From fe2707b2a0c39c3e36f24bdd77c1cca07970abb0 Mon Sep 17 00:00:00 2001 From: mattf Date: Mon, 10 Jul 2006 21:29:54 +0000 Subject: Updates for the b410p documentation git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1214 5390a7c7-147a-4af0-8ec9-7488f05a26cb --- README.b410p | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'README.b410p') diff --git a/README.b410p b/README.b410p index 210173f..7c092fe 100644 --- a/README.b410p +++ b/README.b410p @@ -8,10 +8,17 @@ you will need to run `/etc/init.d/misdn-init config` and then configure the /etc/misdn-init.conf in accordance with your desired -port configuration. To enable hardware echo cancellation, make sure that the -line "dsp_hwechocan=1" is on in your /etc/misdn-init.conf. +port configuration. You will then need to load the modules: -From there on, look to asterisk to configuration. +`/etc/init.d/misdn-init start` + +For the Asterisk portion of the installation, you must use either the -trunk +branch or the crichter branch (for a 1.2 based version of asterisk), which can +be checked out as follows: + +`svn co http://svn.digium.com/svn/asterisk/team/crichter/0.3.0` + +The remainder of the configuration is just setup of /etc/asterisk/misdn.conf. --- Matthew Fredrickson -- cgit v1.2.3