| Age | Commit message (Collapse) | Author |
|---|
|
* Version of xpp modules is set from xpp/.version, rather than "unknown".
* Astribank devices are now initialized in parallel: faster startup
when there are multiple Astribanks.
* Re-added support for the old format of /proc/xpp/sync write:
(echo N 0 > /proc/xpp/sync ) . The new format (SYNC=NN) is preffered.
* Firmware update to fix a PCM issue.
* Fixed a build issue with kernel 2.6.8 .
* Fixed missing initialization in Zaptel::Xpp::Xbus .
* genzaptelconf will now set FXS ports as LS by default. To set them as
KS, use fxs_default_start=ks in /etc/default/zaptel / /etc/sysconfig/zaptel
(Also a workaround for #7755 ).
* Groundwork for sync from zaptel master span: if zaptel is built with
ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will report its
drift from the zaptel sync master.
* USB firmware update: had bad lines checksums (and fxload did not report).
* fpga_load can now better report bad hex file checksum ;-) .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2239 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
XPS Init scripts renamed accordingly.
* Performance improvements for multi-XPD (span) devices.
* Astribank BRI driver (in next commit).
* Changes under /proc:
- XBUS and XPD numbers have two digits.
- Every script wildcard should be replaced from XBUS-? to XBUS-[0-9]*
- Added /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop.
* Several countries (South Africa, UAE, anybody else) require a shorter
ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011.
* Use tasklets to move most of the interrupt PCM copying out of the interrupt.
* Debugfs-based code to dump data to userspace (used to debug BRI D channel).
* Pretend every 2.6.9 actually has later RHEL's typedefs.
* fpga_load supports /dev/bus/usb .
* Fixed physical order sorting in genzaptelconf.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1966 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
- Remove old SOFT_SIMULATOR (not used in the last year ;-)
- As a result can merge packet_receive() and packet_process()
- Remove unused macro (MAX_XPACKET_DATALEN) from xproto.h
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1962 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merging xpp driver release 1.2 (rev. 2569), originally team/tzafrir/xpp_1.2
* Should build well. Almost final.
* genzaptelconf: Also work when zap_autoreg=0
* README.Astribank updated for rev. 1.2.
* xpp/utils/Makefile: Use $< with cc -c
* Get xpp/utils configuration from autoconf (without changesin top dir)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1648 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1457 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* FPGA firmware now loaded from PC (for newer models)
* Driver for the FXO module (xpd_fxo.ko)
* Moved most userspace files to the subdirectory utils (see also next commit)
* Explicit license for firmware files
* Optionally avoid auto-registration
* Registers initializations code is done by a userspace script.
* Remove obsolete .inc initialization files (we use user-space init)
* Added an install target to the utils dir.
* Updated README.Astribank accordingly.
* Using RBS signalling, as caller ID did not work well otherwise.
* Better handling of USB protocol errors.
* Fixed some procfs-related races.
* per-card-module ioctls.
* fxotune support.
* opermode support (set through /etc/default/zaptel for now)
* Userspace initialization script can also read registers.
* Power calibration works (and implemented in perl)
* some fine-tuning to the regster initialization parameters.
* Leds turn on before registration and turn off after it.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@1212 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@949 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
