - st->beta_max = (.5f*st->frame_size)/st->sampling_rate; -#endif - if (st->sampling_rate<12000) - st->notch_radius = QCONST16(.9, 15); - else if (st->sampling_rate<24000) - st->notch_radius = QCONST16(.982, 15); - else - st->notch_radius = QCONST16(.992, 15); - break; - case SPEEX_ECHO_GET_SAMPLING_RATE: - (*(int*)ptr) = st->sampling_rate; - break; - default: - speex_warning_int("Unknown speex_echo_ctl request: ", request); - return -1; - } - return 0; -} |