From d8562c778088ff6ab3383df5ceead41eff4bf124 Mon Sep 17 00:00:00 2001
From: tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb>
Date: Thu, 19 Mar 2009 20:08:29 +0000
Subject: xpp: a massive backport from DAHDI. From Xorcom branch-rel-6839-r6908
 .

Sun Mar  1 2009 Oron Peled <oron@actcom.co.il> - xpp.r6795
  * Fix cases where the command_queue overflowed during initialization.
    - Also add a 'command_queue_length' parameter to xpp.ko
  * More migrations to sysfs:
    - Add a 'transport' attribute to our astribank devices which
      points to the usb device we use. E.g:
       /sys/bus/astribanks/devices/xbus-00/transport is symlinked to
       ../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
    - Move /proc/xpp/XBUS-??/XPD-??/span to
      /sys/bus/xpds/devices/??:?:?/span
    - Migrate from /proc/xpp/sync to:
      /sys/bus/astribanks/drivers/xppdrv/sync
    - New 'offhook' attribute in:
      /sys/bus/xpds/devices/??:?:?/offhook
  * PRI: change the "timing" priority to match the convention used by
         other PRI cards -- I.e: lower numbers (not 0) have higher
	 priority.
  * FXO:
    - Power denial: create two module parameters instead of hard-coded
      constants (power_denial_safezone, power_denial_minlen).
      For sites that get non-standard power-denial signals from central
      office on offhook.
    - Don't hangup on power-denial, just notify Dahdi and wait for
    - Fix caller-id detection for the case central office sends it before
      first ring without any indication before.
      Asterisk's desicion.
Mon, Dec  8 2008 Oron Peled <oron@actcom.co.il> - xpp.r6430
  * PRI:
    - Match our span clocking priorities (in system.conf)
      to Digium -- this is a reversal of the previous state.
      Now lower numbers (greater than 0) are better.
    - Synchronization fixes for PRI ports other than 0.
    - Fix T1 CRC for some countries (e.g: China).
  * FXS: fix bug in VMWI detection if using old asterisk
    which does not provide ZT_VMWI ioctl().
  * FXO:
    - Improve caller_id_style module parameter. This provide a workaround
      for countries that send this information without any notification
      (reverse polarity, ring, etc.)
    - Don't force on-hook upon power-denial. So, loopstart devices
      would ignore these as expected.
  * Implement a flow-control to prevent user space (init_card_* scripts)
    from pressuring our command queue.


git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4631 5390a7c7-147a-4af0-8ec9-7488f05a26cb
---
 kernel/xpp/utils/zconf/Zaptel.pm | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'kernel/xpp/utils/zconf/Zaptel.pm')

diff --git a/kernel/xpp/utils/zconf/Zaptel.pm b/kernel/xpp/utils/zconf/Zaptel.pm
index 431689e..1b73d5b 100644
--- a/kernel/xpp/utils/zconf/Zaptel.pm
+++ b/kernel/xpp/utils/zconf/Zaptel.pm
@@ -25,7 +25,7 @@ hardware and loaded Zaptel devices.
   my @spans = Zaptel::spans();
   for my $span (@spans) {
     next if ($span->is_digital);
-    $span->num. " - [". $span->type ."] ". $span->name. "\n";
+     $span->num. " - [". $span->type ."] ". $span->name. "\n";
     for my $chan ($span->chans) {
       print " - ".$chan->num . " - [". $chan->type. "] ". $chan->fqn". \n";
     }
-- 
cgit v1.2.3