r1719@boole: tzafrir | 2006-12-15 15:50:57 +0200

Sync to xpp RELEASE-1.2.0 2933.
   
 r2847@boole:  diego | 2006-12-03 10:33:00 +0200
 added documentation which explains which packages are needed to build 
 the drivers on different distributions.
 
 r2862@boole:  tzafrir | 2006-12-05 08:43:50 +0200
 README.Astribank: A typo in the sample config (changeset:2861).
 
 r2891@boole:  tzafrir | 2006-12-08 01:11:45 +0200
 Re-accept changeset:2832 after all.
 
 r2892@boole:  tzafrir | 2006-12-08 02:46:07 +0200
 Merge genzaptelconf changeset:2866 from trunk:
  * Zapata comment on unidentified channel goes to $zapata_file
  * Correct pattern for Sangoma A200 card's channels.
 
 r2893@boole:  tzafrir | 2006-12-08 03:11:37 +0200
 genzaptelconf:
  * Add options xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel.
  * Do print the original line for every channel.
 
 r2909@boole:  tzafrir | 2006-12-10 20:03:59 +0200
 Add some sleeps in older kernels in the firmware loading script.
 
 r2932@boole:  tzafrir | 2006-12-14 17:30:12 +0200
 Make the warning about a call to off-hook FXO debug. At least if we 
 cannot suppress it at module load time.
 
 r2933@boole:  tzafrir | 2006-12-14 17:32:00 +0200
 Don't redefine 'bool' on newer kerenls to fix building with kernel 
 2.6.19. Taken from Digium tree.
 (from changeset:2930)

git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1720 5390a7c7-147a-4af0-8ec9-7488f05a26cb

2 files changed, 30 insertions, 8 deletions

diff --git a/xpp/utils/genzaptelconf b/xpp/utils/genzaptelconf
index a000ec0..3e89915 100755
--- a/xpp/utils/genzaptelconf
+++ b/xpp/utils/genzaptelconf
@@ -295,6 +295,9 @@ print_pattern() {
 		# sadly, both input ports and output ports go into the same span as 
 		# the FXS ports. Thus we need to separate between them. See also 
 		# the zapata.conf section:
+		
+		echo ";;; line=\"$line\""                      >> $zapata_file
+		
 		if [ "$astbank_type" != '' ]; 
 			then echo "# astbanktype: $astbank_type" >>$zaptel_file; 
 		fi
@@ -369,7 +372,14 @@ print_pattern() {
 			  esac
 				reset_values="$reset_values cidsignalling cidstart"
 			fi
-			echo ";;; line=\"$line\""                      >> $zapata_file
+			case "$line" in
+			*XPP_FXO*) 
+				if [ "$xpp_fxo_rxgain" != '' ]; then
+					echo "rxgain=$xpp_fxo_rxgain"             >> $zapata_file
+					reset_values="$reset_values rxgain"
+				fi
+				;;
+			esac
 			# if kewlstart is not used, busydetect has to be employed:
 			if [ "$method" = 'ls' ]
 			then
@@ -576,13 +586,11 @@ reset_zapata_entry() {
 	for arg in "$@"; do
 		case "$arg" in
 		busydetect)      echo "busydetect=no"   >>$conf_file;;
-		callerid)        echo "callerid="       >>$conf_file;;
-		cidstart)        echo "cidstart="       >>$conf_file;;
-		cidsignalling)   echo "cidsignalling="  >>$conf_file;;
 		context)         echo "context=default" >>$conf_file;;
-		group)           echo "group="          >>$conf_file;;
 		immediate)       echo "immediate=no"    >>$conf_file;;
-		mailbox)         echo "mailbox="        >>$conf_file;;
+		rxgain)          echo "rxgain=0"        >>$conf_file;;
+		txgain)          echo "txgain=0"        >>$conf_file;;
+		*)               echo "$arg="           >>$conf_file;;
 		esac
 	done
 }
@@ -692,7 +700,7 @@ EOF
 			# in case this is a real channel. 
 			chan_num=`echo $line |awk '{print $1}'`
 			case "$line" in
-			*WCTDM/*|*/WRTDM/*|*OPVXA1200/*) 
+			*WCTDM/*|*\ WRTDM/*|*OPVXA1200/*) 
 				# TDM400P/2400P and similar cards (Sangoma A200, OpenVox A1200)
 				# this can be either FXS or FXO
 				maybe_fxs=0
@@ -812,7 +820,7 @@ EOF
 				list) echo "# ??: $line";;
 				files)
 					echo "# ??: $line" >>$zaptel_file
-					echo "; ??: $line" >>$zaptel_file
+					echo "; ??: $line" >>$zapata_file
 				esac
 				;;
 			esac
diff --git a/xpp/utils/xpp_fxloader b/xpp/utils/xpp_fxloader
index 8c54370..b14f746 100644
--- a/xpp/utils/xpp_fxloader
+++ b/xpp/utils/xpp_fxloader
@@ -75,6 +75,17 @@ REENUM_SLEEP_TIME=3 # only used on manual runs
 
 FPGA_LOAD="/usr/sbin/fpga_load"
 
+# With Kernels older that 2.6.10 it seems to be possible
+# to trigger a race condition by running fxload or fpga_load 
+# immediately after the detection of the device.
+KERNEL_HAS_USB_RACE=0
+case "`uname -r`" in 2.6.[89]*) KERNEL_HAS_USB_RACE=1;; esac
+sleep_if_race() {
+  if [ "$KERNEL_HAS_USB_RACE" = '1' ]; then
+    sleep 2
+  fi
+}
+
 find_dev() {
   v_id=$1
   p_id=$2
@@ -83,6 +94,7 @@ find_dev() {
 }
 
 do_fxload() {
+  sleep_if_race
   ( fxload -t fx2 $* 2>&1 1>/dev/null || exit 1 ) | $LOGGER
 }
 
@@ -120,6 +132,7 @@ load_fpga() {
 	firm_ver=`hexfile_version $FIRMWARE_DIR/$fw`
 
 	$LOGGER "FPGA Firmware $FIRMWARE_DIR/$fw into $dev"
+	sleep_if_race
 	$FPGA_LOAD -D "$dev" -I "$FIRMWARE_DIR/$fw" 2>&1 >/dev/null | $LOGGER
 	status=$PIPESTATUS
 	if [ $status != 0 ]; then
@@ -193,6 +206,7 @@ then
 		else
 			FIRM_FPGA="$FIRMWARE_DIR/FPGA_$prod_id.hex"
 		fi
+		sleep_if_race
 		$FPGA_LOAD -D "$DEVICE" -I "$FIRM_FPGA" 2>&1 >/dev/null | $LOGGER
 		;;
 	esac