Age | Commit message (Collapse) | Author |
|
Clock synchronization when sync is not from first port.
Merged revisions 4583 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4584 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
The BIOSes included in a number of motherboards could hang from an
Astribank firmware newer than 1.2.20.1 / 1.4.5.1 . This was due to an
some incorrect USB information in the firmware. This firmware fixes it.
Merged revisions 4580 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4581 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Fixes #13832 in Zaptel.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4578 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4572 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4571 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Only updates FPGA_1151.hex. Id: rev 6152. From xpp rev 6163.
Merged revisions 4544 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4545 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4533 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4534 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* This byte wasn't shown even if do_datah bit was set.
* Also converged all terminology to "sub-register" and not "indirect"
* Changed accordingly '[WR]I' to [WR]S' in code.
* Still allow usage of '[WR]I' but with deprecation NOTICE()
* Convert init_card_* scripts
* Adapt show_regs and write_regs script accordingly.
* Leave FXS internal macros with ...INDIRECT... because that's the
terminology of the SLIC.
* You should use both the newer driver and init script. Specifically:
newer init script will fail to work with older BRI and FXS xpp driver
loaded.
From xpp rev. 6117.
Merged revisions 4520 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4531 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Also rename the CID_STYLE_* constants to formal names.
From Xorcom Rev. 6115.
Merged revisions 4519 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4529 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* In case of any diff, exit with non-zero status so the build fails.
* Print filename:lineno of missing or changed lines.
* Fix two countries (typos fixed in COLOMBIA and CYPRUS).
* xpp-zaptel: FXO: cleanup opermode verification code (from DAHDI):
- Add proper '-v' option to init_card_2_30 and use it in xortel/Makefile
- Use $mismatches as in DAHDI (minimize diffs).
From xpp rev. 6107,6108
Merged revisions 4517-4518 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4524 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
controller.
From xpp rev. 6071.
Merged revisions 4516 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4523 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4512 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4514 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(closes issue #13277)
Reported by: smurfix
Patches:
zap-dev.patch uploaded by smurfix (license 547)
zap-sema.patch uploaded by smurfix (license 547)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4496 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4494 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
While r4476 solved some parsing problems of channels with "strange"
encoding names, it introduced a new problem (e.g.: "RED" after "(In
use)" which is fixed here.
Merged revisions 4488 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4489 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4486 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4487 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
This is only an issue with the displayed value. In case you wondered why
you have battery voltage of more than 220V.
Merged revisions 4484 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4485 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
improved version here too
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4477 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Parse them from a list rather thna fusing a regex of a "word".
Merged revisions 4475 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4476 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Do initialize xsp. Closes issue #13276 .
* xbus_core_shutdown can't be __exit as it is used in initilization as
well.
Merged revisions 4473 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4474 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4468 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4472 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
card has been completely redesigned, and the new interface will only be present in DAHDI; TC400 users will need to upgrade to DAHDI 2.0.0 to continue using their transcoder cards
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4469 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Uses newer firmware (5975) for the 1151 alone.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4463 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4462 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Also fix a typo in card_fxs.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4461 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4458 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4459 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
http://svn.digium.com/svn/zaptel/branches/1.2
........
r4451 | tzafrir | 2008-08-04 18:11:01 +0300 (Mon, 04 Aug 2008) | 9 lines
Firmware update: 5959 (DTMF and BRI ID)
(From DAHDI rev. 4695)
* Fix some cases of double digits.
* Fix some rare cases of a BRI unit providing incorrect directionality.
* Extra debugging code in card_fxs.c to trace future DTMF issues.
* Properly note DAHDI (as opposed to Zaptel) ioctls.
........
r4452 | tzafrir | 2008-08-04 18:36:19 +0300 (Mon, 04 Aug 2008) | 2 lines
Make it formally bashism.
........
r4453 | tzafrir | 2008-08-04 18:38:10 +0300 (Mon, 04 Aug 2008) | 2 lines
Kbuild: A more robust check for the bri_dchan patch.
........
r4454 | tzafrir | 2008-08-04 18:39:01 +0300 (Mon, 04 Aug 2008) | 2 lines
Minor BRI initlization improvements.
........
r4455 | tzafrir | 2008-08-04 18:43:32 +0300 (Mon, 04 Aug 2008) | 7 lines
Add channel alarms in Zaptel-perl and lszaptel specifically.
* Zaptel::Chans now provides a method alarms() for a list (or number of)
alarms.
* lszaptel uses it for a more correct display of channel status.
* Also update PCI hardware list.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4456 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
After this change, the echo-canceler buffers were not cleared
in some cases. As a result when one FXS is put ONHOOK, the other side
could hear noise for a second or two until full disconnect is done.
Merged revisions 4407 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4408 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Issue may prevents ONHOOK detection.
Merged revisions 4394 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4395 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4367 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4368 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(From xpp r5796).
Merged revisions 4352 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4353 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
changing the type from bool to unsigned long. (xpp r5756).
Merged revisions 4314 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4315 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Minor changes to Zaptel::Xpp as well.
(Documentation-only changes. xpp r5746,r5747)
Merged revisions 4308 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4309 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
compatibility kludge so it actually affect code (failed compilation on
zaptel-1.2 from Digium without (Closes issue #12654 ).
* Cleanup a compile warning in xpp/card_global.c .
* Fix regression in PRI init script (case of less than 4 modules).
* Update changelog and bump version.
Merged revisions 4304 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4305 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4271 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4272 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* New firmware protocol version: 3.0 .
* New numbers for the device types: (e.g. in card_init* scripts)
- FXS: 1 (was: 3)
- FXO: 2 (was: 4)
- BRI: 3 (was: 6 for TE, 7 for NT)
- PRI: 4 (was: 9)
* Init scripts of FXS and FXO modules are now written in Perl as well
(be sure to have File::Basename, e.g: perl-modules in Debian).
* calibrate_slics merged into init_card_1_30 .
* Module parameter print_dbg replaced with debug . Same meaning.
* init_fxo_modes removed: content moved into init_card_2_30, verified
at build time.
* Code tested with sparse. Most warnings were fixed.
* Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get
ignored by ztscan.
* Handle null config_desc we get from some crazy USB controllers.
* genzaptelconf: Fix reporting of empty slots in list mode.
* xpp_blink can now blink a single analog port.
* "slics" has been renamed "chipregs".
* Fixed a small typo in fpga_load(8).
* Fixed bashism in xpp_fxloader.
Merged revisions 4264 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4266 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Remove some false alarms on T1-s (r5669) .
Merged revisions 4234 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4235 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Sadly the change of CFLAGS handling in kernel 2.6.24 meant that it is no
longer as easy to invoke cpp on our own.
Impact: On kernel >= 2.6.24, xpd_bri never got built, even if the
bri_dchan patch was applied.
Fix: use a simpler grep instead. Hopefully noone passes it through other
means. This should hopfully fix issue #12426 .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4193 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(Accidentally left out of the merge from 1.2)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4187 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4164 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4165 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4138 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4139 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4109 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4110 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
as the fxo_modes.h file.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4101 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4100 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Fix zaptel-perl reporting of battery after procfs changes.
* Documentation updates.
* Block hdlcstress/test fixes that followed: already merged.
Merged revisions 4036 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4039 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* But no need to cancel echo on channels without PCM.
* Switch to FXS hardware DTMF detection again.
Merged revisions 4012 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4013 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Build:
- Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/*
- We conditionally use old/new directory scheme:
In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's
not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well).
- Fix compile warnings on 64 bit systems.
- Compile fixes for kernel-2.6.24
* UDEV:
- /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook.
- astribank_hook: Modify to do nothing. Add some documentation.
* Autoconfiguration -- zapconf:
- Don't fail zapconf et.al. if no config file was found.
- Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?).
- Add some newer Digium cards to our hardware inventory.
- Partially handle cases where the /proc/zaptel strings does not contain
info about E1/T1/J1 or NT/TE.
* Better SYNC:
- Finer tuning of PLL (New firmware).
- Change calculation algorithm of sync offset. It now copes better
with the variance in USB frame reception timing.
- Statistics:
. The view of results was moved from /proc/xpp/XBUS-*/summary to
a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced.
. A new xpp_timing script shows all astribanks.
. A new write only /sys/bus/astribanks/devices/xbus-*/cls is
used to clear statistics. Eventually, clearing of XBUS related
statistics should be done here. One that was migrated is the
clearing of 'PCM [TR]X:' numbers currently appearing in
/proc/xpp/XBUS-*/summary (they should be moved too later).
- Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB")
adapted their use in printk and /proc so the text is clear.
- Added a command line parameter xpp.disable_pll_sync to stop all
adjustments command to AB (calculations still continue as usual).
* PRI:
- 4 port support
- set clocking master span via ztcfg, like other zaptel devices.
* FXO:
- Fix false hangups in some countries (voltage fluctuations).
- Some countries send caller-id before first ring.
Added code to handle caller-id PCM pass through according to
a new command line parameter (xpd_fxo.caller_id_style).
- No longer sends an event on zt_open. See #12160 .
* Misc:
- Adapt to zaptel-1.4.8 and above ztscan: added fields returend by
new ZT_SPANSTAT_V2 ioctl()
- Document sysfs and waitfor_xpds.
- Miscelaneous optimizations and bugfixes.
- Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has
replaced it a long time ago.
- Add RX_CMD counter to /proc/xpp/XBUS-*/summary
- Unclutter some of the usb disconnect messages.
- xpp_usb: minor preformance improvements in receive.
Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb
Merged revisions 3952 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3957 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3939 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|