Merge xpp rev. 3495:

------------------------------------------------------------------------
r2243 | tzafrir | 2007-02-28 02:05:59 +0200 (Wed, 28 Feb 2007) | 4 lines

* xpp rev. 3495: fix a race in the FXO driver of recent weeks.
* Add the Astribank BRI driver (though still needs bristuffed zaptel
  to build and thus will not build by default)

------------------------------------------------------------------------
r2239 | tzafrir | 2007-02-27 08:14:18 +0200 (Tue, 27 Feb 2007) | 18 lines

Xorcom rev. 3491:
 * Version of xpp modules is set from xpp/.version, rather than "unknown".
 * Astribank devices are now initialized in parallel: faster startup
   when there are multiple Astribanks.
 * Re-added support for the old format of /proc/xpp/sync write:
   (echo N 0 > /proc/xpp/sync ) . The new format (SYNC=NN) is preffered.
 * Firmware update to fix a PCM issue.
 * Fixed a build issue with kernel 2.6.8 .
 * Fixed missing initialization in Zaptel::Xpp::Xbus .
 * genzaptelconf will now set FXS ports as LS by default. To set them as 
   KS, use fxs_default_start=ks in /etc/default/zaptel / /etc/sysconfig/zaptel
   (Also a workaround for #7755 ).
 * Groundwork for sync from zaptel master span: if zaptel is built with
   ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will report its 
   drift from the zaptel sync master.
 * USB firmware update: had bad lines checksums (and fxload did not report).
 * fpga_load can now better report bad hex file checksum ;-) .

------------------------------------------------------------------------
r2223 | tzafrir | 2007-02-24 03:05:05 +0200 (Sat, 24 Feb 2007) | 3 lines

Add the Zaptel and Zaptel::Xpp perl modules, and some simple 
utilities that use them. disabled by default for now.

------------------------------------------------------------------------
r2222 | tzafrir | 2007-02-24 02:55:05 +0200 (Sat, 24 Feb 2007) | 2 lines

Make the xpp/utils/Makefile in 1.2 closer to the one in 1.4 .


git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2247 5390a7c7-147a-4af0-8ec9-7488f05a26cb

1 files changed, 23 insertions, 26 deletions

diff --git a/xpp/xpd.h b/xpp/xpd.h
index 40a6a20..b3dc569 100644
--- a/xpp/xpd.h
+++ b/xpp/xpd.h
@@ -155,6 +155,7 @@ struct	card_desc_struct {
 	byte			rev;		/* Revision number */
 	byte			type;		/* LSB: 1 - to_phone, 0 - to_line */
 	xpd_addr_t		xpd_addr;
+	xpp_line_t		line_status;	/* Initial line status (offhook) */
 };
 
 #ifdef XPP_DEBUGFS
@@ -163,6 +164,27 @@ struct debugfs_data;
 #endif
 
 /*
+ * Encapsulate all poll related data of a single xbus.
+ */
+struct xbus_poller {
+	/*
+	 * Bus scanning
+	 */
+	xbus_t			*xbus;
+	struct workqueue_struct	*wq;
+	bool			is_polling;
+	atomic_t		count_poll_answers;
+	struct list_head	poll_results;
+	wait_queue_head_t	wait_for_polls;
+
+	struct work_struct	xpds_init_work;
+
+	atomic_t		count_xpds_to_initialize;
+	atomic_t		count_xpds_initialized;
+	wait_queue_head_t	wait_for_xpd_initialization;
+};
+
+/*
  * An xbus is a transport layer for Xorcom Protocol commands
  */
 struct xbus {
@@ -186,18 +208,7 @@ struct xbus {
 	atomic_t		packet_counter;		/* Allocated packets */
 	wait_queue_head_t	packet_cache_empty;
 
-	/*
-	 * Bus scanning
-	 */
-	atomic_t		count_poll_answers;
-	struct list_head	poll_results;
-	wait_queue_head_t	wait_for_polls;
-
-	struct work_struct	xpds_init_work;
-
-	atomic_t		count_xpds_to_initialize;
-	atomic_t		count_xpds_initialized;
-	wait_queue_head_t	wait_for_xpd_initialization;
+	struct xbus_poller	*poller;
 
 	struct	rw_semaphore	in_use;
 	int			num_xpds;
@@ -255,16 +266,6 @@ static struct xpd_counters {
 
 #define	XPD_COUNTER_MAX	(sizeof(xpd_counters)/sizeof(xpd_counters[0]))
 
-/* Values of SLIC register 0x40 */
-enum fxs_state {
-	FXS_LINE_DISABLED	= 0x00,
-	FXS_LINE_ENABLED	= 0x01,
-	FXS_LINE_CID		= 0x02,
-	FXS_LINE_TIPOPEN	= 0x03,	/* For GroundStart signalling */
-	FXS_LINE_RING		= 0x04,
-	FXS_LINE_REV_ACTIVE	= 0x05
-};
-
 /*
  * An XPD is a single Xorcom Protocol Device
  */
@@ -285,10 +286,6 @@ struct xpd {
 
 	bool		ringing[CHANNELS_PERXPD];
 
-	enum fxs_state	lasttxhook[CHANNELS_PERXPD];
-	int		idletxhookstate[CHANNELS_PERXPD];	/* IDLE changing hook state */
-	int		ohttimer[CHANNELS_PERXPD];
-
 	xbus_t *xbus;			/* The XBUS we are connected to */
 
 	spinlock_t	lock;