diff options
| author | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2007-10-16 17:55:05 +0000 |
|---|---|---|
| committer | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2007-10-16 17:55:05 +0000 |
| commit | 6bc1dbffe9f77eb3c85a655ffeaff64d963c6b43 (patch) | |
| tree | e94ccfa1c5bf43ffac9eb4ec251eee58ae8fe39a /xpp/README.Astribank | |
| parent | 37886eb9069e5a088d721f41202e7c3dd4ca0a09 (diff) | |
xpp r4892:
* Zaptel/Hardware perl modules:
- Use sysfs directly. Don't rely on lspci/lsusb.
- Each device has a description and driver name.
- Zaptel::Hardware::drivers() to show the list of required drivers
for this system (see zaptel_drivers).
- zaptel_hardware shows a description and a (suggested?) driver.
* zt_registration sorts by Serial first and only then by connector.
* USB_FW.hex replaces all the USB_11x0.hex .
- Separate USB interface for the management processor.
- Hence fpga_load can now work even with drivers loaded.
* Fix firmware upgrading.
* Fix manual firmware loading while auto-loading.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3142 5390a7c7-147a-4af0-8ec9-7488f05a26cb
Diffstat (limited to 'xpp/README.Astribank')
| -rw-r--r-- | xpp/README.Astribank | 10 |
1 files changed, 4 insertions, 6 deletions
diff --git a/xpp/README.Astribank b/xpp/README.Astribank index 17d4fba..af1c690 100644 --- a/xpp/README.Astribank +++ b/xpp/README.Astribank @@ -139,7 +139,7 @@ completed the Vendor ID is e4e4 and the Product ID is 1131. You can use the following command in order to load the "USB" firmware manually: - fxload -t fx2 -D /proc/bus/usb/MMM/NNN -I /usr/share/zaptel/USB_1130.hex + fxload -t fx2 -D /proc/bus/usb/MMM/NNN -I /usr/share/zaptel/USB_FW.hex where, @@ -163,9 +163,9 @@ which is built in the directory xpp/utils and then copied to folder /usr/sbin during Zaptel installation. The command syntax is similar to the syntax of fxload. You can use the -following command in order to load the "USB" firmware manually: +following command in order to load the FPGA firmware manually: - fpga_load -D /proc/bus/usb/MMM/NNN -I /usr/share/zaptel/FPGA_FXS.hex + fpga_load -D /proc/bus/usb/MMM/NNN -I /usr/share/zaptel/FPGA_1151.hex Please note, that NNN value differs from that that was used for the fxload command due to the fact that device has "reconnected" itself @@ -226,12 +226,10 @@ second time for FPGA firmware loading. Firmware Resetting ~~~~~~~~~~~~~~~~~~ Newer versions of the USB firmware can now be reset using 'fpga_load -r'. -This will only work when the device is not used by the driver, so you may -need to run 'rmmod xpp_usb' before. Also you can try the following: - rmmod xpp_usb; /usr/share/zaptel/xpp_fxloader reset + /usr/share/zaptel/xpp_fxloader reset # if asterisk was running: you may need to stop/restart it now. # if there are some "disconnected" spans in /proc/xpp/xbuses # wait a while, until you see the 1152 IDs again, and then: |