Age | Commit message (Collapse) | Author |
|
XPS Init scripts renamed accordingly.
* Performance improvements for multi-XPD (span) devices.
* Astribank BRI driver (in next commit).
* Changes under /proc:
- XBUS and XPD numbers have two digits.
- Every script wildcard should be replaced from XBUS-? to XBUS-[0-9]*
- Added /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop.
* Several countries (South Africa, UAE, anybody else) require a shorter
ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011.
* Use tasklets to move most of the interrupt PCM copying out of the interrupt.
* Debugfs-based code to dump data to userspace (used to debug BRI D channel).
* Pretend every 2.6.9 actually has later RHEL's typedefs.
* fpga_load supports /dev/bus/usb .
* Fixed physical order sorting in genzaptelconf.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1966 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r2847@boole: diego | 2006-12-03 10:33:00 +0200
added documentation which explains which packages are needed to build
the drivers on different distributions.
r2862@boole: tzafrir | 2006-12-05 08:43:50 +0200
README.Astribank: A typo in the sample config (changeset:2861).
r2891@boole: tzafrir | 2006-12-08 01:11:45 +0200
Re-accept changeset:2832 after all.
r2892@boole: tzafrir | 2006-12-08 02:46:07 +0200
Merge genzaptelconf changeset:2866 from trunk:
* Zapata comment on unidentified channel goes to $zapata_file
* Correct pattern for Sangoma A200 card's channels.
r2893@boole: tzafrir | 2006-12-08 03:11:37 +0200
genzaptelconf:
* Add options xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel.
* Do print the original line for every channel.
r2909@boole: tzafrir | 2006-12-10 20:03:59 +0200
Add some sleeps in older kernels in the firmware loading script.
r2932@boole: tzafrir | 2006-12-14 17:30:12 +0200
Make the warning about a call to off-hook FXO debug. At least if we
cannot suppress it at module load time.
r2933@boole: tzafrir | 2006-12-14 17:32:00 +0200
Don't redefine 'bool' on newer kerenls to fix building with kernel
2.6.19. Taken from Digium tree.
(from changeset:2930)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1718 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
genzaptelconf: A list of countries for which to use busydetect.
(backport of changeset:2829)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1667 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Maintenance branch for asterisk-1.2.x
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1666 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
defaults.
* genzaptelconf: Don't check for zap_autoreg in wait_for_xpp .
* genzaptelconf: Add support for fxs_immediate: option to set FXS port as
immediate.
* genzaptelconf: Fix few left over writes to stdout for config files.
* genzaptelconf: Documentation fixes.
* genzaptelconf.8: bring up-to-date.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1559 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* E1 spans should not be configured as "national". TODO: find a better default
* Add support for Sangoma A102 (Hopefully also all A10x) PRI cards:
-d won't work, but will configure existing spans.
* Better comments in genconf()
* Removing update_extensions_defs: cleaning temporary files is only done once.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1495 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Hopefully correct PRI setting for country=cl
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1494 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
using the variable ASTERISK_INIT_SCRIPT (from the config file or from
the environment).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1493 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1457 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1229 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1228 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1227 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* FPGA firmware now loaded from PC (for newer models)
* Driver for the FXO module (xpd_fxo.ko)
* Moved most userspace files to the subdirectory utils (see also next commit)
* Explicit license for firmware files
* Optionally avoid auto-registration
* Registers initializations code is done by a userspace script.
* Remove obsolete .inc initialization files (we use user-space init)
* Added an install target to the utils dir.
* Updated README.Astribank accordingly.
* Using RBS signalling, as caller ID did not work well otherwise.
* Better handling of USB protocol errors.
* Fixed some procfs-related races.
* per-card-module ioctls.
* fxotune support.
* opermode support (set through /etc/default/zaptel for now)
* Userspace initialization script can also read registers.
* Power calibration works (and implemented in perl)
* some fine-tuning to the regster initialization parameters.
* Leds turn on before registration and turn off after it.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1212 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|