diff options
Diffstat (limited to 'xpp/init_card_3_29')
| -rwxr-xr-x | xpp/init_card_3_29 | 193 |
1 files changed, 0 insertions, 193 deletions
diff --git a/xpp/init_card_3_29 b/xpp/init_card_3_29 deleted file mode 100755 index 574b489..0000000 --- a/xpp/init_card_3_29 +++ /dev/null @@ -1,193 +0,0 @@ -#! /bin/sh -# -# Written by Oron Peled <oron@actcom.co.il> -# Copyright (C) 2006, Xorcom -# -# All rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# See the file LICENSE in the top level of this tarball. -# - -# -# $Id$ -# -# Data format: -# - A comment start with ';' or '#' until the end of line -# - Blank lines are ignored -# - Fields are whitespace separated (spaces or tabs) -# -# The fields are (in command line order): -# 1. SLIC select in decimal (range 0-7). -# 31 is a special value which means ALL SLICS (only some registers -# accept settings for ALL SLICS). -# 2. Command word: -# - RD Read Direct register. -# - RI Read Indirect register. -# - WD Write Direct register. -# - WI Write Indirect register. -# 3. Register number in hexadecimal. -# 4. Low data byte in hexadecimal. (for WD and WI commands). -# 5. High data byte in hexadecimal. (for WI command only). -# -# - -# ----------------------------------==== 8-channel FXS unit initialization ===----------------------------------------- - -set -e - -me=`basename $0` -INIT_DIR=`dirname $0` -XPP_BASE=/proc/xpp -export XPP_BASE -LOGGER="logger -s -t $me" - -ZAPTEL_BOOT_DEBIAN=${ZAPTEL_BOOT_DEBIAN:-/etc/default/zaptel} -ZAPTEL_BOOT_FEDORA=${ZAPTEL_BOOT_FEDORA:-/etc/sysconfig/zaptel} - -# read default configuration from /etc/default/zaptel -if [ -r $ZAPTEL_BOOT_DEBIAN ]; then . $ZAPTEL_BOOT_DEBIAN; fi -if [ -r $ZAPTEL_BOOT_FEDORA ]; then . $ZAPTEL_BOOT_FEDORA; fi - -if [ "$DEBUG_CALIBRATION"=1 ]; then - LOGGER=":" -fi - -# Always redirect stderr somewhere, otherwise the shell script will die -# when it tries to do I/O related stuff on closed file descriptor. -# Our default is to throw it down the bit-bucket. -exec 2> /dev/console -## If you wish to trace this script: -#exec 2> /tmp/xpp_init_$XPD_NAME -## Altenativly, if you have multiple XBUS'es: -#exec 2> /tmp/xpp_init_$XBUS_NAME_$XPD_NAME -#set -x - -# redirect script output to the "slics" (registers command) file: -exec 1> "$XPP_BASE/$XPD_BUS/$XPD_NAME/slics" - -$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Calibrating '$0'" - -"$INIT_DIR/calibrate_slics" - -$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Continue '$0'" - -echo " -# Change SLICs states to "Open state"s (Off,all transfers tristated to avoid data collision), Voltage sense -31 WD 40 00 - -# Flush out energy accumulators -31 WI 58 00 00 -31 WI 59 00 00 -31 WI 5A 00 00 -31 WI 5B 00 00 -31 WI 5C 00 00 -31 WI 5D 00 00 -31 WI 5E 00 00 -31 WI 5F 00 00 -31 WI 61 00 00 -31 WI 58 00 00 -31 WI C1 00 00 -31 WI C2 00 00 -31 WI C3 00 00 -31 WI C4 00 00 -31 WI C5 00 00 -31 WI C6 00 00 -31 WI C7 00 00 -31 WI C8 00 00 -31 WI C9 00 00 -31 WI CA 00 00 -31 WI CB 00 00 -31 WI CC 00 00 -31 WI CD 00 00 -31 WI CE 00 00 -31 WI CF 00 00 -31 WI D0 00 00 -31 WI D1 00 00 -31 WI D2 00 00 -31 WI D3 00 00 - -# Setting of SLICs offsets -# New card initialization -0 WD 02 00 -0 WD 04 00 -1 WD 02 08 -1 WD 04 08 -2 WD 02 10 -2 WD 04 10 -3 WD 02 18 -3 WD 04 18 -4 WD 02 20 -4 WD 04 20 -5 WD 02 28 -5 WD 04 28 -6 WD 02 30 -6 WD 04 30 -7 WD 02 38 -7 WD 04 38 -31 WD 03 00 -31 WD 05 00 - -# Audio path. (also initialize 0A and 0B here if necessary) -31 WD 08 00 -31 WD 09 C0 - -# Automatic/Manual Control: defaults - Cancel Power Alarm -31 WD 43 1E - -# Loop Closure Debounce Interval -31 WD 45 0A - -# Ring Detect Debounce Interval -31 WD 46 47 - -# Battery Feed Control: Battery low (DCSW low) -31 WD 42 00 - -# Loop Current Limit -31 WD 47 00 - -# Ring VBath: -31 WD 4A 3F - - -31 WD 6C 01 - -31 WI 23 00 80 -31 WI 24 20 03 -31 WI 25 8C 08 -31 WI 26 00 01 -31 WI 27 10 00 - -#------ Metering tone -31 WI 17 61 15 # Amplitue Ramp-up -31 WI 18 61 15 # Max Amplitude -31 WI 19 FB 30 # Frequency -31 WD 2C 00 # Timer dL -31 WD 2D 03 # Timer dH - -# ------------------------------------- Initialization of direct registers -------------------------------------------- - -# Mode(8-bit,u-Law,1 PCLK ) setting, Loopbacks and Interrupts clear - -31 WD 01 29 -#31 WD 0E 00 - -#31 WD 15 00 -#31 WD 16 03 - -# Clear pending interrupts -31 WD 12 FF -31 WD 13 FF -31 WD 14 FF - -#31 WD 4A 34 -#31 WD 4B 10 -" | sed -e 's/[;#].*$//' -e '/^[ ]*$/d' - -$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Ending '$0'" -exit 0 |