Age | Commit message (Collapse) | Author |
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4635 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Sun Mar 1 2009 Oron Peled <oron@actcom.co.il> - xpp.r6795
* Fix cases where the command_queue overflowed during initialization.
- Also add a 'command_queue_length' parameter to xpp.ko
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
- New 'offhook' attribute in:
/sys/bus/xpds/devices/??:?:?/offhook
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
Mon, Dec 8 2008 Oron Peled <oron@actcom.co.il> - xpp.r6430
* PRI:
- Match our span clocking priorities (in system.conf)
to Digium -- this is a reversal of the previous state.
Now lower numbers (greater than 0) are better.
- Synchronization fixes for PRI ports other than 0.
- Fix T1 CRC for some countries (e.g: China).
* FXS: fix bug in VMWI detection if using old asterisk
which does not provide ZT_VMWI ioctl().
* FXO:
- Improve caller_id_style module parameter. This provide a workaround
for countries that send this information without any notification
(reverse polarity, ring, etc.)
- Don't force on-hook upon power-denial. So, loopstart devices
would ignore these as expected.
* Implement a flow-control to prevent user space (init_card_* scripts)
from pressuring our command queue.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4631 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4512 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4514 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
While r4476 solved some parsing problems of channels with "strange"
encoding names, it introduced a new problem (e.g.: "RED" after "(In
use)" which is fixed here.
Merged revisions 4488 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4489 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Parse them from a list rather thna fusing a regex of a "word".
Merged revisions 4475 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4476 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
http://svn.digium.com/svn/zaptel/branches/1.2
........
r4451 | tzafrir | 2008-08-04 18:11:01 +0300 (Mon, 04 Aug 2008) | 9 lines
Firmware update: 5959 (DTMF and BRI ID)
(From DAHDI rev. 4695)
* Fix some cases of double digits.
* Fix some rare cases of a BRI unit providing incorrect directionality.
* Extra debugging code in card_fxs.c to trace future DTMF issues.
* Properly note DAHDI (as opposed to Zaptel) ioctls.
........
r4452 | tzafrir | 2008-08-04 18:36:19 +0300 (Mon, 04 Aug 2008) | 2 lines
Make it formally bashism.
........
r4453 | tzafrir | 2008-08-04 18:38:10 +0300 (Mon, 04 Aug 2008) | 2 lines
Kbuild: A more robust check for the bri_dchan patch.
........
r4454 | tzafrir | 2008-08-04 18:39:01 +0300 (Mon, 04 Aug 2008) | 2 lines
Minor BRI initlization improvements.
........
r4455 | tzafrir | 2008-08-04 18:43:32 +0300 (Mon, 04 Aug 2008) | 7 lines
Add channel alarms in Zaptel-perl and lszaptel specifically.
* Zaptel::Chans now provides a method alarms() for a list (or number of)
alarms.
* lszaptel uses it for a more correct display of channel status.
* Also update PCI hardware list.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4456 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Minor changes to Zaptel::Xpp as well.
(Documentation-only changes. xpp r5746,r5747)
Merged revisions 4308 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4309 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* New firmware protocol version: 3.0 .
* New numbers for the device types: (e.g. in card_init* scripts)
- FXS: 1 (was: 3)
- FXO: 2 (was: 4)
- BRI: 3 (was: 6 for TE, 7 for NT)
- PRI: 4 (was: 9)
* Init scripts of FXS and FXO modules are now written in Perl as well
(be sure to have File::Basename, e.g: perl-modules in Debian).
* calibrate_slics merged into init_card_1_30 .
* Module parameter print_dbg replaced with debug . Same meaning.
* init_fxo_modes removed: content moved into init_card_2_30, verified
at build time.
* Code tested with sparse. Most warnings were fixed.
* Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get
ignored by ztscan.
* Handle null config_desc we get from some crazy USB controllers.
* genzaptelconf: Fix reporting of empty slots in list mode.
* xpp_blink can now blink a single analog port.
* "slics" has been renamed "chipregs".
* Fixed a small typo in fpga_load(8).
* Fixed bashism in xpp_fxloader.
Merged revisions 4264 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4266 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(Accidentally left out of the merge from 1.2)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4187 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4138 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4139 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Fix zaptel-perl reporting of battery after procfs changes.
* Documentation updates.
* Block hdlcstress/test fixes that followed: already merged.
Merged revisions 4036 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4039 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Build:
- Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/*
- We conditionally use old/new directory scheme:
In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's
not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well).
- Fix compile warnings on 64 bit systems.
- Compile fixes for kernel-2.6.24
* UDEV:
- /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook.
- astribank_hook: Modify to do nothing. Add some documentation.
* Autoconfiguration -- zapconf:
- Don't fail zapconf et.al. if no config file was found.
- Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?).
- Add some newer Digium cards to our hardware inventory.
- Partially handle cases where the /proc/zaptel strings does not contain
info about E1/T1/J1 or NT/TE.
* Better SYNC:
- Finer tuning of PLL (New firmware).
- Change calculation algorithm of sync offset. It now copes better
with the variance in USB frame reception timing.
- Statistics:
. The view of results was moved from /proc/xpp/XBUS-*/summary to
a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced.
. A new xpp_timing script shows all astribanks.
. A new write only /sys/bus/astribanks/devices/xbus-*/cls is
used to clear statistics. Eventually, clearing of XBUS related
statistics should be done here. One that was migrated is the
clearing of 'PCM [TR]X:' numbers currently appearing in
/proc/xpp/XBUS-*/summary (they should be moved too later).
- Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB")
adapted their use in printk and /proc so the text is clear.
- Added a command line parameter xpp.disable_pll_sync to stop all
adjustments command to AB (calculations still continue as usual).
* PRI:
- 4 port support
- set clocking master span via ztcfg, like other zaptel devices.
* FXO:
- Fix false hangups in some countries (voltage fluctuations).
- Some countries send caller-id before first ring.
Added code to handle caller-id PCM pass through according to
a new command line parameter (xpd_fxo.caller_id_style).
- No longer sends an event on zt_open. See #12160 .
* Misc:
- Adapt to zaptel-1.4.8 and above ztscan: added fields returend by
new ZT_SPANSTAT_V2 ioctl()
- Document sysfs and waitfor_xpds.
- Miscelaneous optimizations and bugfixes.
- Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has
replaced it a long time ago.
- Add RX_CMD counter to /proc/xpp/XBUS-*/summary
- Unclutter some of the usb disconnect messages.
- xpp_usb: minor preformance improvements in receive.
Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb
Merged revisions 3952 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3957 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3939 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(merged branch /zaptel/team/tzafrir/move )
Closes issue #7117.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3793 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|