summaryrefslogtreecommitdiff
path: root/xpp
AgeCommit message (Collapse)Author
2008-05-14XPP documentation fixes.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4271 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-05-13xpp r5723: Includes, among others:tzafrir
* New firmware protocol version: 3.0 . * New numbers for the device types: (e.g. in card_init* scripts) - FXS: 1 (was: 3) - FXO: 2 (was: 4) - BRI: 3 (was: 6 for TE, 7 for NT) - PRI: 4 (was: 9) * Init scripts of FXS and FXO modules are now written in Perl as well (be sure to have File::Basename, e.g: perl-modules in Debian). * calibrate_slics merged into init_card_1_30 . * Module parameter print_dbg replaced with debug . Same meaning. * init_fxo_modes removed: content moved into init_card_2_30, verified at build time. * Code tested with sparse. Most warnings were fixed. * Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get ignored by ztscan. * Handle null config_desc we get from some crazy USB controllers. * genzaptelconf: Fix reporting of empty slots in list mode. * xpp_blink can now blink a single analog port. * "slics" has been renamed "chipregs". * Fixed a small typo in fpga_load(8). * Fixed bashism in xpp_fxloader. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4264 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-05-04* Allow initialization of T1-s (r5665) .tzafrir
* Remove some false alarms on T1-s (r5669) . git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4234 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-05-04A test for a specific #define in zconfig.h was done by invoking cpp .tzafrir
Sadly the change of CFLAGS handling in kernel 2.6.24 meant that it is no longer as easy to invoke cpp on our own. Impact: On kernel >= 2.6.24, xpd_bri never got built, even if the bri_dchan patch was applied. Fix: use a simpler grep instead. Hopefully noone passes it through other means. This should fix issue #12426 . (Backport of r4193 from branches/1.4) git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4233 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-04-10Officially bumping xpp version (xpp/.version) to 5566 .tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4164 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-04-09The rest of the backport.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4158 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-04-09Backport some fxo_modes changes from 1.4 to make xpp/utils build again.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4157 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-04-04Zaptel::Hardware - Add support for AEX410.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4138 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-04-03Moving a macro to quiet a compiler warning.sruffell
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4127 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-03-31Document when "D-Chan RX Bad checksum" is not a problem.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4109 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-03-21* Earleier initialization of PRI module's register.tzafrir
* Fix zaptel-perl reporting of battery after procfs changes. * Documentation updates. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4036 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-03-18* We need to silence the echo-canceller buffers as well.tzafrir
* But no need to cancel echo on channels without PCM. * Switch to FXS hardware DTMF detection again. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@4012 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-03-06xpp.r5512:tzafrir
* Build: - Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/* - We conditionally use old/new directory scheme: In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well). - Fix compile warnings on 64 bit systems. - Compile fixes for kernel-2.6.24 * UDEV: - /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook. - astribank_hook: Modify to do nothing. Add some documentation. * Autoconfiguration -- zapconf: - Don't fail zapconf et.al. if no config file was found. - Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?). - Add some newer Digium cards to our hardware inventory. - Partially handle cases where the /proc/zaptel strings does not contain info about E1/T1/J1 or NT/TE. * Better SYNC: - Finer tuning of PLL (New firmware). - Change calculation algorithm of sync offset. It now copes better with the variance in USB frame reception timing. - Statistics: . The view of results was moved from /proc/xpp/XBUS-*/summary to a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced. . A new xpp_timing script shows all astribanks. . A new write only /sys/bus/astribanks/devices/xbus-*/cls is used to clear statistics. Eventually, clearing of XBUS related statistics should be done here. One that was migrated is the clearing of 'PCM [TR]X:' numbers currently appearing in /proc/xpp/XBUS-*/summary (they should be moved too later). - Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB") adapted their use in printk and /proc so the text is clear. - Added a command line parameter xpp.disable_pll_sync to stop all adjustments command to AB (calculations still continue as usual). * PRI: - 4 port support - set clocking master span via ztcfg, like other zaptel devices. * FXO: - Fix false hangups in some countries (voltage fluctuations). - Some countries send caller-id before first ring. Added code to handle caller-id PCM pass through according to a new command line parameter (xpd_fxo.caller_id_style). - No longer sends an event on zt_open. See #12160 . * Misc: - Adapt to zaptel-1.4.8 and above ztscan: added fields returend by new ZT_SPANSTAT_V2 ioctl() - Document sysfs and waitfor_xpds. - Miscelaneous optimizations and bugfixes. - Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has replaced it a long time ago. - Add RX_CMD counter to /proc/xpp/XBUS-*/summary - Unclutter some of the usb disconnect messages. - xpp_usb: minor preformance improvements in receive. Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3952 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-01-30Don't fail zapconf if no config file was found.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3766 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-01-10Complete the renaming of Makefile (to reduce merge issues with local xpptzafrir
copy). git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3644 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-01-10xpp.r5254:tzafrir
* Improved polarity reversal hangups in FXO (r5194). Fixed false detection of polarity reversals. * Optimize xframe allocation, by not zeroing the whole memory (in get_xframe()). * Fixed erronous error message that appeared sometimes from fpga_load during USB renumeration. * Zaptel::Chans now provides battery() reporting for some FXO channels (Astribank FXO and wcfxo). git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3643 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-12-27Update documentation. Mainly regarding the PRI module.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3564 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-12-24* XppUtils.pm renamed Zaptel::Utils.pm .tzafrir
* Some more documentation. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3555 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-12-19* A few more fixes to card_pri.tzafrir
* Do use "crc4" for E1 by default when generating zaptel.conf . git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3540 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-12-18xpp r5151:tzafrir
* xpd_pri: Basically ready. * PCM synchronization changes: - Each Astribank unit ticks independently. Each with its own PLL. - HOST synchronization is gone. Loading of xpp will no longer cause useless 250 ticks per second if you have no Astribank. - Synchronization from the zaptel sync master requires setting ZAPTEL as sync source (xpp_sync ZAPTEL). * rx_tasklet is now a parameter of the module xpp, rather than of xpp_usb. * New FPGA firmware: 5128 (1151) / 5122 (1141, 1131): - Fixes synchronization issues. - PRI module: E1 should now work. * perl module and utilities: - Modules no longer magically scan system on initialization. - Scanning is by calling explicit methods. - "Serial" has been renamed "Label". It is basically unique, but should be modifieble. - Some basic documentation of zaptel perl modules. * Default sort order of zt_registration is back to SORT_CONNCTOR. * zt_registration proc file now shows the number of span registered to if registered. Try: grep . /proc/xpp/XBUS-*/XPD-*/zt_registration * genzaptelconf: Allow using a custom command instead of /etc/init.d/asterisk to start/stop asterisk. * Fixed the typo "Slagish". git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3506 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-12-11Fix the typo for the case of using M= instead of SUBDIRS= .tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3415 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-11-14Changelog for xpp r5010.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3232 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-11-14Increase FXS ring detect debounce interval.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3231 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-11-14Improve (reduce) signal attenuation on FXO ports.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3230 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-11-14Fix a deadlock spotted on some SMP installations.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3229 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-11-07* zaptel-perl, genzaptelconf: Detect and list Rhino cards.tzafrir
* zaptel-perl: Fix reporting of empty slots in analog Digium cards. * genzaptelconf: More readable case-s. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3217 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-10-18Fix zaptel_hardware's behaviour for unknown span types.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3157 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-10-18 * zaptel-perl should not panic when there is no /proc/bus/usb (Closestzafrir
#11020). * Don't build metering by default for now. * And this is xpp rev 4900. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3153 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-10-18Make opermode work again.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3152 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-10-16xpp r4892:tzafrir
* Zaptel/Hardware perl modules: - Use sysfs directly. Don't rely on lspci/lsusb. - Each device has a description and driver name. - Zaptel::Hardware::drivers() to show the list of required drivers for this system (see zaptel_drivers). - zaptel_hardware shows a description and a (suggested?) driver. * zt_registration sorts by Serial first and only then by connector. * USB_FW.hex replaces all the USB_11x0.hex . - Separate USB interface for the management processor. - Hence fpga_load can now work even with drivers loaded. * Fix firmware upgrading. * Fix manual firmware loading while auto-loading. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3142 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-10-03New xpp release: r4786:tzafrir
* New firmware protocol version: 2.9 . * fpga_load: initial clean-ups before interface split. * genzaptelconf: Don't leave an empty directory behind (4784) * Increase xpp poll_timeout to 1000ms - useful for CentOS 4 (r4781). * Fix initialization anoyance: if AB don't answer to polls, don't waitfor_xpds, and show no waiting XPDs (r4725). * Disable dtmf_detect by default once again (r4712). * Don't check twice for asterisk to stop. The second test was done while Asterisk was still stopping (r4708). * Support building the kernel with M= instead of with SUBDIRS= , as used in some newer build systems (r4677). git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3105 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-09-22Re-disable dtmf_detection of the FXS module (From xpp rev 4712).tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3084 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-09-18Support building the kernel with M= instead of with SUBDIRS= , as used tzafrir
in some newer build systems. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3055 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-09-14New xpp release (Xorcom rev 4648):tzafrir
* New firmware protocol version: 2.8 . * New firmwares fix input ports offhook. * Cleanup INFO() messages during module loading. * USB: Receive queue with TASKLETS [r4600]. Controlled by rx_tasklet parameter to xpp_usb module (can be changed in runtime). * The pcm_tasklet parameter in xpp module is deprecated: - Does not actually do anything. - If set during module loading, shows an ERR() message. - Also appears in /proc/xpp/sync * FXS: Hardware DTMF detection by default, can be disabled by setting dtmf_detection=0 parameter to xpd_fxs. PCM is muted when DTMF key is pressed. * zapconf: - Can now generate users.conf compatible with asterisk-gui. - Optional command-line arguments denoting which files to generate. Possible values are 'zaptel', 'zapata' and 'users'. - Defaults to creating zaptel and zapata. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3019 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-09-09* Remove a warning (no point bothering everybody about it).tzafrir
* ignore perlcheck. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3005 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-09-09xpp.r4584:tzafrir
* New firmware to fix FXS leds irregularities. * Less noise at build time - don't echo version, test compile only once. * zapconf can generate users.conf snippets. * xpd_pri: initial version. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@3004 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-08-21Fix building on kernel 2.6.23rc1, from Axel Thimm (xpp r4523).tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2919 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-08-19Fix README.Astribank with asciidoc 8.2.2: make "underlining" moretzafrir
strict. (xpp r4519) git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2906 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-08-16xpp rev. 4515:tzafrir
* BRI improvement: an 'nt_keepalive' parameter to xpd_bri forces a BRI_NT to retry a connection indefinitely (this is our default). When false it revert to the behaviour in changeset:4415 ("Bezeq like") * Improvement in DBG macros. The print_dbg parameter is now set of flags to debug. They are defined in zap_debug.h * Don't use Astribanks connected to USB1 interfaces Unless the user set the option usb1=1 for xpp_usb (r4504). * And some more documentation... * Include some of our variables in the default zaptel sample file. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2860 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-08-14Merging a few small changes Xorcom:tzafrir
* Marked with no. 4416, to note that major changes after 4415 were note merged yet. * Demote the messages about PCM in non-PCM from notice to debug (r4501). * Fix sample BRI zapata.conf: NT instead of TE (r4498). * Disable FXS hardware DTMF detection by default (r4492). git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2832 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-08-05Extra Zaptel PCI IDs (from Philipp Kempgen). From Xorcom r4466.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2818 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-08-01xpp.r4415:tzafrir
* Show Astribank 6+2 as 6/2 channels and not 8/8 channels. - Added as a "subtype" to the device type (r4391). * Fixed a panic in BRI span shutdown method (r4393). * Changes to debug macros. * Add proper sysfs support (r4406) - A bus on whuch all of the Astribanks reside. - Replaces useless sysfs code that existed in the module. - Currently used to set the sync source automatically at device adition / removal. * BRI: We do need the T1 timer in NT. If it gets into G2 state (rr4407). git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2811 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-07-20New product support, new echo canceler and new boardsmattf
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2761 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-07-19* Generate list of Zaptel Modules directories automatically.tzafrir
* Evaluate PERLLIBDIR only once. Closes: #10223 (Xorcom changeset:4379) git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2758 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-07-13* Update documentation on perl utilities.tzafrir
* But we do need to ignore their man pages. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2735 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-07-12xpp driver r4371:tzafrir
* Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward) * Fix a critical race with zaptel synchronization (r4362) * Added a /proc/xpp/cmds for statistics about command timing (r4360) * Fix a digit mapping bug with hardware dtmf detection (r4357) * In xpp/utils/Makefile add perl syntax checks to our scripts (r4337) * Better USB data error checking (r4336) * udev rules (xpp.rules) avoid false calls from wrong nodes (r4331) * Improve hardware detection and reporting in lszaptel, zaptel_hardware. zapconf is basically functional. * Leds are blinked synchronously on all Astribanks now (r4262) * Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258) (This feature was not yet accepted into official zaptel) * Removed compile warning about HZ != 1000 (r4218) * Firmware updates. * fpga_load now supports USB pathes without zeros (r4211) * XPD numbers have changed to '<Unit><Subunit>' (r4196) * Proper support for ZT_VMWI ioctl, if used in zaptel (r4092) * Fix FXO power denial detection (r4054) * FXO could accidentally go off-hook with some compilers (r4048) git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2732 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-07-11* Enable zaptel-perl by default.tzafrir
* Clunky shell xpp init functions replaced with better perl utilities. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2710 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-06-07Some XPP bugfixes:tzafrir
* Fix FXO power denial detection (changeset:4054) * Incorrect data type could cause FXO module to go off-hook (changeset:4048) * xpp_fxloader: fix the error message when you want to disable automatic firmware loading... (changeset:4060) git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2589 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-05-17The makefile change needed for parport debugging (only used if parport tzafrir
debugging is enabled). Accedintally left out of previous commit. Has no effect by default. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2534 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2007-05-17* Tested with zaptel-1.2.17.1tzafrir
* Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info * Adjust output of xpp_sync script. Pad for 8 port BRI. * Added a debugging module parport_debug (not compiled by default). * Added an optional patch to zaptel: - compiles only if ZAPTEL_SYNC_TICK is defined - Allow interested driver to register for "sync" notification. - Does not affect drivers that do not use this feature. * Added external synchronization feature: - Only if ZAPTEL_SYNC_TICK feature is compiled in - Than XPP may be synchronized by another card (e.g: an Astribank with FXS can be synchronized by a Digium PRI card). - May be enabled/disabled in runtime via the 'sync_tick_active' module parameter to the xpp.ko module. * Fixed a potential bug in D-Channel hexdump printing. * New visual indications in BRI leds: - Constant ON RED/GREEN: Shows the port type -- NT/TE. - Very fast "double blink": Layer1 work, no D-Channel yet. - Steady blinking (1/2 sec): D-Channel trafic detected. * xpp_fxloader moved to /usr/share/zaptel . * adj_clock removed: never really used. * Debugfs code now disabled by default. * Now we have Zaptel::Hardware and a sample zaptel_hardware script (not (installed by default). * We also have a sample perl zapconf (not installed by default) which aims at replacing genzaptelconf (sans the modules detection). git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2529 5390a7c7-147a-4af0-8ec9-7488f05a26cb
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-30 10:06:24 +0000