Age | Commit message (Collapse) | Author |
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3298 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
can output that information
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3294 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3293 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
contain anything the GUI needs and one user is concerned about the 'totalspans' number having to be kept in sync if the output is edited
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3291 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3290 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
including the presence of a VPM in the result
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3285 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
absence of a VPM in the result
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3284 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
spans can have dynamically set device types instead of constant strings
also fix up some string creation and copying to be safe against buffer overflows
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3281 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3280 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
called 'ztscan'. this tool outputs an Asterisk-style
configuration file containing one context for each Zaptel span with all the details that can be learned about that span. to
enable this tool, the ZT_SPANSTAT ioctl gained a number of new elements to report information about the spans:
- linecompat (available signaling modes for digital spans)
- spantype (T1, E1 or J1 for digital spans)
- location (PCI/PCI-Express location)
- manufacturer
- devicetype
Along the way I also found that the digital span drivers always set T1-style signaling bits in 'linecompat' even for E1 spans,
and that the ZT_SPANCONFIG ioctl did not properly check these bits when configuring E1 spans. The result of this is that it was
possible to configure T1-only coding/framing (AMI/B8Zs, D4/ESF) on E1 spans (but not the reverse); this has been corrected and
any attempt to use T1-only coding/framing on E1 spans will now result in an error from ztcfg.
Also did some minor simplification of the Makefile rules that build the userspace tools.
(the basics of ztscan were written by Brandon Kruse then reworked and fleshed out by me)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3278 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Prevents conflicts in case the location of the driver changes
when upgrading from an older version of the driver.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3271 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3267 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3263 | mattf | 2007-11-30 14:17:42 -0600 (Fri, 30 Nov 2007) | 1 line
Make sure we only disable irqs during octasic firmware load only if we have 4K stacks
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3264 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3258 | file | 2007-11-28 18:52:54 -0400 (Wed, 28 Nov 2007) | 6 lines
Pass the correct variable to sizeof when copying the driver name.
(closes issue #11352)
Reported by: brettcar
Patches:
ztdynamic.c.patch uploaded by eliel (license 64)
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3259 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3245 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3243 | mattf | 2007-11-21 17:51:48 -0600 (Wed, 21 Nov 2007) | 1 line
Add new product support
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3244 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3241 | mattf | 2007-11-21 16:45:32 -0600 (Wed, 21 Nov 2007) | 1 line
Transcoder driver updates. Fixes G.723 no audio issues with latest drivers
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3242 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Fix a deadlock spotted on some SMP installations.
* Improve (reduce) signal attenuation on FXO ports.
* Increase FXS ring detect debounce interval.
Merged revisions 3229-3232 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3233 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3226 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
And also give a more useful conversion message.
Merged revisions 3222 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3223 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Reported by: dimas
Patch by: tilghman
Closes issue #11199
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3221 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
install (this causes an invalid install command).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3220 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3219 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* zaptel-perl: Fix reporting of empty slots in analog Digium cards.
* genzaptelconf: More readable case-s.
Merged revisions 3217 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3218 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3215 | mattf | 2007-11-06 15:13:09 -0600 (Tue, 06 Nov 2007) | 1 line
Cross port fxo line voltage monitoring patch from wctdm to wctdm24xxp
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3216 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
channel lockups, etc. It also raises the maximum channel count for g.729 to 120 channels.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3211 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3205 | mmichelson | 2007-10-31 16:08:15 -0500 (Wed, 31 Oct 2007) | 5 lines
Fixed potential buffer overflow.
See AST-2007-024 for more details
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3206 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3202 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
to be linked into the same module.
That dependency existed solely for checking target binary properties in
make_firmware_object . Those properties are now checked in autoconf.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3198 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Can be manually overriden in configure or make.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3195 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
build with the local zaptel.h . Otherwise you may mix two versions of
Zaptel .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3190 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3188 | mattf | 2007-10-26 10:08:37 -0500 (Fri, 26 Oct 2007) | 1 line
Another clock polarity update. To fix garbage audio on some systems with the wctdm24xxp driver and VPMADT032
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3189 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3185 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3169 | qwell | 2007-10-18 17:56:14 -0500 (Thu, 18 Oct 2007) | 4 lines
Correct the name of the wct4xxp driver.
Issue 11030
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3170 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
slips, instead of everytime we service the framer
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3161 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 3157 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3158 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
#11020).
* Don't build metering by default for now.
* And this is xpp rev 4900.
* Make opermode work again.
Merged revisions 3152-3153 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3154 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3147 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Zaptel/Hardware perl modules:
- Use sysfs directly. Don't rely on lspci/lsusb.
- Each device has a description and driver name.
- Zaptel::Hardware::drivers() to show the list of required drivers
for this system (see zaptel_drivers).
- zaptel_hardware shows a description and a (suggested?) driver.
* zt_registration sorts by Serial first and only then by connector.
* USB_FW.hex replaces all the USB_11x0.hex .
- Separate USB interface for the management processor.
- Hence fpga_load can now work even with drivers loaded.
* Fix firmware upgrading.
* Fix manual firmware loading while auto-loading.
Merged revisions 3142 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3143 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3139 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3132 | mattf | 2007-10-12 17:19:58 -0500 (Fri, 12 Oct 2007) | 1 line
Fix for false power alarms, as well as a clock polarity issue
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3133 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3121 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(which is our scripts directory).
* Don't run/print install command when there's nothing to install.
* Fix install_prereq command in README .
Merged revisions 3109-3112 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3113 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* New firmware protocol version: 2.9 .
* fpga_load: initial clean-ups before interface split.
* genzaptelconf: Don't leave an empty directory behind (4784)
* Increase xpp poll_timeout to 1000ms - useful for CentOS 4 (r4781).
* Fix initialization anoyance: if AB don't answer to polls, don't
waitfor_xpds, and show no waiting XPDs (r4725).
* Disable dtmf_detect by default once again (r4712).
* Don't check twice for asterisk to stop. The second test was done
while Asterisk was still stopping (r4708).
* Support building the kernel with M= instead of with SUBDIRS= , as
used in some newer build systems (r4677).
Merged revisions 3105 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3106 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3100 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* spacing.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3097 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3094 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
is already running.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3090 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 3084 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3087 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3082 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|