Age | Commit message (Collapse) | Author |
|
* New firmware protocol version: 3.0 .
* New numbers for the device types: (e.g. in card_init* scripts)
- FXS: 1 (was: 3)
- FXO: 2 (was: 4)
- BRI: 3 (was: 6 for TE, 7 for NT)
- PRI: 4 (was: 9)
* Init scripts of FXS and FXO modules are now written in Perl as well
(be sure to have File::Basename, e.g: perl-modules in Debian).
* calibrate_slics merged into init_card_1_30 .
* Module parameter print_dbg replaced with debug . Same meaning.
* init_fxo_modes removed: content moved into init_card_2_30, verified
at build time.
* Code tested with sparse. Most warnings were fixed.
* Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get
ignored by ztscan.
* Handle null config_desc we get from some crazy USB controllers.
* genzaptelconf: Fix reporting of empty slots in list mode.
* xpp_blink can now blink a single analog port.
* "slics" has been renamed "chipregs".
* Fixed a small typo in fpga_load(8).
* Fixed bashism in xpp_fxloader.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4264 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Remove some false alarms on T1-s (r5669) .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4234 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Sadly the change of CFLAGS handling in kernel 2.6.24 meant that it is no
longer as easy to invoke cpp on our own.
Impact: On kernel >= 2.6.24, xpd_bri never got built, even if the
bri_dchan patch was applied.
Fix: use a simpler grep instead. Hopefully noone passes it through other
means. This should fix issue #12426 .
(Backport of r4193 from branches/1.4)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4233 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
the wctdm driver was no longer properly recognizing polarity reversals.
(closes issue #12419)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4194 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4174 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4164 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4158 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4157 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4138 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4136 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4/kernel/wctdm.c .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4132 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4/kernel/wctdm24xxp wctdm24xxp
svn merge -c4096 https://origsvn.digium.com/svn/zaptel/branches/1.4/kernel/wcte12xp wcte12xp
svn cp https://origsvn.digium.com/svn/zaptel/branches/1.4/kernel/voicebus.c .
svn cp https://origsvn.digium.com/svn/zaptel/branches/1.4/kernel/voicebus.h .
svn cp https://origsvn.digium.com/svn/zaptel/branches/1.4/kernel/fxo_modes.h .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4129 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
svn merge -c3701 https://origsvn.digium.com/svn/zaptel/branches/1.4 .
svn merge -c3703 https://origsvn.digium.com/svn/zaptel/branches/1.4 .
svn merge -c4050 https://origsvn.digium.com/svn/zaptel/branches/1.4/kernel .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4128 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4127 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4126 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4118 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
from 1.4.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4117 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4109 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Nobody has that older udev version (or otherwise we might have recieved
a bug report about a bogus == rule).
TODO: fix the UDEVRULES test in Makefile.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4085 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
which should have already been merged in.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4072 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Make sure everything's initialized in hdlctest.c .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4038 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4037 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Fix zaptel-perl reporting of battery after procfs changes.
* Documentation updates.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4036 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4028 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4025 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* But no need to cancel echo on channels without PCM.
* Switch to FXS hardware DTMF detection again.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4012 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3988 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3972 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
documentation.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3968 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Build:
- Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/*
- We conditionally use old/new directory scheme:
In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's
not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well).
- Fix compile warnings on 64 bit systems.
- Compile fixes for kernel-2.6.24
* UDEV:
- /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook.
- astribank_hook: Modify to do nothing. Add some documentation.
* Autoconfiguration -- zapconf:
- Don't fail zapconf et.al. if no config file was found.
- Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?).
- Add some newer Digium cards to our hardware inventory.
- Partially handle cases where the /proc/zaptel strings does not contain
info about E1/T1/J1 or NT/TE.
* Better SYNC:
- Finer tuning of PLL (New firmware).
- Change calculation algorithm of sync offset. It now copes better
with the variance in USB frame reception timing.
- Statistics:
. The view of results was moved from /proc/xpp/XBUS-*/summary to
a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced.
. A new xpp_timing script shows all astribanks.
. A new write only /sys/bus/astribanks/devices/xbus-*/cls is
used to clear statistics. Eventually, clearing of XBUS related
statistics should be done here. One that was migrated is the
clearing of 'PCM [TR]X:' numbers currently appearing in
/proc/xpp/XBUS-*/summary (they should be moved too later).
- Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB")
adapted their use in printk and /proc so the text is clear.
- Added a command line parameter xpp.disable_pll_sync to stop all
adjustments command to AB (calculations still continue as usual).
* PRI:
- 4 port support
- set clocking master span via ztcfg, like other zaptel devices.
* FXO:
- Fix false hangups in some countries (voltage fluctuations).
- Some countries send caller-id before first ring.
Added code to handle caller-id PCM pass through according to
a new command line parameter (xpd_fxo.caller_id_style).
- No longer sends an event on zt_open. See #12160 .
* Misc:
- Adapt to zaptel-1.4.8 and above ztscan: added fields returend by
new ZT_SPANSTAT_V2 ioctl()
- Document sysfs and waitfor_xpds.
- Miscelaneous optimizations and bugfixes.
- Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has
replaced it a long time ago.
- Add RX_CMD counter to /proc/xpp/XBUS-*/summary
- Unclutter some of the usb disconnect messages.
- xpp_usb: minor preformance improvements in receive.
Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3952 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3951 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Closes issue #12118 .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3917 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3847 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Update the hardware supported by xpp.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3837 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(added to zaptel.h) to fix any off by one errors and ensure destination string is NULL terminated.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3833 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3831 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
right location. Fixes building for kernels 2.6.0 - 2.6.9 .
M 1.2/Makefile
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3812 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
- replace change to allow driver to recover from descriptor
unavailable.
- module echo cancellation parameters now valid under 2.6 kernels.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3805 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3804 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3766 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3753 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
including it.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3747 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(issue #11523)
Reported by: tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3744 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r3706 from tzafrir for branch-1.4)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3741 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(issue #7620)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3733 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3730 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3710 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
can see any reason why this would be required.
(closes issue #10791)
Reported by: Matti
Patches:
patch uploaded by Matti (license 109)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3663 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3660 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|