XPP documentation fixes.

git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4271 5390a7c7-147a-4af0-8ec9-7488f05a26cb

1 files changed, 19 insertions, 20 deletions

diff --git a/xpp/README.Astribank b/xpp/README.Astribank
index 5cf6804..af43eb1 100644
--- a/xpp/README.Astribank
+++ b/xpp/README.Astribank
@@ -1312,21 +1312,22 @@ rx_tasklet (xpp)::
 
 debug (all modules)::
   It will make the driver to print tons of debugging messages. You can 
-  set/unset the parameter at run-time.
-
-  The parameter value is a bitmask of several values. The different bits 
-  meaning as it defined in xpp/zap_debug.h: 
+  set/unset the parameter at run-time. The parameter value is a bitmask 
+  of several values. The different bits  meaning as it defined in 
+  xpp/zap_debug.h: 
 
   * 0  - Disable debug messages
   * 1  - GENERAL - General debug comments.
-  * 2  - PCM - PCM-related messages. Tend to flood logs.
+  * 2  - PCM - PCM-related messages. Tends to flood logs.
   * 4  - LEDS - Anything related to the LEDs status control. The driver
          produces a lot of messages when the option is enabled.
   * 8  - SYNC - Synchronization related messages.
   * 16 - SIGNAL - Zaptel signalling related messages.
-  * 32 - PROC - procfs interface related messages.
-  * 64 - REGS - Reading and writing to chip registers. The driver produces
-         a lot of messages when the option is enabled.
+  * 32 - PROC - Messages related to the procfs interface.
+  * 64 - REGS - Reading and writing to chip registers. Tends to flood
+  	 logs.
+  * 128 - DEVICES - Device instantiation, destruction and such.
+  * 256 - COMMANDS - Protocol commands. Tends to flood logs.
 
   For example,
 
@@ -1344,24 +1345,22 @@ vmwineon (xpd_fxs)::
 
 usb1 (xpp_usb)::
   Enable (1) or disable (0) support of USB1 devices. Disabled by default.
-  +
-  +
+
   USB1 devices are not well-tested. It seems that they don't work at all
   for Astribank BRI. Generally they should work with the current code, but
-  we expect the voice quality issues. Hence we would like to make it very clear that
-  you if you have a USB1 port (rather than a USB2 one, as recommended) you
-  will have to take an action to enable the device.
+  we expect the voice quality issues. Hence we would like to make it
+  very clear that you if you have a USB1 port (rather than a USB2 one, as 
+  recommended) you will have to take an action to enable the device.
 
 poll intervals (various)::
   There are various values which the driver occasionally polls the device
   for. For instance, the parameter poll_battery_interval for xpd_fxo
-  to poll the battery (in order to know if the telco line is actually
-  connected.)
-  +
-  +
-  The value of those parameters is typically a number in milliseconds or 0
-  to disable. Under normal operation there should be no reason to play
-  with those parameters.
+  to poll the battery, in order to know if the telco line is actually
+  connected.
+
+  The value of those parameters is typically a number in milliseconds. 
+  0 is used to disable polling. Under normal operation there should be 
+  no reason to play with those parameters.
 
 dtmf_detection (xpd_fxs)::
   Enable (1) or disable (0) support of hardware DTMF detection by the