Age | Commit message (Collapse) | Author |
|
* Marked with no. 4416, to note that major changes after 4415 were
note merged yet.
* Demote the messages about PCM in non-PCM from notice to debug (r4501).
* Fix sample BRI zapata.conf: NT instead of TE (r4498).
* Disable FXS hardware DTMF detection by default (r4492).
Merged revisions 2832 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
Merged revisions 2833 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2834 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Show Astribank 6+2 as 6/2 channels and not 8/8 channels.
- Added as a "subtype" to the device type (r4391).
* Fixed a panic in BRI span shutdown method (r4393).
* Changes to debug macros.
* Add proper sysfs support (r4406)
- A bus on whuch all of the Astribanks reside.
- Replaces useless sysfs code that existed in the module.
- Currently used to set the sync source automatically at device
adition / removal.
* BRI: We do need the T1 timer in NT. If it gets into G2 state (r4407).
Merged revisions 2812 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
* Ignore generated files on the new wctdm24xxp dir. (from 1.2 r2796)
* Ignore two extra man pages on xpp/utils .
Merged revisions 2797 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
* Generate list of Zaptel Modules directories automatically.
* Evaluate PERLLIBDIR only once.
Closes: #10223 (Xorcom changeset:4379, from 1.2 r2758)
Merged revisions 2759 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2814 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward)
* Fix a critical race with zaptel synchronization (r4362)
* Added a /proc/xpp/cmds for statistics about command timing (r4360)
* Fix a digit mapping bug with hardware dtmf detection (r4357)
* In xpp/utils/Makefile add perl syntax checks to our scripts (r4337)
* Better USB data error checking (r4336)
* udev rules (xpp.rules) avoid false calls from wrong nodes (r4331)
* Improve hardware detection and reporting in lszaptel,
zaptel_hardware. zapconf is basically functional.
* Leds are blinked synchronously on all Astribanks now (r4262)
* Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258)
(This feature was not yet accepted into official zaptel)
* Removed compile warning about HZ != 1000 (r4218)
* Firmware updates.
* fpga_load now supports USB pathes without zeros (r4211)
* XPD numbers have changed to '<Unit><Subunit>' (r4196)
* Proper support for ZT_VMWI ioctl, if used in zaptel (r4092)
* Fix FXO power denial detection (r4054)
* FXO could accidentally go off-hook with some compilers (r4048)
(From branches/1.2 r2732, r2735 - branches/1.4 2736)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2813 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Tested with zaptel-1.2.17.1
* Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info
* Adjust output of xpp_sync script. Pad for 8 port BRI.
* Added a debugging module parport_debug (not compiled by default).
* Added an optional patch to zaptel:
- compiles only if ZAPTEL_SYNC_TICK is defined
- Allow interested driver to register for "sync" notification.
- Does not affect drivers that do not use this feature.
* Added external synchronization feature:
- Only if ZAPTEL_SYNC_TICK feature is compiled in
- Than XPP may be synchronized by another card (e.g: an Astribank
with FXS can be synchronized by a Digium PRI card).
- May be enabled/disabled in runtime via the 'sync_tick_active' module
parameter to the xpp.ko module.
* Fixed a potential bug in D-Channel hexdump printing.
* New visual indications in BRI leds:
- Constant ON RED/GREEN: Shows the port type -- NT/TE.
- Very fast "double blink": Layer1 work, no D-Channel yet.
- Steady blinking (1/2 sec): D-Channel trafic detected.
* xpp_fxloader moved to /usr/share/zaptel .
* adj_clock removed: never really used.
* Now we have Zaptel::Hardware and a sample zaptel_hardware script (not
(installed by default).
* We also have a sample perl zapconf (not installed by default) which
aims at replacing genzaptelconf (sans the modules detection).
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2537 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Protocol no. 2.6: syncing improvements.
* Support for 8-port Astribank BRI.
* Firmware unloading now works:
rmmod xpp_usb; /etc/hotplug/usb/xpp_fxloader reset
* Defaults of kernel parameters are now part of parameter description.
* World-readable kernel parameters.
* No need for extra patch beyond bristuff for Astribank BRI.
* Default poll intervals changed: 500 in BRI and FXO.
* Allow changing FXS polls interval at run time.
* BRI initalization fixed on SUSE (path to logger).
* When using the SUSE zaptel rpm package, set modules_var=ZAPTEL_MODULES in
/etc/sysconfig/zaptel .
* zt_registration not verbose by default.
* xpp_sync warns if FXO is sync slave.
* Fixed genzaptelconf -z (zapscan output emulation).
* PCM fixes.
* Solves "multiple ticks" bug. No need for pcm_tasklets workaround.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2478 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|