Age | Commit message (Collapse) | Author |
|
* Improved polarity reversal hangups in FXO (r5194).
Fixed false detection of polarity reversals.
* Optimize xframe allocation, by not zeroing the whole
memory (in get_xframe()).
* Fixed erronous error message that appeared sometimes
from fpga_load during USB renumeration.
* Zaptel::Chans now provides battery() reporting for some FXO
channels (Astribank FXO and wcfxo).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3643 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
loss measurement. Much more accurate than the old version, and can penetrate through background noise that may be on the line as well as noise caused by tones in the background such as reorder or congestion if the timing parameters aren't exactly right in the setup. If you have analog fxo modules, it is recommended that you run fxotune on them again with this latest version. You will definitely see even better results
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3640 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3638 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
interrupt handler.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3618 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3601 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3594 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
- Remove double reads.
- Wait for writes to complete before starting reads.
- Optimize reads of multi-word register.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3592 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
been freed. Closes a
small window of opportunity for NULL pointer access at driver unload time.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3586 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3577 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3564 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3561 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Some more documentation.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3555 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3550 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Do use "crc4" for E1 by default when generating zaptel.conf .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3540 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3534 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
interrupts when there's no hardware connected.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3514 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3509 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* xpd_pri: Basically ready.
* PCM synchronization changes:
- Each Astribank unit ticks independently. Each with its own PLL.
- HOST synchronization is gone. Loading of xpp will no longer cause
useless 250 ticks per second if you have no Astribank.
- Synchronization from the zaptel sync master requires setting
ZAPTEL as sync source (xpp_sync ZAPTEL).
* rx_tasklet is now a parameter of the module xpp, rather than of xpp_usb.
* New FPGA firmware: 5128 (1151) / 5122 (1141, 1131):
- Fixes synchronization issues.
- PRI module: E1 should now work.
* perl module and utilities:
- Modules no longer magically scan system on initialization.
- Scanning is by calling explicit methods.
- "Serial" has been renamed "Label". It is basically unique, but
should be modifieble.
- Some basic documentation of zaptel perl modules.
* Default sort order of zt_registration is back to SORT_CONNCTOR.
* zt_registration proc file now shows the number of span registered to
if registered. Try: grep . /proc/xpp/XBUS-*/XPD-*/zt_registration
* genzaptelconf: Allow using a custom command instead of
/etc/init.d/asterisk to start/stop asterisk.
* Fixed the typo "Slagish".
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3506 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
distributions and allow simple overriding of file permissions.
Closes issue #11276 .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3493 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3475 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3445 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3441 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
report results of failure to initialize a VPMADT032 module all the way up the process, so that a card with a failed VPM won't be left in a partially-operational state
clean up early exits from wctdm_init_one() to undo all previously completed steps
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3430 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
that will only serve to confuse them
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3426 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Some other cleanups of uninstall-modules.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3424 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3420 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3415 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3411 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
with it again
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3407 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
initialization, we don't proceed and register with Zaptel. This will prevent
customers with faulty VPMADT032 modules from going undetected. Customers
can always load with vpmsupport=0 to proceed with this error but will do so
knowingly.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3405 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
without hardware echo cancellation modules installed. In case they actually
have one instead, we still report some info in debug mode to help find
where in the init the module failed for troubleshooting.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3400 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
can now accept both 5.3kb/s and 6.3kb/s (but will still only generate 6.3kb/s)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3389 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3386 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3377 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
weren't in subdirectories
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3375 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3373 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3370 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3368 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
drivers to use consistent methods
add non-hotplug firmware loading support to wctdm24xxp and wcte12xp
add license and copyright headers to various files that did not have them
clean up header inclusion in some files
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3365 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3363 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
------------------------------------------------------------------------
r3343 | kpfleming | 2007-12-07 13:39:05 -0600 (Fri, 07 Dec 2007) | 2 lines
as suggested by tzafrir on asterisk-dev, remove some code duplication when handling ZT_SPANCONFIG
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3361 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
TE121 and TE122 cards. These cards support the Digium VPMADT032 module.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3358 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3346 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
formats (6.3kb/s, 5.3kb/s and SID)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3327 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3321 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
4K stacks
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3263 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(closes issue #11352)
Reported by: brettcar
Patches:
ztdynamic.c.patch uploaded by eliel (license 64)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3258 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3243 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3241 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3232 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|