Age | Commit message (Collapse) | Author |
|
* Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info
* Adjust output of xpp_sync script. Pad for 8 port BRI.
* Added a debugging module parport_debug (not compiled by default).
* Added an optional patch to zaptel:
- compiles only if ZAPTEL_SYNC_TICK is defined
- Allow interested driver to register for "sync" notification.
- Does not affect drivers that do not use this feature.
* Added external synchronization feature:
- Only if ZAPTEL_SYNC_TICK feature is compiled in
- Than XPP may be synchronized by another card (e.g: an Astribank
with FXS can be synchronized by a Digium PRI card).
- May be enabled/disabled in runtime via the 'sync_tick_active' module
parameter to the xpp.ko module.
* Fixed a potential bug in D-Channel hexdump printing.
* New visual indications in BRI leds:
- Constant ON RED/GREEN: Shows the port type -- NT/TE.
- Very fast "double blink": Layer1 work, no D-Channel yet.
- Steady blinking (1/2 sec): D-Channel trafic detected.
* xpp_fxloader moved to /usr/share/zaptel .
* adj_clock removed: never really used.
* Debugfs code now disabled by default.
* Now we have Zaptel::Hardware and a sample zaptel_hardware script (not
(installed by default).
* We also have a sample perl zapconf (not installed by default) which
aims at replacing genzaptelconf (sans the modules detection).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2529 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Protocol no. 2.6: syncing improvements.
* Support for 8-port Astribank BRI.
* Firmware unloading now works:
rmmod xpp_usb; /etc/hotplug/usb/xpp_fxloader reset
* Defaults of kernel parameters are now part of parameter description.
* World-readable kernel parameters.
* No need for extra patch beyond bristuff for Astribank BRI.
* Default poll intervals changed: 500 in BRI and FXO.
* Allow changing FXS polls interval at run time.
* BRI initalization fixed on SUSE (path to logger).
* When using the SUSE zaptel rpm package, set modules_var=ZAPTEL_MODULES in
/etc/sysconfig/zaptel .
* zt_registration not verbose by default.
* xpp_sync warns if FXO is sync slave.
* Fixed genzaptelconf -z (zapscan output emulation).
* PCM fixes.
* Solves "multiple ticks" bug. No need for pcm_tasklets workaround.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2475 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(and actually work, this tine).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2252 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Version of xpp modules is set from xpp/.version, rather than "unknown".
* Astribank devices are now initialized in parallel: faster startup
when there are multiple Astribanks.
* Re-added support for the old format of /proc/xpp/sync write:
(echo N 0 > /proc/xpp/sync ) . The new format (SYNC=NN) is preffered.
* Firmware update to fix a PCM issue.
* Fixed a build issue with kernel 2.6.8 .
* Fixed missing initialization in Zaptel::Xpp::Xbus .
* genzaptelconf will now set FXS ports as LS by default. To set them as
KS, use fxs_default_start=ks in /etc/default/zaptel / /etc/sysconfig/zaptel
(Also a workaround for #7755 ).
* Groundwork for sync from zaptel master span: if zaptel is built with
ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will report its
drift from the zaptel sync master.
* USB firmware update: had bad lines checksums (and fxload did not report).
* fpga_load can now better report bad hex file checksum ;-) .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2239 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
utilities that use them. disabled by default for now.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2223 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2222 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Reverse polarity and power denial detection.
* A short led flash at registration time.
* Add a real version of the xpp modules to them (independent of the Zaptel
version).
* Update our line status even when not registered.
* Fixed a false SIG_CHANGED when inserting or removing cable to FXO.
* Fixed compilation fixes for 2.6.20 (Bug #8982)
* A cleaner fix for the bool changes of 2.6.19 .
* Automatically detect echo_can_state_t at debug time.
* Automaitcally set XPP_DEBUGFS (depending on debugfs) at compile time.
* Bug-fixes to zaptel-helper.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2113 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* callerid not written to zapata.conf
* some messages were not printed with say (and thus not supressed without -v)
(Xorcom changeset 3240)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2063 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
XPS Init scripts renamed accordingly.
* Performance improvements for multi-XPD (span) devices.
* Astribank BRI driver (in next commit).
* Changes under /proc:
- XBUS and XPD numbers have two digits.
- Every script wildcard should be replaced from XBUS-? to XBUS-[0-9]*
- Added /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop.
* Several countries (South Africa, UAE, anybody else) require a shorter
ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011.
* Use tasklets to move most of the interrupt PCM copying out of the interrupt.
* Debugfs-based code to dump data to userspace (used to debug BRI D channel).
* Pretend every 2.6.9 actually has later RHEL's typedefs.
* fpga_load supports /dev/bus/usb .
* Fixed physical order sorting in genzaptelconf.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1966 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r2847@boole: diego | 2006-12-03 10:33:00 +0200
added documentation which explains which packages are needed to build
the drivers on different distributions.
r2862@boole: tzafrir | 2006-12-05 08:43:50 +0200
README.Astribank: A typo in the sample config (changeset:2861).
r2891@boole: tzafrir | 2006-12-08 01:11:45 +0200
Re-accept changeset:2832 after all.
r2892@boole: tzafrir | 2006-12-08 02:46:07 +0200
Merge genzaptelconf changeset:2866 from trunk:
* Zapata comment on unidentified channel goes to $zapata_file
* Correct pattern for Sangoma A200 card's channels.
r2893@boole: tzafrir | 2006-12-08 03:11:37 +0200
genzaptelconf:
* Add options xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel.
* Do print the original line for every channel.
r2909@boole: tzafrir | 2006-12-10 20:03:59 +0200
Add some sleeps in older kernels in the firmware loading script.
r2932@boole: tzafrir | 2006-12-14 17:30:12 +0200
Make the warning about a call to off-hook FXO debug. At least if we
cannot suppress it at module load time.
r2933@boole: tzafrir | 2006-12-14 17:32:00 +0200
Don't redefine 'bool' on newer kerenls to fix building with kernel
2.6.19. Taken from Digium tree.
(from changeset:2930)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1718 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
genzaptelconf: A list of countries for which to use busydetect.
(backport of changeset:2829)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1667 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Maintenance branch for asterisk-1.2.x
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1666 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1653 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Typo: SBINDIR -> BINDIR .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1652 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Fixed a typo in the "wctdm reimplementation".
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1650 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merging xpp driver release 1.2 (rev. 2569), originally team/tzafrir/xpp_1.2
* Should build well. Almost final.
* genzaptelconf: Also work when zap_autoreg=0
* README.Astribank updated for rev. 1.2.
* xpp/utils/Makefile: Use $< with cc -c
* Get xpp/utils configuration from autoconf (without changesin top dir)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1648 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
instead of setting HOSTCC and CC directly in the Makefile, use the information
provided by the configure script (issue #8055, tzafrir)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1647 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
defaults.
* genzaptelconf: Don't check for zap_autoreg in wait_for_xpp .
* genzaptelconf: Add support for fxs_immediate: option to set FXS port as
immediate.
* genzaptelconf: Fix few left over writes to stdout for config files.
* genzaptelconf: Documentation fixes.
* genzaptelconf.8: bring up-to-date.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1559 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* E1 spans should not be configured as "national". TODO: find a better default
* Add support for Sangoma A102 (Hopefully also all A10x) PRI cards:
-d won't work, but will configure existing spans.
* Better comments in genconf()
* Removing update_extensions_defs: cleaning temporary files is only done once.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1495 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Hopefully correct PRI setting for country=cl
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1494 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
using the variable ASTERISK_INIT_SCRIPT (from the config file or from
the environment).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1493 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1457 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1229 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1228 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1227 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* FPGA firmware now loaded from PC (for newer models)
* Driver for the FXO module (xpd_fxo.ko)
* Moved most userspace files to the subdirectory utils (see also next commit)
* Explicit license for firmware files
* Optionally avoid auto-registration
* Registers initializations code is done by a userspace script.
* Remove obsolete .inc initialization files (we use user-space init)
* Added an install target to the utils dir.
* Updated README.Astribank accordingly.
* Using RBS signalling, as caller ID did not work well otherwise.
* Better handling of USB protocol errors.
* Fixed some procfs-related races.
* per-card-module ioctls.
* fxotune support.
* opermode support (set through /etc/default/zaptel for now)
* Userspace initialization script can also read registers.
* Power calibration works (and implemented in perl)
* some fine-tuning to the regster initialization parameters.
* Leds turn on before registration and turn off after it.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1212 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|