From 125e348ee298a3a09fdd1f22f7388ca96e370f3d Mon Sep 17 00:00:00 2001
From: tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb>
Date: Wed, 4 Jul 2007 19:00:51 +0000
Subject: Bourne shell scripts should not use >& . dash doesn't support it. And
 all of them simply supressed errors, so they were replaced with 2> /dev/null
 .

git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2689 5390a7c7-147a-4af0-8ec9-7488f05a26cb
---
 zaptel.init | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'zaptel.init')

diff --git a/zaptel.init b/zaptel.init
index bc9c964..a608d20 100644
--- a/zaptel.init
+++ b/zaptel.init
@@ -174,7 +174,7 @@ hpec_start() {
 	# zaphpec_enable properly installed
 	if [ $system = debian ]; then
 		echo -n "Running zaphpec_enable: "
-		/usr/sbin/zaphpec_enable >& /dev/null
+		/usr/sbin/zaphpec_enable 2> /dev/null
 	elif [ $system = redhat ]; then
 		action "Running zaphpec_enable: " /usr/sbin/zaphpec_enable
 	fi
@@ -205,12 +205,12 @@ RETVAL=0
 case "$1" in
   start)
 	# Load drivers
-	rmmod wcusb >& /dev/null
-	rmmod wcfxsusb >& /dev/null
-	rmmod audio >& /dev/null
+	rmmod wcusb 2> /dev/null
+	rmmod wcfxsusb 2> /dev/null
+	rmmod audio 2> /dev/null
 	if [ $system = debian ]; then
 	    echo -n "Loading zaptel framework: " 
-	    modprobe zaptel ${ARGS} >& /dev/null && echo -n "done"
+	    modprobe zaptel ${ARGS} 2> /dev/null && echo -n "done"
 	    echo "."
 	elif [ $system = redhat ]; then
 	    action "Loading zaptel framework: " modprobe zaptel ${ARGS}
@@ -229,7 +229,7 @@ case "$1" in
 	echo -n "Loading zaptel hardware modules:"
 	for x in $MODULES; do 
 		eval localARGS="\$${x}_ARGS"
-		if modprobe ${x} ${ARGS} ${localARGS} >& /dev/null; then
+		if modprobe ${x} ${ARGS} ${localARGS} 2> /dev/null; then
 			echo -n " $x"
 			echo "."
 		fi
@@ -244,11 +244,11 @@ case "$1" in
 	
 	if [ ! -e /proc/zaptel/1 ]; then
 		echo "No functioning zap hardware found in /proc/zaptel, loading ztdummy"
-		modprobe ztdummy >& /dev/null
+		modprobe ztdummy 2> /dev/null
 	fi
 	if [ $system = debian ]; then
 	    echo -n "Running ztcfg: " 
-	    $ZTCFG >& /dev/null && echo -n "done"
+	    $ZTCFG 2> /dev/null && echo -n "done"
 	    echo "."
 	elif [ $system = redhat ]; then
 	    action "Running ztcfg: " $ZTCFG
@@ -281,7 +281,7 @@ case "$1" in
   reload)
 	if [ $system = debian ]; then
 	    echo -n "Reloading ztcfg: "
-	    $ZTCFG >& /dev/null && echo -n "done"
+	    $ZTCFG 2> /dev/null && echo -n "done"
 	    echo "."
 	elif [ $system = redhat ]; then
 	    action "Reloading ztcfg: " $ZTCFG
-- 
cgit v1.2.3