Age | Commit message (Collapse) | Author |
|
* BRI improvement: an 'nt_keepalive' parameter to xpd_bri forces
a BRI_NT to retry a connection indefinitely (this is our default).
When false it revert to the behaviour in changeset:4415 ("Bezeq like")
* Improvement in DBG macros. The print_dbg parameter is now set of
flags to debug. They are defined in zap_debug.h
* Don't use Astribanks connected to USB1 interfaces
Unless the user set the option usb1=1 for xpp_usb (r4504).
* And some more documentation...
* Include some of our variables in the default zaptel sample file.
Merged revisions 2860 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
Merged revisions 2866 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2867 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Show Astribank 6+2 as 6/2 channels and not 8/8 channels.
- Added as a "subtype" to the device type (r4391).
* Fixed a panic in BRI span shutdown method (r4393).
* Changes to debug macros.
* Add proper sysfs support (r4406)
- A bus on whuch all of the Astribanks reside.
- Replaces useless sysfs code that existed in the module.
- Currently used to set the sync source automatically at device
adition / removal.
* BRI: We do need the T1 timer in NT. If it gets into G2 state (r4407).
Merged revisions 2812 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
* Ignore generated files on the new wctdm24xxp dir. (from 1.2 r2796)
* Ignore two extra man pages on xpp/utils .
Merged revisions 2797 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
* Generate list of Zaptel Modules directories automatically.
* Evaluate PERLLIBDIR only once.
Closes: #10223 (Xorcom changeset:4379, from 1.2 r2758)
Merged revisions 2759 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2814 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward)
* Fix a critical race with zaptel synchronization (r4362)
* Added a /proc/xpp/cmds for statistics about command timing (r4360)
* Fix a digit mapping bug with hardware dtmf detection (r4357)
* In xpp/utils/Makefile add perl syntax checks to our scripts (r4337)
* Better USB data error checking (r4336)
* udev rules (xpp.rules) avoid false calls from wrong nodes (r4331)
* Improve hardware detection and reporting in lszaptel,
zaptel_hardware. zapconf is basically functional.
* Leds are blinked synchronously on all Astribanks now (r4262)
* Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258)
(This feature was not yet accepted into official zaptel)
* Removed compile warning about HZ != 1000 (r4218)
* Firmware updates.
* fpga_load now supports USB pathes without zeros (r4211)
* XPD numbers have changed to '<Unit><Subunit>' (r4196)
* Proper support for ZT_VMWI ioctl, if used in zaptel (r4092)
* Fix FXO power denial detection (r4054)
* FXO could accidentally go off-hook with some compilers (r4048)
(From branches/1.2 r2732, r2735 - branches/1.4 2736)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2813 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Tested with zaptel-1.2.17.1
* Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info
* Adjust output of xpp_sync script. Pad for 8 port BRI.
* Added a debugging module parport_debug (not compiled by default).
* Added an optional patch to zaptel:
- compiles only if ZAPTEL_SYNC_TICK is defined
- Allow interested driver to register for "sync" notification.
- Does not affect drivers that do not use this feature.
* Added external synchronization feature:
- Only if ZAPTEL_SYNC_TICK feature is compiled in
- Than XPP may be synchronized by another card (e.g: an Astribank
with FXS can be synchronized by a Digium PRI card).
- May be enabled/disabled in runtime via the 'sync_tick_active' module
parameter to the xpp.ko module.
* Fixed a potential bug in D-Channel hexdump printing.
* New visual indications in BRI leds:
- Constant ON RED/GREEN: Shows the port type -- NT/TE.
- Very fast "double blink": Layer1 work, no D-Channel yet.
- Steady blinking (1/2 sec): D-Channel trafic detected.
* xpp_fxloader moved to /usr/share/zaptel .
* adj_clock removed: never really used.
* Now we have Zaptel::Hardware and a sample zaptel_hardware script (not
(installed by default).
* We also have a sample perl zapconf (not installed by default) which
aims at replacing genzaptelconf (sans the modules detection).
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2537 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Protocol no. 2.6: syncing improvements.
* Support for 8-port Astribank BRI.
* Firmware unloading now works:
rmmod xpp_usb; /etc/hotplug/usb/xpp_fxloader reset
* Defaults of kernel parameters are now part of parameter description.
* World-readable kernel parameters.
* No need for extra patch beyond bristuff for Astribank BRI.
* Default poll intervals changed: 500 in BRI and FXO.
* Allow changing FXS polls interval at run time.
* BRI initalization fixed on SUSE (path to logger).
* When using the SUSE zaptel rpm package, set modules_var=ZAPTEL_MODULES in
/etc/sysconfig/zaptel .
* zt_registration not verbose by default.
* xpp_sync warns if FXO is sync slave.
* Fixed genzaptelconf -z (zapscan output emulation).
* PCM fixes.
* Solves "multiple ticks" bug. No need for pcm_tasklets workaround.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2478 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r2286 | tzafrir | 2007-03-05 18:14:11 +0200 (Mon, 05 Mar 2007) | 2 lines
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2289 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
------------------------------------------------------------------------
r2243 | tzafrir | 2007-02-28 02:05:59 +0200 (Wed, 28 Feb 2007) | 4 lines
* xpp rev. 3495: fix a race in the FXO driver of recent weeks.
* Add the Astribank BRI driver (though still needs bristuffed zaptel
to build and thus will not build by default)
------------------------------------------------------------------------
r2239 | tzafrir | 2007-02-27 08:14:18 +0200 (Tue, 27 Feb 2007) | 18 lines
Xorcom rev. 3491:
* Version of xpp modules is set from xpp/.version, rather than "unknown".
* Astribank devices are now initialized in parallel: faster startup
when there are multiple Astribanks.
* Re-added support for the old format of /proc/xpp/sync write:
(echo N 0 > /proc/xpp/sync ) . The new format (SYNC=NN) is preffered.
* Firmware update to fix a PCM issue.
* Fixed a build issue with kernel 2.6.8 .
* Fixed missing initialization in Zaptel::Xpp::Xbus .
* genzaptelconf will now set FXS ports as LS by default. To set them as
KS, use fxs_default_start=ks in /etc/default/zaptel / /etc/sysconfig/zaptel
(Also a workaround for #7755 ).
* Groundwork for sync from zaptel master span: if zaptel is built with
ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will report its
drift from the zaptel sync master.
* USB firmware update: had bad lines checksums (and fxload did not report).
* fpga_load can now better report bad hex file checksum ;-) .
------------------------------------------------------------------------
r2223 | tzafrir | 2007-02-24 03:05:05 +0200 (Sat, 24 Feb 2007) | 3 lines
Add the Zaptel and Zaptel::Xpp perl modules, and some simple
utilities that use them. disabled by default for now.
------------------------------------------------------------------------
r2222 | tzafrir | 2007-02-24 02:55:05 +0200 (Sat, 24 Feb 2007) | 2 lines
Make the xpp/utils/Makefile in 1.2 closer to the one in 1.4 .
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2247 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
r2123 | tzafrir | 2007-02-08 02:05:17 +0200 (Thu, 08 Feb 2007) | 27 lines
Branch 1.4 is back in sync (currently: xorcom rev. 3332):
* Performance improvements for multi-XPD (span) devices.
* Astribank BRI driver (in next commit).
* Changes under /proc:
- XBUS and XPD numbers have two digits.
- Every script wildcard should be replaced from XBUS-? to XBUS-[0-9]*
- Added /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop.
* Several countries (South Africa, UAE, anybody else) require a shorter
ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011.
* Use tasklets to move most of the interrupt PCM copying out of the interrupt.
* Debugfs-based code to dump data to userspace (used to debug BRI D channel).
* Pretend every 2.6.9 actually has later RHEL's typedefs.
* fpga_load supports /dev/bus/usb .
* Fixed physical order sorting in genzaptelconf.
* Reverse polarity and power denial detection.
* A short led flash at registration time.
* Add a real version of the xpp modules to them (independent of the Zaptel
version).
* Update our line status even when not registered.
* Fixed a false SIG_CHANGED when inserting or removing cable to FXO.
* Fixed compilation fixes for 2.6.20 (Bug #8982)
* A cleaner fix for the bool changes of 2.6.19 .
* Automatically detect echo_can_state_t at debug time.
* Automaitcally set XPP_DEBUGFS (depending on debugfs) at compile time.
* Bug-fixes to zaptel-helper. Moved to xpp/utils .
* Xbus protocol version: 2.4 (Zaptel 1.2.12/1.4.0 had 2.3).
XPS Init scripts renamed accordingly.
........
r2124 | tzafrir | 2007-02-08 02:30:56 +0200 (Thu, 08 Feb 2007) | 1 line
Now 'chans' is used after all.
........
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2144 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1721@boole: tzafrir | 2006-12-18 15:46:42 +0200
Assume every 2.6.9 kernel is a later RHEL4 kernel, which backported
the gfp_t typedef. Either way we break some systems).
r2938: diego | 2006-12-17 14:22:16 +0200
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1730 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1668@boole: tzafrir | 2006-11-30 23:48:25 +0200
r2832@boole: tzafrir | 2006-11-29 11:06:06 +0200
Add parameter xpp_ec to the module xpp (xpp_zap.c). Defaults to 1.
If 0, module will use Zaptel echo canceller even with XPP_EC_CHUNK.
Parameter is read-only for now: cannot be set through /sys/modules.
(Merge of changeset:2830)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1682 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merging xpp driver release 1.2 (rev. 2569), originally team/tzafrir/xpp_1.2
* Should build well. Almost final.
* genzaptelconf: Also work when zap_autoreg=0
* README.Astribank updated for rev. 1.2.
* xpp/utils/Makefile: Use $< with cc -c
* Get xpp/utils configuration from autoconf (without changesin top dir)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1563 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1423 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1417 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Replace the completion variable with two atomic counters and a wait queue
the xbus_poll() code is revamped to use this.
* genzaptelconf: Adapt to different module parameter location in sysfs .
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1416 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* remove all non WITH_RBS code. No need for the define.
* unused recv_errors and seq_errors.
* CID_START_TICKS, CID_STOP_TICKS cid_timer from trunk/
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1411 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
zaptel set it before registration is finished.
(right: xpp needs to replicate zaptel's bookkeeping here).
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1397 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(most of this fix got accidentally into in xbus-core.c in prev. commit)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1395 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1391 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* xpd_fxo.ko (FXO span) is now operational
* Remove obsolete .inc initialization files (we use user-space init)
* Added an install target to the utils dir.
* Updated README.Astribank accordingly.
* Using RBS signalling, as caller ID did not work well otherwise.
* Better handling of USB protocol errors.
* Fixed some procfs-related races.
* per-card-module ioctls.
* fxotune support.
* opermode support (set through /etc/default/zaptel for now)
* Userspace initialization script can also read registers.
* Power calibration works (and implemented in perl)
* some fine-tuning to the regster initialization parameters.
* Leds turn on before registration and turn off after it.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1204 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* FPGA firmware now loaded from PC (for newer models)
* Driver for the FXO module
* Moved most userspace files to the subdirectory utils (see also next commit)
* Explicit license for firmware files
* Optionally avoid auto-registration
* Initializations parameters to chips given from userspace
* And did I mention bugfixes?
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1021 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@972 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r949 | kpfleming | 2006-02-14 20:24:18 -0600 (Tue, 14 Feb 2006) | 2 lines
initial import of Xorcom Astribank driver (issue #6452, with minor mods)
........
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@950 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|