Age | Commit message (Collapse) | Author |
|
* This byte wasn't shown even if do_datah bit was set.
* Also converged all terminology to "sub-register" and not "indirect"
* Changed accordingly '[WR]I' to [WR]S' in code.
* Still allow usage of '[WR]I' but with deprecation NOTICE()
* Convert init_card_* scripts
* Adapt show_regs and write_regs script accordingly.
* Leave FXS internal macros with ...INDIRECT... because that's the
terminology of the SLIC.
* You should use both the newer driver and init script. Specifically:
newer init script will fail to work with older BRI and FXS xpp driver
loaded.
From xpp rev. 6117.
Merged revisions 4520 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4531 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
http://svn.digium.com/svn/zaptel/branches/1.2
........
r4451 | tzafrir | 2008-08-04 18:11:01 +0300 (Mon, 04 Aug 2008) | 9 lines
Firmware update: 5959 (DTMF and BRI ID)
(From DAHDI rev. 4695)
* Fix some cases of double digits.
* Fix some rare cases of a BRI unit providing incorrect directionality.
* Extra debugging code in card_fxs.c to trace future DTMF issues.
* Properly note DAHDI (as opposed to Zaptel) ioctls.
........
r4452 | tzafrir | 2008-08-04 18:36:19 +0300 (Mon, 04 Aug 2008) | 2 lines
Make it formally bashism.
........
r4453 | tzafrir | 2008-08-04 18:38:10 +0300 (Mon, 04 Aug 2008) | 2 lines
Kbuild: A more robust check for the bri_dchan patch.
........
r4454 | tzafrir | 2008-08-04 18:39:01 +0300 (Mon, 04 Aug 2008) | 2 lines
Minor BRI initlization improvements.
........
r4455 | tzafrir | 2008-08-04 18:43:32 +0300 (Mon, 04 Aug 2008) | 7 lines
Add channel alarms in Zaptel-perl and lszaptel specifically.
* Zaptel::Chans now provides a method alarms() for a list (or number of)
alarms.
* lszaptel uses it for a more correct display of channel status.
* Also update PCI hardware list.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4456 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* New firmware protocol version: 3.0 .
* New numbers for the device types: (e.g. in card_init* scripts)
- FXS: 1 (was: 3)
- FXO: 2 (was: 4)
- BRI: 3 (was: 6 for TE, 7 for NT)
- PRI: 4 (was: 9)
* Init scripts of FXS and FXO modules are now written in Perl as well
(be sure to have File::Basename, e.g: perl-modules in Debian).
* calibrate_slics merged into init_card_1_30 .
* Module parameter print_dbg replaced with debug . Same meaning.
* init_fxo_modes removed: content moved into init_card_2_30, verified
at build time.
* Code tested with sparse. Most warnings were fixed.
* Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get
ignored by ztscan.
* Handle null config_desc we get from some crazy USB controllers.
* genzaptelconf: Fix reporting of empty slots in list mode.
* xpp_blink can now blink a single analog port.
* "slics" has been renamed "chipregs".
* Fixed a small typo in fpga_load(8).
* Fixed bashism in xpp_fxloader.
Merged revisions 4264 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4266 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|