Age | Commit message (Collapse) | Author |
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4494 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4493 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4492 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
- In dahdi_transcode.c, Embed the identifiation number, assigned sequentially
when the transcoders are registered, in the transcoder structure. This allows
DAHDI_TC_GETINFO to work as expected even though the transcoders are rotated
on the list in order to spread the load.
- In wctc4xxp, fix bug where all transcoders are named tc400b0.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4491 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
and /lib/firmware in $(DESTDIR) if hotplug firmware is being installed
work around a GNU make buglet that caused some target rules not to match
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4490 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
While r4476 solved some parsing problems of channels with "strange"
encoding names, it introduced a new problem (e.g.: "RED" after "(In
use)" which is fixed here.
Merged revisions 4488 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4489 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4486 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4487 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
This is only an issue with the displayed value. In case you wondered why
you have battery voltage of more than 220V.
Merged revisions 4484 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4485 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4483 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4482 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4481 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4480 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4479 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
install firmware.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4478 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
improved version here too
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4477 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Parse them from a list rather thna fusing a regex of a "word".
Merged revisions 4475 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4476 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Do initialize xsp. Closes issue #13276 .
* xbus_core_shutdown can't be __exit as it is used in initilization as
well.
Merged revisions 4473 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4474 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4468 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4472 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
card has been completely redesigned, and the new interface will only be present in DAHDI; TC400 users will need to upgrade to DAHDI 2.0.0 to continue using their transcoder cards
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4469 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Uses newer firmware (5975) for the 1151 alone.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4463 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4462 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Also fix a typo in card_fxs.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4461 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4458 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4459 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
http://svn.digium.com/svn/zaptel/branches/1.2
........
r4451 | tzafrir | 2008-08-04 18:11:01 +0300 (Mon, 04 Aug 2008) | 9 lines
Firmware update: 5959 (DTMF and BRI ID)
(From DAHDI rev. 4695)
* Fix some cases of double digits.
* Fix some rare cases of a BRI unit providing incorrect directionality.
* Extra debugging code in card_fxs.c to trace future DTMF issues.
* Properly note DAHDI (as opposed to Zaptel) ioctls.
........
r4452 | tzafrir | 2008-08-04 18:36:19 +0300 (Mon, 04 Aug 2008) | 2 lines
Make it formally bashism.
........
r4453 | tzafrir | 2008-08-04 18:38:10 +0300 (Mon, 04 Aug 2008) | 2 lines
Kbuild: A more robust check for the bri_dchan patch.
........
r4454 | tzafrir | 2008-08-04 18:39:01 +0300 (Mon, 04 Aug 2008) | 2 lines
Minor BRI initlization improvements.
........
r4455 | tzafrir | 2008-08-04 18:43:32 +0300 (Mon, 04 Aug 2008) | 7 lines
Add channel alarms in Zaptel-perl and lszaptel specifically.
* Zaptel::Chans now provides a method alarms() for a list (or number of)
alarms.
* lszaptel uses it for a more correct display of channel status.
* Also update PCI hardware list.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4456 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
This function only needs the device as its parameter.
(Note that r4448 has already been fixed in 1.4)
Merged revisions 4447 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4449 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
........
r4442 | russell | 2008-08-01 08:50:24 -0500 (Fri, 01 Aug 2008) | 12 lines
Fix detection of ringing on FXO ports. This change was made to wctdm in 1.4
in revision 4096, but when that code got backported to 1.2 in rev 4132, the
change was not made. I found it just by comparing the differences in the
drivers between 1.2 and 1.4.
(closes issue #13188)
Reported by: pyves
Patches:
20080731__issue13188_revert4123z12.diff uploaded by bbryant (license 36)
issue13188.patch1.txt uploaded by russell (license 2)
Tested by: russell, bbryant
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4443 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4440 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4438 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
files during 'install-include' as well
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4432 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4429 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
4522. For issue #12944 .
Merged revisions 4424 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4426 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4425 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
actually gets carried down to the subprocesses... don't know why this ever worked, it shouldn't have :-)
(closes issue #12750)
Reported by: atis
Tested by: tzafrir, atis
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4421 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
After this change, the echo-canceler buffers were not cleared
in some cases. As a result when one FXS is put ONHOOK, the other side
could hear noise for a second or two until full disconnect is done.
Merged revisions 4407 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4408 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4404 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
name to make it less easy to accidentally duplicate, only search directories where we expect that DAHDI or Zaptel modules might be found (known installation locations, even old ones), and always uninstall old Zaptel modules before installing new ones, in case a module is no longer in the tree and shouldn't be left installed
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4401 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Makefile hw to uninstall DAHDI kernel modules if they are installed
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4398 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Issue may prevents ONHOOK detection.
Merged revisions 4394 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4395 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4391 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4387 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
rebuilt twice every time 'make' is run to build modules
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4384 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
infinite loop; in passing, do some validation of the passed options to keep users from requesting incompatible modes and getting useless output files
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4381 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
dahdi/zaptel .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4377 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
test-build various kernels.
test_kernel_git: small fixes. Mainly using 'make distclean' in setver.
Closes issue #12135 .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4375 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Clean, in order to guarantee everything belongs to this version/build .
* "test" is now "build".
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4372 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4367 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4368 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4363 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4360 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
- don't actually install hotplug firmware just because it has been downloaded... wait until hotplug-install is requested
- ensure that tag files aren't removed and recreated unless the firmware file was successfully installed
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4356 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(From xpp r5796).
Merged revisions 4352 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4353 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|