Age | Commit message (Collapse) | Author |
|
(needed for overriding the default EC in Debian m-a builds)
* Allow specifiying extra modules in the make command line:
MODULES_EXTRA and SUBDIRS_EXTRA
Merged revisions 2838 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2839 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 2836 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2837 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Marked with no. 4416, to note that major changes after 4415 were
note merged yet.
* Demote the messages about PCM in non-PCM from notice to debug (r4501).
* Fix sample BRI zapata.conf: NT instead of TE (r4498).
* Disable FXS hardware DTMF detection by default (r4492).
Merged revisions 2832 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2833 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2829 | mattf | 2007-08-10 16:54:56 -0500 (Fri, 10 Aug 2007) | 1 line
Make sure we permit MRM commands
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2830 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Issue 10255, initial patch by mirabilos, modified by me to work with 1.4.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2824 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Issue 10254, patch by mirabilos
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2821 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 2818 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2819 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Show Astribank 6+2 as 6/2 channels and not 8/8 channels.
- Added as a "subtype" to the device type (r4391).
* Fixed a panic in BRI span shutdown method (r4393).
* Changes to debug macros.
* Add proper sysfs support (r4406)
- A bus on whuch all of the Astribanks reside.
- Replaces useless sysfs code that existed in the module.
- Currently used to set the sync source automatically at device
adition / removal.
* BRI: We do need the T1 timer in NT. If it gets into G2 state (rr4407).
Merged revisions 2811 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2812 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2808 | qwell | 2007-08-01 15:21:04 -0500 (Wed, 01 Aug 2007) | 2 lines
Per Matt Fredrickson, we don't want to use GFP_KERNEL while holding a spinlock.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2809 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2807 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2806 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2251 | kpfleming | 2007-02-28 14:44:28 -0600 (Wed, 28 Feb 2007) | 2 lines
allow the HPEC to work even if echotraining has been requested (the HPEC doesn't do echotraining, but it shouldn't fail just because the user asked for it)
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2802 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Ignore two extra man pages on xpp/utils .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2797 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
........
r2789 | qwell | 2007-07-27 16:55:56 -0500 (Fri, 27 Jul 2007) | 3 lines
Rearrange and add some Makefile targets to be in line with the original intentions
of the addition of targets such as install-programs.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2790 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2787 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2781 | mattf | 2007-07-27 14:02:28 -0500 (Fri, 27 Jul 2007) | 1 line
Minor message removal
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2782 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
using the new firmware system.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2776 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
zaptel 1.2.19/1.4.4 - install on both /etc/default/zaptel and
/etc/sysconfig/zaptel .
Closes 0010257 .
(From branches/1.2 r2771)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2772 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2769 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2765 | mattf | 2007-07-20 14:17:25 -0500 (Fri, 20 Jul 2007) | 1 line
Add new 2.6.22 api updates
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2766 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2761 | mattf | 2007-07-20 11:19:47 -0500 (Fri, 20 Jul 2007) | 1 line
New product support, new echo canceler and new boards
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2762 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Evaluate PERLLIBDIR only once.
Closes: #10223 (Xorcom changeset:4379, from 1.2 r2758)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2759 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2756 | kpfleming | 2007-07-18 21:05:03 -0500 (Wed, 18 Jul 2007) | 2 lines
update to 2.6.22 request_irq() flags
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2757 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2754 | kpfleming | 2007-07-18 20:21:25 -0500 (Wed, 18 Jul 2007) | 2 lines
convert a few drivers over to current PCI module registration function
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2755 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2752 | kpfleming | 2007-07-18 20:02:53 -0500 (Wed, 18 Jul 2007) | 2 lines
don't try to timeslot-interchange channels that are being bridged (DACS) if either channel has a txgain or rxgain specified, since that gain won't be applied any longer if the DACS is put into effect
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2753 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
........
r2750 | file | 2007-07-18 13:27:04 -0300 (Wed, 18 Jul 2007) | 2 lines
A distribution may have multiple directories for firmware and without knowing the proper one we have to copy the firmware into each. We can't just copy it into the first one found.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2751 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2740 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward)
* Fix a critical race with zaptel synchronization (r4362)
* Added a /proc/xpp/cmds for statistics about command timing (r4360)
* Fix a digit mapping bug with hardware dtmf detection (r4357)
* In xpp/utils/Makefile add perl syntax checks to our scripts (r4337)
* Better USB data error checking (r4336)
* udev rules (xpp.rules) avoid false calls from wrong nodes (r4331)
* Improve hardware detection and reporting in lszaptel,
zaptel_hardware. zapconf is basically functional.
* Leds are blinked synchronously on all Astribanks now (r4262)
* Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258)
(This feature was not yet accepted into official zaptel)
* Removed compile warning about HZ != 1000 (r4218)
* Firmware updates.
* fpga_load now supports USB pathes without zeros (r4211)
* XPD numbers have changed to '<Unit><Subunit>' (r4196)
* Proper support for ZT_VMWI ioctl, if used in zaptel (r4092)
* Fix FXO power denial detection (r4054)
* FXO could accidentally go off-hook with some compilers (r4048)
(From branches/1.2 r2732, r2735)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2736 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* config target: Add a helpful text for the Zaptel installer.
(From branches/1.2 r2729)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2734 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
This was after the instructions on which kernel to install on CentOS
became a manual script with if-s and case-s.
Should work on Debian and CentOS.
(From branches/1.2 r2728, r2730)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2733 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Supress ugly text when /lib/modules/`uname -r` doesn't exist
(but we build for a different kernel)
(From branches/1.2 r2724)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2726 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2721 | qwell | 2007-07-11 13:14:11 -0500 (Wed, 11 Jul 2007) | 4 lines
tzafrir pointed out that this was put in the wrong place.
Move it so that asciidoc can properly parse it.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2722 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2717 | qwell | 2007-07-11 12:24:21 -0500 (Wed, 11 Jul 2007) | 7 lines
On some systems, sudo does not automatically add the PATH for root, so things like /sbin may not be in there,
which means chkconfig may not be found.
Add a note stating this.
Issue 10181.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2718 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2714 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2712 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Update README accordingly.
* Continue documenting Zaptel, while we're updating the README.
* Ignore the generated README.html.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2711 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2707 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Add makefile target to generate README.html from README with asciidoc.
Note: At least for now the ability to generate a nice extra HTML copy of
the text README is an extra feature. But the README file is meant to be
primarily read as a text file and will still be readable as such till
further notice.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2706 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
their style.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2703 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2696 | qwell | 2007-07-05 13:08:53 -0500 (Thu, 05 Jul 2007) | 5 lines
Do not report channels in ZT_STATE_KEWL or ZT_STATE_AFTERKEWL (ie; battery drop) states as available.
This becomes more likely if ZT_KEWLTIME or ZT_AFTERKEWLTIME are set to higher values.
Issue 7612, patch by rbraun.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2697 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
And all of them simply supressed errors, so they were replaced with
2> /dev/null .
(from branches/1.2 r2689)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2690 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2688 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2683 | qwell | 2007-07-03 13:57:42 -0500 (Tue, 03 Jul 2007) | 4 lines
Fix a potential issue with the reversepolarity module option in wctdm.
Issue 7191, patch by Thomas Andrews.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2684 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2680 | mattf | 2007-07-03 11:39:34 -0500 (Tue, 03 Jul 2007) | 1 line
Fix for span shutdown issue
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2681 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2675 | file | 2007-07-02 12:56:18 -0300 (Mon, 02 Jul 2007) | 2 lines
Add support for the 2.6.22 kernel. (issue #10095 reported by Matti)
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2676 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Add optional support for using the zaptel perl functions.
(From branches/1.2 changesset:2670 and changeset:2673)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2674 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
management stuff... 'tsk 'tsk. (issue #10093 reported by snuffy)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2671 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2669 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Further removed obsolete sections.
* Section about the perl stuff added.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2664 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2662 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|