Age | Commit message (Collapse) | Author |
|
* Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward)
* Fix a critical race with zaptel synchronization (r4362)
* Added a /proc/xpp/cmds for statistics about command timing (r4360)
* Fix a digit mapping bug with hardware dtmf detection (r4357)
* In xpp/utils/Makefile add perl syntax checks to our scripts (r4337)
* Better USB data error checking (r4336)
* udev rules (xpp.rules) avoid false calls from wrong nodes (r4331)
* Improve hardware detection and reporting in lszaptel,
zaptel_hardware. zapconf is basically functional.
* Leds are blinked synchronously on all Astribanks now (r4262)
* Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258)
(This feature was not yet accepted into official zaptel)
* Removed compile warning about HZ != 1000 (r4218)
* Firmware updates.
* fpga_load now supports USB pathes without zeros (r4211)
* XPD numbers have changed to '<Unit><Subunit>' (r4196)
* Proper support for ZT_VMWI ioctl, if used in zaptel (r4092)
* Fix FXO power denial detection (r4054)
* FXO could accidentally go off-hook with some compilers (r4048)
(From branches/1.2 r2732, r2735 - branches/1.4 2736)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2813 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
r2123 | tzafrir | 2007-02-08 02:05:17 +0200 (Thu, 08 Feb 2007) | 27 lines
Branch 1.4 is back in sync (currently: xorcom rev. 3332):
* Performance improvements for multi-XPD (span) devices.
* Astribank BRI driver (in next commit).
* Changes under /proc:
- XBUS and XPD numbers have two digits.
- Every script wildcard should be replaced from XBUS-? to XBUS-[0-9]*
- Added /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop.
* Several countries (South Africa, UAE, anybody else) require a shorter
ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011.
* Use tasklets to move most of the interrupt PCM copying out of the interrupt.
* Debugfs-based code to dump data to userspace (used to debug BRI D channel).
* Pretend every 2.6.9 actually has later RHEL's typedefs.
* fpga_load supports /dev/bus/usb .
* Fixed physical order sorting in genzaptelconf.
* Reverse polarity and power denial detection.
* A short led flash at registration time.
* Add a real version of the xpp modules to them (independent of the Zaptel
version).
* Update our line status even when not registered.
* Fixed a false SIG_CHANGED when inserting or removing cable to FXO.
* Fixed compilation fixes for 2.6.20 (Bug #8982)
* A cleaner fix for the bool changes of 2.6.19 .
* Automatically detect echo_can_state_t at debug time.
* Automaitcally set XPP_DEBUGFS (depending on debugfs) at compile time.
* Bug-fixes to zaptel-helper. Moved to xpp/utils .
* Xbus protocol version: 2.4 (Zaptel 1.2.12/1.4.0 had 2.3).
XPS Init scripts renamed accordingly.
........
r2124 | tzafrir | 2007-02-08 02:30:56 +0200 (Thu, 08 Feb 2007) | 1 line
Now 'chans' is used after all.
........
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2144 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1724@boole: tzafrir | 2006-12-18 15:55:59 +0200
Code is 2.6-specific anyway, no need for an explicit test.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1733 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
................
r1701 | kpfleming | 2006-12-11 13:07:58 -0600 (Mon, 11 Dec 2006) | 10 lines
Merged revisions 1700 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r1700 | kpfleming | 2006-12-11 13:05:43 -0600 (Mon, 11 Dec 2006) | 2 lines
kernel 2.6.19 now has a type called 'bool', although it's not completely implemented so there will still be some warnings when building xpp against 2.6.19 kernel headers
........
................
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1702 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merging xpp driver release 1.2 (rev. 2569), originally team/tzafrir/xpp_1.2
* Should build well. Almost final.
* genzaptelconf: Also work when zap_autoreg=0
* README.Astribank updated for rev. 1.2.
* xpp/utils/Makefile: Use $< with cc -c
* Get xpp/utils configuration from autoconf (without changesin top dir)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1563 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1423 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* xpd_fxo.ko (FXO span) is now operational
* Remove obsolete .inc initialization files (we use user-space init)
* Added an install target to the utils dir.
* Updated README.Astribank accordingly.
* Using RBS signalling, as caller ID did not work well otherwise.
* Better handling of USB protocol errors.
* Fixed some procfs-related races.
* per-card-module ioctls.
* fxotune support.
* opermode support (set through /etc/default/zaptel for now)
* Userspace initialization script can also read registers.
* Power calibration works (and implemented in perl)
* some fine-tuning to the regster initialization parameters.
* Leds turn on before registration and turn off after it.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1204 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* FPGA firmware now loaded from PC (for newer models)
* Driver for the FXO module
* Moved most userspace files to the subdirectory utils (see also next commit)
* Explicit license for firmware files
* Optionally avoid auto-registration
* Initializations parameters to chips given from userspace
* And did I mention bugfixes?
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1021 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r949 | kpfleming | 2006-02-14 20:24:18 -0600 (Tue, 14 Feb 2006) | 2 lines
initial import of Xorcom Astribank driver (issue #6452, with minor mods)
........
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@950 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|